Jump to content

Silicone Grease (For Gaskets)

rodabod

By rodabod
in Watch Repairs Help & Advice

 Share

Recommended Posts

rodabod Distinguished Member

rodabod

Posted
Posted

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
54 minutes ago, rodabod said:

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

Doesn't say it's silicon grease? 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted

It's like Bergeon KT-22? It says silicon grease but it doesn't smell like silicon? And it's not working very good either? Have used it on gaskets and it makes the gasket stick to the crowntube in no time. Use Seiko silicon grease . That's the best? 

  • Like 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
17 hours ago, rodabod said:

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

That is  a Silicon applicator for gaskets. The foam/sponge is Impregnated with the silicone. I have used these applicators for many years with no issues. The gasket/ring is laid inside & then the lid is closed and twisted a few times to apply the silicone.

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
  • Author
Posted

Thanks. My concern is specifically if the grease is actually silicone or not. I've opened watches with dissolved gaskets before, and it's quite probable that they've been dissolved by hydrocarbon-based greases. This stuff smells hydrocarbon based to me (a bit like shoe polish). 

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
2 hours ago, rodabod said:

Thanks. My concern is specifically if the grease is actually silicone or not. I've opened watches with dissolved gaskets before, and it's quite probable that they've been dissolved by hydrocarbon-based greases. This stuff smells hydrocarbon based to me (a bit like shoe polish). 

I'll be surprised if it is not Silicone. There are different types of silicone for example I have a small tub of "Seiko" silicone which is clear and very tacky. I have also some silicone that I purchased on the cheap from ebay and is it white and does not seem as tacky but it is however silicone. I suspect this is the type of silicone that is used in these pads to allow for easier transfer. 

Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
Posted

Back to your original question I don't really see you can do anything about it anyway if Cousins are insisting it is silicone.

Interesting point you raise though about KT-22. Bergeon don't say their version is silicone, I have some from an American company that doesn't  mention silicone and it certainly doesn't look like silicone. Yet both Cousins and Walshs call it silicone (well, Walshs call it silicon for some reason). Makes me wonder if the word is being used incorrectly to mean gasket grease or something like that?

Stephen

  • Like 2
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
On 11/15/2017 at 5:36 PM, rodabod said:

Is Bergeon KT22 definitely silicone? I've seen it advertised as silicone, but their website does not mention the word "silicone", whereas their other gasket grease does mention that it is silicone. 

Cousisnuk sell it as silicone grease. There is an other Bergeon product called silicon 7 . Interesting i will contact Bergeon and ask. 

Link to comment
Share on other sites
  • 3 weeks later...
ramrod Super WRT Addict

ramrod

Posted
Posted

I guess this begs the question: why is something OTHER than silicone used for case back gaskets if it destroys  them? 

I've had numerous Omega F300 casebacks that I've had to soak in lighter fluid to be able to dig them out of their groove. They were mush and turned into a sticky black mess merely from age.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Michael1962
      404 Club

      By Michael1962 · Posted

      On the link that I posted, ne of the watches has no crown and another has an a crown that is not square to the case. Does a broken crown signify that the movement may be quite corroded, hence the stem has broken,  and does the bent crown simply signify that the stem is bent? Unfortunately as the seller has a bid on the items, he is now reticent to prise the casebacks off in case he damages something. The seller did reply with this email though. Hi again Michael - brief descriptions; Oris x 2, dials and hands ok and they set ok and one I just wound and it has been running for a few of minutes as I write this response. Rocar, dial ok no crown. No name dial no good and can't pull crown out to set. Roma dial and hands ok, I think it is pin pallet movement. Unicorn, good dial and hands and plexiglass ok for age. All cases and plexiglasses show wear except as mentioned. I have no idea what movements are fitted or condition so please if you do consider bidding, please do so accordingly as I don't like to disappoint my customers - regards and thanks again for your interest - Jim
    • B1N9S
      Show us your military watch

      By B1N9S · Posted

      The incomplete Vertex DD is a new project to sort out.  The Seiko gen 1, is my favourite watch to wear and is my daily.      
    • B1N9S
      Hello from Wales, UK.

      By B1N9S · Posted

      To be fair it was a beautiful 'bumper'.  But, there was some loose parts in the case.  Perhaps 'pig' was a bit excessive 😄.    
    • oldhippy
      New member

      By oldhippy · Posted

      Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
    • watchweasol
      New member

      By watchweasol · Posted

      Hello and welcome to the forum.   Enjoy
×
×
  • Create New...