New shop.

[markr]

I'm Moving to a different building at the same complex and will have a nice room next to my office just for watch repair.  Their is a concrete floor now.  I plan to caulk between the floor and walls and paint the floor.  Question is do I paint it white or another color for easy finding of parts?  Any other advice before moving in?

[watchweasol]

Hi Markr  I would suggest a nice pastle green, Its easier on the eye yet light enough to be able to see errant bits. the colour also has a calming effect which you may need at times

[luiazazrambo]

A nice fluffy carpet would do, would it not? 

[Poljot]

1 hour ago, markr said:

Question is do I paint it white or another color for easy finding of parts?  Any other advice before moving in?

Get into a habit of using Rodico or two sets of tweezers, or a pair of tweezers and a peg-wood stick to hold the part in place while removing or installing it. Sometimes you can use a small piece of plastic wrap on top of the movement during disassembly of certain components. It's clear plastic - you can see things and the parts are not going to fly across the room.

[markr]

1 hour ago, luiazazrambo said:

A nice fluffy carpet would do, would it not? 

shaggadelic

[watchweasol]

Yep that's the stuff you could hide an elephant in that for weeks.

[AshF]

Back when I was planning my home office I was tempted to lay artificial grass instead of carpet.  It would have been like working outside under the shade of a tree in the summer breeze.  Try that.

[jdm]

On 11/27/2020 at 9:56 PM, markr said:

 Their is a concrete floor now.  I plan to caulk between the floor and walls and paint the floor. 

I would not like concrete floor in a rough mechanical shop, and it would drive me crazy for a watchmaking or any other precision shop. I do not know what kind of climate you have but just an average winter would make expensive and difficult to geet a comfortable temperature to work in. Anything else from the cheapest wood flooring to linoleoum or tiles would be better.

[Tudor]

I think that a "brown" color was suggested in the book I'm reading.

So, perhaps cork? It's somewhat softer; low bounce for parts, and provides that contrast for shiny parts. But you can still roll an office chair on it.

Or maybe have the floor re-poured like a shower floor, with a big magnet at the low spot?

[markr]

I am putting a box of sand under my desk so I can take off my shoes and wiggle my toes like I'm at the beach.

[jdm]

 

25 minutes ago, markr said:

I am putting a box of sand under my desk so I can take off my shoes and wiggle my toes like I'm at the beach.

Go all the way then