Jump to content

Hurricane Matthew


Recommended Posts

Matthew is getting close now, we have the  obligatory hurricane CrockPot Beef Stew cooking, 50 mph gusts right now. The eye will get hear this evening. The two bridges to get off Oak Island North Carolina (where I live) have closed. Tornado watch in effect, my wife and I are safe and cozy and so are my watches.

matthew.JPG

Link to comment
Share on other sites

Hi Tim,

We got it already...it missed us for 20 miles. It looked kind of lost looking for your address! I was ready for anything and wearing my tuna can Seiko! Those watches are notorious to inspire fright on Hurricanes and such. That's the reason it backed up in the last minute! :)

In a serious note, I hope it goes easy on you guys. This is a huge hurricane that has already cause a lot of deaths and wreckage along its path.

Stay safe!

Cheers,

Bob 

PS. It might still double back and get to us, they say! Not taking my tuna can Seiko off yet! and...I didn't give it your address! :)

 

  • Like 1
Link to comment
Share on other sites

Thanks for the best wishes. Right now it's raining like a cow peeing on a flat rock, "As They Say"

On a happier note I just finished cleaning and replacing the mainspring on a Waltham size 18 15 jewel pocket watch. It came without a case, but I had a nice salesmen sample size 18 case to show off the beautiful movement. The case is just base metal but it looks good. Now I have to time it, which I am not very good at.

Here are a couple of pictures. Capture9.JPGCapture 4.JPG

  • Like 2
Link to comment
Share on other sites

34 minutes ago, bobm12 said:

Hi Tim, how did you guys fared with Matthew?

 

We did fine, a lot of trees pruned of their dead branches by the 70 mph wind gusts, a few roof shingles gone , as one would expect. Folks who were foolish enough to build right on the beach have had real expensive damage. This was my sixth hurricane , so we knew what to expect.   And as I said I got my watch cased up so It had it's good points.

Thanks for asking

 

  • Like 3
Link to comment
Share on other sites

On 10/8/2016 at 5:58 PM, TimFitz said:

Thanks for the best wishes. Right now it's raining like a cow peeing on a flat rock, "As They Say"

On a happier note I just finished cleaning and replacing the mainspring on a Waltham size 18 15 jewel pocket watch. It came without a case, but I had a nice salesmen sample size 18 case to show off the beautiful movement. The case is just base metal but it looks good. Now I have to time it, which I am not very good at.

Here are a couple of pictures. Capture9.JPGCapture 4.JPG

Amazing how much quality went into these pieces.

Great restoration !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The UK lots can be a 404 hit or miss, 6 - 10 watches can come in anywhere from 20 - 50 quid. I once had a 404 division of 8 watches for a fraction over 30 quid, one of them was a Smiths Astral model National 17 an absolute certainty for winner contender. The crystal was scrached up to the point of being very difficult to see the brand, something triggered a gut feeling in me and it paid off.
    • I just picked up this Mondaine quartz watch on tradera.com for £11. It's a non-runner so I will replace the Ronda movement (£10.95 at Cousins), polish the case, replace the case-back gasket, and replace the mineral crystal. Now, the problem is finding a suitable crystal. The original crystal is slightly domed (2.4mm thick dome), measures 36.4mm in diameter, and is 1.3mm thick at the edge. The closest I can get on CousinsUK is 36.5mm in diameter, 3.1mm thick dome, and 1.5mm thick at the edge. I think the replacement crystal would look OK, but the problem is finding a suitable glass gasket. The case diameter for the glass gasket is 36.9mm and the closest glass gasket I can find on CousinsUK is either 36.8x36.0mm or 37.0x36.2mm. I guess one of those glass gaskets could work but as you can see there's no way the 36.5mm domed crystal would fit the inner diameters of those glass gaskets. I guess I will have to give up on a domed crystal, no? So, the backup plan is to use a (1.5mm) thick flat mineral crystal as the diameters come in increments of 0.1mm. But, what glass gasket would be the better option? The one with an outer diameter of 36.8 (0.1mm too small) or the one with an outer diameter of 37.0mm (0.1mm too large). Again the case diameter for the glass gasket is 36.9mm. I believe I read or heard that the crystal diameter should be 0.1mm wider than the inner diameter of the glass gasket. Is that correct? I'm sorry for all the numbers. I've tried to make it as clear as I could. So, I'd appreciate your thoughts on this. BTW, measuring and sourcing crystals and gaskets is extremely time-consuming! 😓
    • Lots to choose from... Just sayin'.
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
    • New one on me too.  Is that corrosion on the crown wheel?  Let us know how you get on. 
×
×
  • Create New...