Jump to content

Vintage omega 18k ladies watch

Rishah

By Rishah
in Watch Repairs Help & Advice

 Share

Recommended Posts

Rishah Watch Enthusiast

Rishah

Posted
Posted

I have come to own a vintage ladies omega watch and it has a 18k gold stamp on its back. Can anyone advise what should be fair value of this watch ( I am considering it should be worth something being omega and gold and all ). And what would be the best channel to sell it. The watch is in working condition IMG_20201119_220400.thumb.jpg.d6112099b3e8e01d5ca661b331055bce.jpg

Thanks in advance 

IMG_20201119_220347.jpg

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

A ward of advice. This applies to the UK. Do not except the first offer. If it is a genuine Omega you need to take it to around three different places to see how much they will offer you. It will depend on the weight of the gold. Any thing that is not gold they will remove that might include the glass if the case is gold. Do you intend to sell it for scrap or or are you wanting an insurance value they will ask you as the prices differ a hell of a lot. Are you sure it is a genuine Omega? If you are not sure post a photo of the movement and we can tell you. Just make sure you don't get taken for a ride.

  • Like 1
Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
2 hours ago, oldhippy said:

Are you sure it is a genuine Omega? If you are not sure post a photo of the movement and we can tell you. Just make sure you don't get taken for a ride.

I would be suspicious if this is a real Omega? It might be but that stamping on the back looks pretty bad. The movement would really give us a clue.

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted
38 minutes ago, JohnR725 said:

I would be suspicious if this is a real Omega? It might be but that stamping on the back looks pretty bad. The movement would really give us a clue.

That is why I asked because those hands don't look like Omega hands. They look like something you would find on an inexpensive watch the same goes for the winding button.  

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

On a wider point many vintage watches that were incased in either Silver or Gold have had their movements removed for the scrap value of the metals. Hence on eBay you will find hundreds of pocket watch movements with NO case. Sad but a fact.

Link to comment
Share on other sites
Rishah Watch Enthusiast

Rishah

Posted
  • Author
Posted

Sorry was not in town so couldn't upload the pics , I opened up the movement and though I am no expert it looks like you all are right , it definitely looks a fake. I really never knew that there are fakes for the vintage watches . Sad ?

IMG_20201120_064256.jpg

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Michael20
      Questions about my Bravingtons Renown Mantel Clock

      By Michael20 · Posted

      I was wondering whether anyone could assist with some questions I have about my latest acquisition, which is a two train ‘Bravingtons Renown’ mantel clock - Pics attached I have done some reading about Bravingtons and believe they sourced movements from various suppliers, so I wondered whether anyone recognises this one. I have stripped and cleaned the movement and the clock is now running well, but there are a couple of dodgy brass springs that I would like to replace. I haven’t found anything suitable searching the internet so I wondered does anyone know of a supplier that might help. Last question is about the veneer on the case, it is generally in reasonable condition but there are a couple of patches on the top where the veneer has lifted. So far, I have tried to reactivate the existing adhesive by heating from below and above with a hair drier, then clamping for a day or two. It has improved slightly but the bulge is still visible. I’d be grateful for any advice if anyone has dealt with this sort of repair before.
    • watchweasol
      Insert the movement inside the case

      By watchweasol · Posted

      Hi some pictures o& the movement and case would be appreciated so we can ascertain what the problem is you are having in fitting the movement.   Thank you.
    • dnhb
      First pendulum clock tinker

      By dnhb · Posted

      Thank you very much,T. I'll try turning the arbour from the clock face end very carefully in case I haven't reassembled the suspension block correctly (I had to make up a suspension spring using remnants of a broken one as I haven't been able to find an exact replacement online).
    • watchweasol
      Digital Watch

      By watchweasol · Posted

      Hi murks a picture of the front as well would help,   By the size of the plate it was stuck to I would suggest a coin cell,  2030,  2015 all depends on the height of the cell. And the space when the back is fitted.         3 volt. 
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      We seem to have gone a bit quiet on this ?  Do we all agree to ask Mark for some input on this matter, or is no-one really bothered. 
×
×
  • Create New...