Jump to content

Hi from Perth, Western Australia

dhsmith50

By dhsmith50
in Introduce Yourself Here

 Share

Recommended Posts

dhsmith50 New Member

dhsmith50

Posted
Posted

Hi all,

 

Just gotten bitten by the horology bug and bitten BAD!

Have spent some silly money on a cheapo kit; then started adding some more serious minor tools.

Become and ebay addict (just gone 'cold turkey' on that one lol) and have purchased a whole pile of trainer watches.

Have focused on good old CCCP era watches baecause they are a)Cheap, B) apparently reasonably well made c) Some REALLY interesting designs (check out their 1980's Olympics designd DE-CRAZZZYYY!)

Have become a bit of a fan of Vostok's and Polja's (sic)...what so bad about Raketa's.

When I am all grown up (lol); I'm moving onto Elgin's Hamilton's and Waltham's (with the odd solid silver British fob) and then I might move into fusee's.

 

Stripped my first medium sized ladies movement (you guessed it - cheap ) last night and...no big deal (thankyou The Watchman Video's - that guy's a LEGEND).

 

What can I say [ it's fun.

 

It's like stripping car engines...with tweezers (and you can pack it all away in a box at the end of the day).

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Hello from me. If you are just starting out I always advise people to start with pocket watches ( not fusee ones) the movements are very much the same only a lot bigger then a watch. Just practices taking apart and the putting back together and learn the names of the parts. There's plenty on this forum for beginners as well as advanced. Old Russian movements from the 70's aren't as well made as Swiss movements, a simple Swiss movement is a lot easier to work on.   

Link to comment
Share on other sites
arkobugg WRT Addict

arkobugg

Posted
Posted
4 hours ago, dhsmith50 said:

Hi all,

 

Just gotten bitten by the horology bug and bitten BAD!

Have spent some silly money on a cheapo kit; then started adding some more serious minor tools.

Become and ebay addict (just gone 'cold turkey' on that one lol) and have purchased a whole pile of trainer watches.

Have focused on good old CCCP era watches baecause they are a)Cheap, B) apparently reasonably well made c) Some REALLY interesting designs (check out their 1980's Olympics designd DE-CRAZZZYYY!)

Have become a bit of a fan of Vostok's and Polja's (sic)...what so bad about Raketa's.

When I am all grown up (lol); I'm moving onto Elgin's Hamilton's and Waltham's (with the odd solid silver British fob) and then I might move into fusee's.

 

Stripped my first medium sized ladies movement (you guessed it - cheap ) last night and...no big deal (thankyou The Watchman Video's - that guy's a LEGEND).

 

What can I say [ it's fun.

 

It's like stripping car engines...with tweezers (and you can pack it all away in a box at the end of the day).

A warm welcome from me, It has only been great to be member here from day one....I have learned a lot.....enjoy....

Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

Welcome, nice to see someone else from Perth WA on here too.

If you decide you want to get more serious the Master Clock and Watch Makers of Western Australia does night classes on watch and clock repair.

I'm currently just finishing my first year on the course.

I think the last spot for the 2017 course was just filled, but if you are interested I would still suggest you put your name down as someone may pull out.

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Welcome to the forum dh! Let me suggest to also watch Mark's videos. They might not be exactly about Russian watches but the overall techniques and procedures apply. Good source for learning and progression towards your future plans.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Khan
      Stem broken - can it be rescued?

      By Khan · Posted

      Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
    • Bonefixer
      AS2063 - hand setting

      By Bonefixer · Posted

      The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • mthomas828
      Balance staff sourcing?

      By mthomas828 · Posted

      Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
×
×
  • Create New...