Jump to content

It’s about time we had another clock competition


oldhippy

Recommended Posts

6 hours ago, rodabod said:

On D, it’s the open mainsprings which are the first clue, plus the shoddy plates!

How old is that fourth one anyway?  Were American clockmakers still using mortise/tenon & wedges to hold the movement together in place of screws well after we started calling ourselves "USA" in the very late 1700s?  

Link to comment
Share on other sites

With out looking at that movement in any detail I would say around 1890's. With these clocks it can be quite easy to date if the label is still with the clock. It is a typical movement of its country, crude in every way, nothing fancy but robust, behind those massif springs is a force you do not want anything to go wrong and end up with a busted hand. 

Still waiting for a winner. One is causing a bit of a problem, someone is very close. 

Link to comment
Share on other sites

Clock A painted case is typical of one European country  and is reminiscent of  a Mora clock also from that country so I would say Sweden

Clock B is a triple pad top verge fusee and is English

Clock C is a German Lenzkirch bracket clock in walnut veneer case, these turn up quite regular a small movement in a large  case around 1900, popular at auction and in good condition fetch £600-£800  with all Ting Tangs its the case that makes the difference in price.

Clock D  The model T-Ford of the clock world produced for ease and low cost of production for the masses typical American

  • Like 1
Link to comment
Share on other sites

7 hours ago, oldhippy said:

Correct. He always wins. He has a vast knowledge of clocks.  

Which would amount to one side of a postage stamp compared to yourself ?

I do own a horological mystery clock, that no one has ever been able to attribute country or maker to they turn up now and again its large 8 bell bracket clock with St Michael chimes and is spring driven with a unusual off set barrel arrangement and underslung bell nest. It has many attributes that make people either say French or German, but many think they come from Slovakia I shall make a seperate post of it and see if anyone knows.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • My mentor has been using one of the Chinese clones for several years. Seems to work very well. Just put the object you wish to demagnetize in the centre of the cross and press the button. One word of caution though, the quality and QC of Chinese clones can vary a lot. You'll never know whether you got a gem or a lemon.
    • You could also use a very fine artist's brush to brush between the coils.  If you get a size 00 or even 000 that should be small enough for convenience, and with bristles so fine that they are incapable of damaging the hairspring.  Get a good one though, like Windsor-Newton or similar.  I have never had a Windsor-Newton brush shed on my art or other work.  You want a soft brush that will not shed.
    • Sounds interesting but how do you push the button if you’re holding both ends? the large current draw overheats after 3-5 seconds and the thermister triggers. A great tool for magnetizing things but I’ve not be able to ever demag anything with it because the emf is so strong it pulls the item off center (down or up).   I paid $89 bucks for it from  CAS-KER, if someone on the board wants it I’d gladly sell it for $25 plus shipping (probably US only otherwise postal costs are prohibitive). Just sent me a note offline.
    • Hi. First thing to do is measure your oil movement as the vx32E and the 43 look very similar but one is a couple of mill smaller the vx32E.  Also the canon pinion heights differ attached tech sheets for 7N22. And  VX43, check details on the sheets. 7N22A_29A_33A_42A_43A.pdf VX43.pdf Hattori VX32E - Specification.pdf Hattori VX32E - Disassemble.pdf
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
×
×
  • Create New...