Jump to content

Your opinion on this west end watch


Nucejoe

Recommended Posts

4 minutes ago, Graziano said:

Hi Nucejoe, that movement looks quality with screwed jewels and bridge finishings, does it have a lever Escapement? Have seen Westend pocket watches for sale from $150 to $2000 depending on the quality and rare factor. 

Yes its swiss lever.  

I  think it might be a railroad grade, you are right looks good grade, big watch.

priced at 400 USD.

Thanks for your response

Link to comment
Share on other sites

To me the movement looks cheap very cheap. It looks like a counterfeit American movement. Yes they really did Make imitation American pocket watches or make watches that were supposed to be American pocket watches way back when.

3 hours ago, Nucejoe said:

Is this a roskopf type movement? 

Attached to that question I have a link.

https://www.worthpoint.com/articles/jewelry/history-roskopf-watch

Then it looks like I'm late to the party again as this answer was started before the reply just above. But even though you paid 400 I still think it looks cheap. Doesn't mean it's not a collectors item. Looking on eBay I see one that looks similar came from the UK and it went for $100. Unfortunately the ones on eBay at least the ones I looked at we do not get the see the movement.

Out of curiosity how do you know The case is made of silver?

 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

13 minutes ago, JohnR725 said:

To me the movement looks cheap very cheap. It looks like a counterfeit American movement. Yes they really did Make imitation American pocket watches or make watches that were supposed to be American pocket watches way back when.

Attached to that question I have a link.

https://www.worthpoint.com/articles/jewelry/history-roskopf-watch

Then it looks like I'm late to the party again as this answer was started before the reply just above. But even though you paid 400 I still think it looks cheap. Doesn't mean it's not a collectors item. Looking on eBay I see one that looks similar came from the UK and it went for $100. Unfortunately the ones on eBay at least the ones I looked at we do not get the see the movement.

Out of curiosity how do you know The case is made of silver?

 

A jeweler will apraise the silver for a nominal fee.

I haven't bought it yet.

Thanks for your response, good to know west end counterfeits were made .

Regs 

Joe

Link to comment
Share on other sites

It looks like a "Swiss Fake" which, as JohnR725 pointed out, can be fairly collectable.  EDIT: as I recall, West End Watch Co. was based out of Lancaster Pennsylvania, so reading "Swiss Made" on the dial is also why I'm guessing that.  Dollar value kinda depends on who's buying.  Not railroad grade.  Makes for an interesting rarity though.

Edited by KarlvonKoln
  • Thanks 1
Link to comment
Share on other sites

13 minutes ago, KarlvonKoln said:

It looks like a "Swiss Fake" which, as JohnR725 pointed out, can be fairly collectable.  EDIT: as I recall, West End Watch Co. was based out of Lancaster Pennsylvania, so reading "Swiss Made" on the dial is also why I'm guessing that.  Dollar value kinda depends on who's buying.  Not railroad grade.  Makes for an interesting rarity though.

Thanks for your response. 

Currently west end is mainly made in India, the story goes that lord something traveled along some Asian countries and ended his trip in India, therefore the name west end watch. 

west end is also based in leytron swiss, perhaps with many subsidieries in hard to access markets.

Regs 

joe

Link to comment
Share on other sites

The eagle with a pocket watch in its beak is a early trade mark of the West End Watch co registered in 1885, they sold some very nice watches and are still in business today, the most sort after are the watches that used movements supplied by Longines. I have three in my collection a travel alarm with movement by Angelus, a early Hermetic cased watch from the 1920's and a Sowar.

Are there any markings on the inside of the case back or inner dust cover and outside of case back ?

A brief history of the company can be seen here:

https://www.vintagewatchstraps.com/westend.php

  • Thanks 1
Link to comment
Share on other sites

4 hours ago, wls1971 said:

The eagle with a pocket watch in its beak is a early trade mark of the West End Watch co registered in 1885, they sold some very nice watches and are still in business today, the most sort after are the watches that used movements supplied by Longines. I have three in my collection a travel alarm with movement by Angelus, a early Hermetic cased watch from the 1920's and a Sowar.

Are there any markings on the inside of the case back or inner dust cover and outside of case back ?

A brief history of the company can be seen here:

https://www.vintagewatchstraps.com/westend.php

Thank you wis, I was looking forward to getting your response, will  ask for and should have the photos in 7 hrs to post. 

Regs 

Joe

Link to comment
Share on other sites

I think it's an entirely genuine West End Watch co watch I would put the date between 1885 and 1900 the case is solid silver and the serial numbers match the movement, there is damage to the dial and its missing the bow, but the engine turning on the cover is still in very good order and not rubbed.

Here is a similar example on ebay:

https://www.ebay.co.uk/itm/Vintage-West-End-Winding-Swiss-Made-Pocket-Watch-r995-Old-Antique/164650214052?hash=item2655eae2a4:g:HgIAAOSw0~de5k6R

They are asking £199.00 which I doubt they will get I would think its worth between £60.00 and £80.00

  • Thanks 1
Link to comment
Share on other sites

2 minutes ago, wls1971 said:

I think it's an entirely genuine West End Watch co watch I would put the date between 1885 and 1900 the case is solid silver and the serial numbers match the movement, there is damage to the dial and its missing the bow, but the engine turning on the cover is still in very good order and not rubbed.

Here is a similar example on ebay:

https://www.ebay.co.uk/itm/Vintage-West-End-Winding-Swiss-Made-Pocket-Watch-r995-Old-Antique/164650214052?hash=item2655eae2a4:g:HgIAAOSw0~de5k6R

They are asking £199.00 which I doubt they will get I would think its worth between £60.00 and £80.00

Thank you Wis, appreciate you putting in the time to do this.

Regs 

Joe

Link to comment
Share on other sites

8 hours ago, Nucejoe said:

Photo of the keyless

I'm willing to take the time to look up the setting parts to see if it exists in one of the older books of the fingerprint system of setting parts but I'm lazy and I won't do it unless I get a line size. The fingerprint system works best if you know what the line size of the movement. Than the problem for the older watches at least in the older book I have is that the most you might get is a name but see if the movement compares to who we think made it

11 hours ago, wls1971 said:

I think it's an entirely genuine West End Watch co watch

What's troublesome in this discussion is I thought it was a Swiss fake American pocket watch because that's what it looks like but? It turns out is made by a real company. That is not entirely a Swiss fake of an American because the fakes of American were troubling enough that the watch companies were very very unhappy because are labeled various watch company names as opposed to this kind of looking like some sort of an American watch when it's not.

Link to comment
Share on other sites

3 minutes ago, JohnR725 said:

What's troublesome in this discussion is I thought it was a Swiss fake American pocket watch because that's what it looks like but? It turns out is made by a real company. That is not entirely a Swiss fake of an American because the fakes of American were troubling enough that the watch companies were very very unhappy because are labeled various watch company names as opposed to this kind of looking like some sort of an American watch when it's not

The way the watch looks is entirely deliberate, its a marketing ploy of the time and some of the trademarks registered by West End Watch Co use the image of a train on the case they where for the most part sold into emerging markets like India and the far east hence the rather over the top look of the movement and that's where a lot of them turn up, the watches sold in Europe seem to be of a more traditional format and much more sober in design.

Link to comment
Share on other sites

  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • It looks like the canon pinion function is part of this great wheel. The pinion nearest the clip runs the minute wheel on the dual side. The pinion nearest the wheel is driven by a small wheel from under the setting lever cover plate that engages in hand setting position.    So when assembled the crown was driving the whole great train. Does this mean the pinions are too tight? Should I attempt to disassemble this great wheel and lubricants?
    • Picking up this side-tracked post again as I just removed a balance staff of a 1920's Omega (35,5L-T1) I was impressed by the way @Delgetti had his setup when he had to change out a balance-staff (https://www.watchrepairtalk.com/topic/28854-new-balance-staff-not-riveting-to-balance/page/2/#comment-244054 Not only that, but also the idea of removing the seat first before punching the staff out from the seat-side, avoiding the whole discussion of the rivet yes/no enlarging the hole. I didn't have the fancy clamps & tools Delgetti has, so I used my screw-head polishing tool. Initially I used #1500 grit diamond paste on the steel wheel, which kinda worked, but very slow. I changed to #800 grit diamond paste, which worked better, but still slow. Then I glued #240 sanding paper to the steel disk; That worked and the disk was hand-driven. Once close to the balance wheel, I took the sanding paper off and continued with #800 diamond paste. One can only do this when the balance wheel sits true on the staff and has no "wobble". I went on grinding until I saw some diamond paste on the rim of the balance wheel. This was as far as I could grind and it seemed that there wasn't much left of the seat. Carefully, with my staking set, I knocked the staff from the seat-side out. Turns out that the thickness of the seat left, now a small ring, was only 0.1mm. The balance wheel hole is in perfect shape and no damage done to the wheel at all. Of course, if the wheel has a "wobble" or isn't seated true on the balance staff, you can't get as close and there will be more left of the seat. In my case, it worked perfect 🙂 I'm very happy how this method worked out ! 😊  
    • As is tradition, one step forward, two steps back. Got the board populated and soldered into place without any issues.   But no hum. So I started testing the coils with an ohmmeter. I got 5.84k ohms across D1 (from red to red in the picture below), which is as expected. But I'm getting an open circuit for the other drive coil and feedback coil, D2 and F1 (from green to each of the two yellows).   Since the movement was working with my breadboard setup, it implies I somehow broke the connection between the coils and the solder lugs. They're all the way at the bottom of the lugs, but maybe the heat migrated down and broke the connections? I guess it's possible it happened while cleaning the flux off, but I used a soft artist's brush and isopropyl alcohol. I did a lot of high magnification examination, and I don't see any issues, but let me know if you see anything I missed or if you can think of anything else I should check.
    • 1947 NOS Ambassador 'C'. Actually, the case came without the movement so the movement isn't NOS, but she sure is pretty.
    • Hi attached is the AS 20XX. Service sheet although there is no 2063 mentioned it may be of some use to you AS_AS 2060,1,2,6,4,6.pdf
×
×
  • Create New...