Jump to content

Hibernation


Recommended Posts

Winter is coming and clening will be a real headache for me. My improvised workshop is outside the house in the boiler room (the furnace here is out of order). There will be really cold and even if just put the loupe on it is getting damp. Parts will dry slower. And if i get them inside water condeses immediatelly on the cold parts. Not to mention those two small and evil creatures playing ball inside which are potential danger to anything  :) I see no chance to install a working corner inside. 

So i have two choices. Hibernation like a bear and no tinkering delicate parts at all until spring or get my parts and tools at weekends to my workplace where i can do fine work undisturbed. 

Link to comment
Share on other sites

13 hours ago, SSTEEL said:

With temperatures as low as -35 here in the winter, I wouldn't like to work outside in that on a watch.

 

Keep warm!

-35?    ?? :) About once a year we have -15 here in Hungary in the coldest night. 

Started persuading my wife to hand me over one of her cabinets but seems hopeless until now...

Link to comment
Share on other sites

Did you tried the red rose in bloom present on the dinner table. And candles...and maybe order some Chinese or Italian food if you can't cook...just make the table pretty and have a bottle of some spirit she likes, handy....Not to confuse with white spirit. That is only for cleaning watches! :)

 

  • Like 1
Link to comment
Share on other sites

i have the opposite problem in florida , its over 100 degrees in my shop with no air conditioning on , in the winter here its only in the 30 degree F range for a few days then in the 50,s most mornings, MY loving wife moved my watch bench into our bedroom,,,,, its warm and she can keep an eye on me i guess,, HA!, anyway its been the best since i dont have a real office any more. its under the window  and GREAT what a wife!!!! kind of HARD doing watches with her laying there NAKED, i think she had something else in mind,,,,,,play first work later,

  • Like 1
Link to comment
Share on other sites

On 2016. 10. 04. at 5:50 PM, rob1crazydude said:

i have the opposite problem in florida , its over 100 degrees in my shop with no air conditioning on , in the winter here its only in the 30 degree F range for a few days then in the 50,s most mornings, MY loving wife moved my watch bench into our bedroom,,,,, its warm and she can keep an eye on me i guess,, HA!, anyway its been the best since i dont have a real office any more. its under the window  and GREAT what a wife!!!! kind of HARD doing watches with her laying there NAKED, i think she had something else in mind,,,,,,play first work later,

Well, did not much watchmaking in the past few days... chose "play" instead :) 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I'll have a look for it, but don't hold your breathe. Failing that I'll make another video when another bezel needs to be removed.
    • The UK lots can be a 404 hit or miss, 6 - 10 watches can come in anywhere from 20 - 50 quid. I once had a 404 division of 8 watches for a fraction over 30 quid, one of them was a Smiths Astral model National 17 an absolute certainty for winner contender. The crystal was scrached up to the point of being very difficult to see the brand, something triggered a gut feeling in me and it paid off.
    • I just picked up this Mondaine quartz watch on tradera.com for £11. It's a non-runner so I will replace the Ronda movement (£10.95 at Cousins), polish the case, replace the case-back gasket, and replace the mineral crystal. Now, the problem is finding a suitable crystal. The original crystal is slightly domed (2.4mm thick dome), measures 36.4mm in diameter, and is 1.3mm thick at the edge. The closest I can get on CousinsUK is 36.5mm in diameter, 3.1mm thick dome, and 1.5mm thick at the edge. I think the replacement crystal would look OK, but the problem is finding a suitable glass gasket. The case diameter for the glass gasket is 36.9mm and the closest glass gasket I can find on CousinsUK is either 36.8x36.0mm or 37.0x36.2mm. I guess one of those glass gaskets could work but as you can see there's no way the 36.5mm domed crystal would fit the inner diameters of those glass gaskets. I guess I will have to give up on a domed crystal, no? So, the backup plan is to use a (1.5mm) thick flat mineral crystal as the diameters come in increments of 0.1mm. But, what glass gasket would be the better option? The one with an outer diameter of 36.8 (0.1mm too small) or the one with an outer diameter of 37.0mm (0.1mm too large). Again the case diameter for the glass gasket is 36.9mm. I believe I read or heard that the crystal diameter should be 0.1mm wider than the inner diameter of the glass gasket. Is that correct? I'm sorry for all the numbers. I've tried to make it as clear as I could. So, I'd appreciate your thoughts on this. BTW, measuring and sourcing crystals and gaskets is extremely time-consuming! 😓
    • Lots to choose from... Just sayin'.
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
×
×
  • Create New...