-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
So true. If you don't have that, all bets are off as far as I'm concerned.
-
By Gabriel025 · Posted
Thank you for help. From the pictures that you have posted, it seems that Plate 1407B have the same holes... Brand logo is on the different place... But holes seems to be in the right places. So, needed spring are 3A, 3B and 3C. From german seller, those models are the same lenght (126mm) but different fork height (14, 14.6, 14.8). Which one would be better? Iz such a small dimension important? -
By Gabriel025 · Posted
Hi! Thank you! That's great advice! I didn't know that this is possible. I will try it today after work and see if everything will be OK. -
Hello all, my first question here - apologies if I get some terms wrong... I'm trying to fix a 25-year old Mondaine Swiss railway watch. The problem was that the time couldn't be changed, as the hands didn't move when the crown was pulled out. I opened it up to find lots of filth inside - tiny loose flakes of it all around the Ronda 763 movement. So I air cleaned it, without taking the movement apart, and tested before putting it back into the case. It worked! Put it back in the case, the stem clicked in nicely. It didn't work. Out works, in doesn't, every time. Got a new movement and stem (to save time - they're cheap). Same issue. I can't work it out, what can be wrong? I'll be grateful for any ideas. Many thanks!
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.