Jump to content

Left-Handed Watchmakers Not Allowed?


Recommended Posts

Sometimes you just don't know which side. One day, I tried to learn playing golf. First thing you get is a set right-handed clubs, and the instructor teaches you how to swing right-handed etc. Not knowing better, you try to adapt and learn. Initially you don't hit the ball anyway, so it doesn't matter :). Then I became aware of the existence of left-handed clubs.

The instructor found some dusty left-handed clubs, a bit too short for me. I tried those and to the annoyment of the instructor, I just couldn't make up my mind.  Long story short, I ended up with right-handed, probably due to availability and both sides play were equally poor :)

Edited by Endeavor
Link to comment
Share on other sites

I am sure I have seen gravers for left hand use i.e. the angle of cut is different. If you find a lathe that can be run in inverse you could turn the lathe around so the tailstock is facing on the left. However if it has a cross slide then you are snookered. I am sure there are many operators that are left handed and have just adapted. My son is left handed and has used my lathe with no issues.

  • Like 1
Link to comment
Share on other sites

In the work-houses back in the day, watchmakers had to sit at benches very close to each other..one lefty will be forever banging elbows with his partner o. The left!

I'm just joking ! I'm half Chinese and at a Chinese dinner its impossible to eat with chopsticks if you're seated next to a lefty...it gets quite cosy at some dinners!

Anil

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

I am also left handed,

 

Chainstay,  "the lefty often has a lot more precision and dexterity (oddly enough given the meaning of "dexter"...) than average"

 

 

 

Unfortunately I must be the except to the rule

:D i am also a lefty. and i also heard that saying.

Link to comment
Share on other sites

I'm left handed but do a lot of things with my right hand.  My right eye is my dominant eye so I hold my pistol and shoot with my right hand.  Most of the type I use my eye loupe with my right eye though, again, I find I can almost use it as effectively with my left.  I also use my right hand for lathe work.  I find that for almost every thing, except writing and tying my shoes, I'm basically ambidextrous.  My watch instructor encourages us to be facile with both hands. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think you are right wish one of the two spring should make contact do you know what one?
    • So I was cleaning an especially dirty balance spring with B-dip because several turns were sticking together.  However, after a wash and dry, it seems there are more turns sticking due to the B-Dip.  I can see it clearly in-between the spring turns and it is not evaporating.  I even stretched the spring upwards a bit to let them air out and they continue to stick.  This is after two washes.  You can still see the liquid between the springs. Not sure if anyone has seen this, but I don't know if this is an indicator of my dip going bad or being contaminated.  I would rise with IPA, but the stud and collet aren't pinned--they are either glued or shellacked so I won't risk it.  If I keep seeing this, I'll probably switch back to a heptane or naphtha for this type of cleaning, but I wanted to see if anyone else has seen this with B-Dip. 
    • Hello and welcome from Leeds, England. 
    • I only watched the start, but he's out on magnification by a factor of 10. It's 7X to 45X, not 450X
    • It's one of those tools like screwdrivers and tweezers, where it's worth spending more for the quality. And it gets used all the time. At about £20, the 4040 is not expensive for Bergeon.  When putting a watch in dial down, you have to be careful not to catch a sweep second hand, but once secured, life is easy - two hands available to work on the stem.
×
×
  • Create New...