Jump to content

Hello There...

br1anh

By br1anh
in Introduce Yourself Here

 Share

Recommended Posts

br1anh New Member

br1anh

Posted
Posted

New member here from the US.  I have a few old mechanical watches that I've always had an interest in servicing myself.  I've done a fair amount of reading and background research, but hope to learn from those on here as well.  I started by building a couple of Seikomod-type watches from components, managed to slip and kink a hairspring when regulating one of them, then dove into the deep end trying to repair the hairspring.  I had the watch running reasonably again, but at some point with lots of times removing/replacing the balance, I got complacent and managed to break a balance pivot.  I'm forging ahead with some simpler projects to gain some proficiency.

Cheers,
Brian

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • luiazazrambo
      Which Watch Have You Got Coming In The Mail ? Show Us !!!

      By luiazazrambo · Posted

      I wonder whats inside, bought it blindly, not cheap at all.
    • Jon
      Rolex Cal 1570 Balance wheel rubbing

      By Jon · Posted

      Here's a quick Gif I made to show truing the balance using callipers. This has such a slight wobble, but is within acceptable parameters. The important thing is the balance doesn't touch or rub anything when in operation. This is an Eterna Tank. Here's a pic of the balance freshly rivetted with a new staff in the movement
    • spectre6000
      404 Club

      By spectre6000 · Posted

      I just poked an inflation calculator, and $5 in 2020 would be about $6 in 2024. Doesn't fit very neatly into any status codes, which stop at 5XX, but that's honestly somewhat arbitrary outside of a clever pun for those that dabble in such things. Back during the pandemic, I would spend a good chunk of idle time in the evenings scanning through hundreds of listings a night, and I would only land 1-2 a week max. I would often go months without finding something suitable. A very small percentage of the watches in the price range are worth pulling the trigger on for my purposes. The number floating through the thread here may be somewhat deceptive.
    • Zedster
      Balance cock stud screw

      By Zedster · Posted

      Hi, guys I got there in the end after several attempts using a screwdriver and Rodico, I couldn't wait for the tool to arrive and was getting pretty confident handling the stud screw without it flying away. At first, I was using far too much Rodico, and then realized you only need the smallest amount inside the screw slot. Putting the cock back onto the movement also helped as it gave me more to hold onto while my shaky hand tried to align the screw wobbling away at the end of the screwdriver😁 Anyway, job done and I can move on. Thanks again for all the advice it's really appreciated for a beginner. 
    • MikeEll
      The Theory of Horology

      By MikeEll · Posted

      I'd be interested in a copy of this book if anyone has one they'd like to sell  
×
×
  • Create New...