Jump to content

Hi Folks!

Yani365

By Yani365
in Introduce Yourself Here

 Share

Recommended Posts

Yani365 New Member

Yani365

Posted
Posted

Hi There!

I recently fell into the deep hole that is watch repair, and have been learning as I go. Recently started taking apart and reassembling Raketa movements as practice, as well as an NH36. I have a Seiko 4205-0155 on my bench that I am currently restoring, (challenging with the 17mm movement!), and have assembled two Seiko based watches with new movements. 

I have a selection of oils arriving shortly, and will dig into that, and I am saving up for a trinocular microscope to help these older eyes manage.

Looking forward to learning more!

Yani365

  • Like 2
Link to comment
Share on other sites
  • 3 weeks later...
VWatchie Distinguished Member

VWatchie

Posted
Posted
On 1/20/2024 at 4:46 PM, Yani365 said:

I am saving up for a trinocular microscope to help these older eyes manage.

Welcome Yani! Old eyes or not, a microscope is in my opinion one of the most essential tools you can get. It makes a tremendous difference.

Link to comment
Share on other sites
Waggy Distinguished Member

Waggy

Posted
Posted
1 hour ago, VWatchie said:

It makes a tremendous difference.

Completely agree, I was using other devices and after going to the scope, I don't know how I lasted this long without one. I got one with a camera which helps to take snaps during the disassembly, just in case my memory fails me and I can't remember where everything goes. I got mine from Ali Express, I was a little cautious, but after a year of use I am very happy.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Jon
      Looking for advice on removing the glass and bezel

      By Jon · Posted

      I'll have a look for it, but don't hold your breathe. Failing that I'll make another video when another bezel needs to be removed.
    • Neverenoughwatches
      404 Club Reboot

      By Neverenoughwatches · Posted

      The UK lots can be a 404 hit or miss, 6 - 10 watches can come in anywhere from 20 - 50 quid. I once had a 404 division of 8 watches for a fraction over 30 quid, one of them was a Smiths Astral model National 17 an absolute certainty for winner contender. The crystal was scrached up to the point of being very difficult to see the brand, something triggered a gut feeling in me and it paid off.
    • VWatchie
      Need some crystal replacement advice

      By VWatchie · Posted

      I just picked up this Mondaine quartz watch on tradera.com for £11. It's a non-runner so I will replace the Ronda movement (£10.95 at Cousins), polish the case, replace the case-back gasket, and replace the mineral crystal. Now, the problem is finding a suitable crystal. The original crystal is slightly domed (2.4mm thick dome), measures 36.4mm in diameter, and is 1.3mm thick at the edge. The closest I can get on CousinsUK is 36.5mm in diameter, 3.1mm thick dome, and 1.5mm thick at the edge. I think the replacement crystal would look OK, but the problem is finding a suitable glass gasket. The case diameter for the glass gasket is 36.9mm and the closest glass gasket I can find on CousinsUK is either 36.8x36.0mm or 37.0x36.2mm. I guess one of those glass gaskets could work but as you can see there's no way the 36.5mm domed crystal would fit the inner diameters of those glass gaskets. I guess I will have to give up on a domed crystal, no? So, the backup plan is to use a (1.5mm) thick flat mineral crystal as the diameters come in increments of 0.1mm. But, what glass gasket would be the better option? The one with an outer diameter of 36.8 (0.1mm too small) or the one with an outer diameter of 37.0mm (0.1mm too large). Again the case diameter for the glass gasket is 36.9mm. I believe I read or heard that the crystal diameter should be 0.1mm wider than the inner diameter of the glass gasket. Is that correct? I'm sorry for all the numbers. I've tried to make it as clear as I could. So, I'd appreciate your thoughts on this. BTW, measuring and sourcing crystals and gaskets is extremely time-consuming! 😓
    • spectre6000
      404 Club Reboot

      By spectre6000 · Posted

      Lots to choose from... Just sayin'.
    • oldhippy
      Grown up in the Field

      By oldhippy · Posted

      Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
×
×
  • Create New...