Jump to content

Left-brained introvert has finally found his people!


DanT

Recommended Posts

Hello from Vermont, everyone.   Like most here I have loved all types of timepieces and have finally taken the steps to understand them more intimately.  The servicing, cleaning, and lubricating of movements has proven to be cathartic and satisfying but now I'm looking to improve the quality of my work with your help. I am very grateful for those that have built this site up to what it is and I'm eager to put your years of experience to use.  Thank you all for sharing and I'll be sure to do the same if I can be of service.

Link to comment
Share on other sites

16 hours ago, Michael1962 said:

Welcome to the forum Dan.

Show us some photos of your work. 🙂 

Only a couple months into this new obsession but here is my first venture (outside of cutting my teeth on some Elgin pocket watches) - vintage Gruen Day/Night Jump that I picked up for $10 at a flea market.  It wasn't running but a thorough cleaning (as thorough as you can by hand without passing out from the lighter fluid fumes) and lubrication and it sprang to life.  I still need a correct strap and a new crystal but it seems to be in fine shape.  No timegrapher yet but it's on the wishlist.  The second is a vintage ladies Tissot Seastar ($20 at the same flea market) - my first jump into an automatic.  It was challenging but it came apart and went back together even with a couple weeks in between while I waited for some oils...  Eager to improve my skills and my collection with the help of this group.  Thanks for the welcome!

IMG_3289.jpeg

IMG_3293.PNG

  • Like 1
Link to comment
Share on other sites

In this case, the hour markers change colour from luminous (green) to black, typically  at 6:00 AM and black to green at 6:00 PM. This allows the luminous markers to be visible at night, and hidden during the day.

If you look carefully at the hour markers, you can see they have a window on to a disk below the dial which is printed with black and luminous chevrons which "jump" in and out of view depending  on the rotation of the disk, using a similar mechanism to the date disks on many watches.

There are other "jump" mechanisms, but in the case of this Gruen, this is what they are referring to.

There is a good example shown here -> https://farfo.com/vintage-wristwatches/gruen-precision-day-night-jump-hour-markers/

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

I've seen a couple of these on ebay, but always at prices that put them well beyond my self imposed 404 club rules, and also well north of the $10 that @DanT was lucky enough to find one for, nice find.

I'll keep an eye on the junk piles though, you never know, I might get lucky.

Edited by AndyHull
Link to comment
Share on other sites

I guess it might be popular with troglodytes and perhaps people living north of the Arctic circle in the winter.

The idea is pretty neat, but I suspect there wasn't much of a market for it as they are fairly uncommon.

Dial.jpg.ad2469b84aefcb5e3112a6b26246f98c.jpg


Having said that, I do have a couple of watches with a day/night complication in the form of a 24hr disk which exposes a sun or moon as appropriate (and always assuming you remember to set it correctly in the first place of course).

Again, arguably not very useful, but interesting to look at none the less.

Not a true "Moon Phase" complication, as those are quite a bit more complicated to engineer.

Edited by AndyHull
Link to comment
Share on other sites

3 hours ago, AndyHull said:

Having said that, I do have a couple of watches with a day/night complication in the form of a 24hr disk which exposes a sun or moon as appropriate (and always assuming you remember to set it correctly in the first place of course).

I will tell you a secret which mov.t makers don't want you to know. Take any that has date, place a pinion on the date driving wheel, a suitable dial, you have 24h indication. A disc instead of a pivot and hand, sun/moon deco-mplication. Or a 1:1 gear to a center disc and it comes like the one you have. All about doing the most with less.

  • Like 1
Link to comment
Share on other sites

5 hours ago, jdm said:

I will tell you a secret which mov.t makers don't want you to know. Take any that has date, place a pinion on the date driving wheel, a suitable dial, you have 24h indication. A disc instead of a pivot and hand, sun/moon deco-mplication. Or a 1:1 gear to a center disc and it comes like the one you have. All about doing the most with less.

And this is why I joined this group/forum; thank you for sharing!  I'm eager to learn and improve from a helpful community.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Learned a new thing today! 🤓 Looked this up and found this informative document: Watkins-MainspringGauges.pdf
    • Correct one dip is expensive when the chemical is purchased as " one dip " which is why it is mostly reserved for these two small parts as far as information tells us it is mostly tetrachloroethylene. I use it bought as perchloroethyl used in dry cleaning processes, i cant say I'm overimpressed with it though it appears to me to be shellac safe. What may be a better solution for hairsprings is a high lab grade of pure benzine.  IPA is mostly used as a rinse and water displacer and yes it does have the potential to dissolve shellac, personally i would not buy anything that has significant water dilution so 99.9% IPA is the way to go. And lastly the part you are cleaning dictates your choice of cleaning brush, delicate parts like a hairspring requires the finest artist's brush you can find. Plates and bridges can take a little more scrubbing, but always check to make sure the surface is being unharmed. And dont forget a stick of tip benzine soaked correctly shaped pegwood is your mate set up for cleaning dirty jewels and removing stubborn dried up lubrication. 
    • Hello and welcome from Leeds, England. 
    • Den / Dennison is a unit measurement of size this is actually a mainspring gauge . I haven't heard of a pivot been measured in Dennison before.  Though the small thickness gauge is  usually supplied with a Jacot tool and is more accurately known as a pivot destroyer.
    • Could it be an abbreviation for Denier? "Denier (/ˈdɛniər/) or den (abbreviated D), a unit of measure for the linear mass density of fibers, is the mass in grams per 9,000 metres of the fiber. The denier is based on a natural reference: a single strand of silk is approximately one denier; a 9,000-metre strand of silk weighs about one gram." The pivot gauge looks interesting, however I wouldn't trust myself to drive a pivot into a wedge incase it jams and gets damaged/snaps trying to get it free. More a comment on my ability and incompetence than the quality or design of the tool 🤣
×
×
  • Create New...