Jump to content

James Burton watchmaker


Recommended Posts

Hi watch and clockmakers,

could someone please check out James Burton for me? As far as I understand there are books where all of the registered? watchmakers are listed. I would like to know if there was more than one James Burton and to see what do we know about him?

Best regards,

Lui

Link to comment
Share on other sites

G. H. Baillie, Watchmaker & Clockmakers of the World Vol.1. lists;

James Burton. Whitehaven. 1795. Watchmaker.

James Burton. London (Carey St.) 1805-19. Watchmaker.

James Burton. London (Bethnal Green). 1805-08. Watchmaker.

 

Brian Loomes, Watchmaker & Clockmakers of the World Vol.2. lists;

James Burton. London, Lincolns Inn Gate. 1811. Watchmaker.

James Burton. Norwich. Late 18c.

 

Edited by Marc
Additional info
  • Thanks 1
Link to comment
Share on other sites

12 minutes ago, watchweasol said:

https://www.britishmuseum.org/collection/term/BIOG66495         

http://southlow.co.uk/documents/The Burton Family of Clockmakers.pdf

I found these for you   have a look if I dig up any more on him I will post the links.

I did hope that my new fusee pocket watch belongs to the James Burton from Whitehaven, but it seems that it doesnt. Thank you your answer.

Link to comment
Share on other sites

14 minutes ago, Marc said:

G. H. Baillie, Watchmaker & Clockmakers of the World Vol.1. lists;

James Burton. Whitehaven. 1795. Watchmaker.

James Burton. London (Carey St.) 1805-19. Watchmaker.

James Burton. London (Bethnal Green). 1805-08. Watchmaker.

 

Brian Loomes, Watchmaker & Clockmakers of the World Vol.2. lists;

James Burton. London, Lincolns Inn Gate. 1811. Watchmaker.

James Burton. Norwich. Late 18c.

 

So you have these books. Very good. What is the difference between the two volumes, I understand that the Baillie version was reviewed by Loomes, but the information in the Loomes is an addition or a correction? It seems that my James Burton is one of them from London:

I have not seen you page so far, I am going to check it out watchmender. 🙂

 

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

7.jpg

8.jpg

9.jpg

  • Like 1
Link to comment
Share on other sites

16 minutes ago, luiazazrambo said:

What is the difference between the two volumes

The easiest answer is simply to quote the opening paragraphs of the preface to volume 2 (Loomes), which state;

"This book is written as a supplement to the late G. H. Baillie's Watchmakers and Clockmakers of the World. Its function is to complement it, not replace it. The reader searching for facts on a maker should first of all turn to Baillie, since I have not replaced in this present book any maker already detailed in Volume one, unless new facts have since come to light.

This book contains entries of three distinct types: Firstly, makers from about 1820 to about 1875 (later in some instances) - Baillie did not attempt to extend his list beyond about 1825; Secondly, I have included any makers of any period who were men not known to Baillie; Thirdly, I have included some makers listed by Baillie where further information has since come to light that either extends the working period of the maker or occasionally corrects an error."

As you can see volume two (Loomes) extends and adds to volume one (Baillie) rather than replacing it, so you really need both.

 

Have a look at Watchmender, I hope you you find it useful, although I haven't updated it for sometime due to a whole load of issues including Covid and a family bereavement. I am getting back into my watchmaking though and hope to be updating Watchmender again soon.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • 1947 NOS Ambassador 'C'. Actually, the case came without the movement so the movement isn't NOS, but she sure is pretty.
    • Hi attached is the AS 20XX. Service sheet although there is no 2063 mentioned it may be of some use to you AS_AS 2060,1,2,6,4,6.pdf
    • one of the problems we have is visible versus invisible. For instance millennium disulfide another high pressure lubricant black in color. I was told by somebody worked for the Boeing company that they had a piston like device somewhere that has eight call it around it to grab it so it has to slide and in the collet has to grab. But if somebody puts that type of dry grease on where grease with that in it it embeds itself basically in the metal and they have to throw the whole part away they get use it all. So I suspect on all the dry powdery lubricants that they will go into all the basically microscopic cracks and crannies of the metaland that's where it is visually at least until you scrub it off your visually going to see it which is good because you want your lubrication the stay word is. But I'm sure it doesn't last forever on the metal it's just a really nice lubrication  
    • Thanks for the info. I can't seem to find tech sheets for those either.  I'll muddle my way though 🙂
    • Ohh spooky I have just aquired the same one mike, but mine has a drill bit inside it.
×
×
  • Create New...