Jump to content

I thought this would be relaxing.

Tom32

By Tom32
in Introduce Yourself Here

 Share

Recommended Posts

Tom32 Member

Tom32

Posted
Posted

Hi all,

I'm a frontline emergency services worker in London and started watching Mark's video's on YouTube as a form of relaxation and destressing after work.  I eventually convinced myself I could build my own watch. So I ordered an automatic movement, watch case, dial, hands and strap.

I broke the first movement, the dial doesn't fit the case, and I'm now waiting for delivery of a dial spacer I didn't know I needed when I started this project in January. So if nothing else I've started to examine my understanding of patience.

I've had a great time reading around the subject of horology and have started getting the materials together for my second watch. Learning to maintain them will be the long term goal. In the meantime, I'll be asking for your help to put them together.

Please bear with any obvious questions and thank you in advance for any guidance offered.

All the best,

Tom

Link to comment
Share on other sites
Tom32 Member

Tom32

Posted
  • Author
Posted
1 hour ago, watchweasol said:

Hello and welcome Tom to the forum,  At least you can put it down and have a pint and start again in a better light, as far as that goes ther is no pressure.  two attachments that might be of use to you.    Cheers

TZIllustratedGlossary.pdf 4.2 MB · 1 download TimeZone Watch School Home.html 8 kB · 1 download

Thank you for these attachments and encouragement, they will prove hugely useful I'm sure!

Link to comment
Share on other sites
Tom32 Member

Tom32

Posted
  • Author
Posted
12 minutes ago, Nucejoe said:

Welcome to the forum. You didn't break the whole movement, I hope! A true watch maker never throws any broken part away, at worst you have bunch of spare parts.

Thank you. Hopefully not, I hope to fix it one day, or at least you it for parts/practice as you say.

Link to comment
Share on other sites
AndyHull Distinguished Member

AndyHull

Posted
Posted
1 hour ago, Tom32 said:

I broke the first movement

I'm pretty sure we have all broken a few over the years, its all part of the learning process.

I seem to still be capable of breaking the occasional victim in "new and interesting ways" from time to time.

The skill lies in fixing more than you break, and "unbreaking" the ones you broke while trying to fix them.:P
Hairsprings are a particular favourite on the "ooops what happened there part" of this journey, followed by balance pivots. 

Unless you ran it over with a tank, I'm pretty sure your broken movement can be fixed. What exactly went wrong?

  • Like 1
Link to comment
Share on other sites
Tom32 Member

Tom32

Posted
  • Author
Posted
19 minutes ago, AndyHull said:

What exactly went wrong?

Thanks Andy. I'm all out of tanks, but sadly that does accurately describe my handling of the first movement.

While the hour/minute/seconds hands were keeping time, the date wouldn't change with the passage of 24 hours. When the stem is in position two to change the date manually, the stem just spins freely without changing the date.

I may have also upset the mechanics between using the stem to manually change the hour/minute hands as when the stem is in position one, it is making a loud clinking sound when turned that I do not hear on the second Miyota 8215 movement I am now using. It is also not moving smoothly and eventually crunches to a stop when turned.

Link to comment
Share on other sites
AndyHull Distinguished Member

AndyHull

Posted
Posted (edited)

The first few minutes might be where your issue lies. I'm not advocating stripping the movement down unless you are comfortable doing that and have the tools, but it will give you some idea of what is involved. 

Whatever the issue is, the keyless work is likely to be what has popped out of alignment.

EDIT: If you do attempt to strip it down, be aware that there are a couple of springs that like to become airborne, when you remove the three screws in that top plate. Don't say i didn't warn you. :P

 

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites
nad WRT Addict

nad

Posted
Posted

Welcome Tom

Nice introduction.

As you're finding out, Mark's experience makes it look straight forward. Don't give up though, it's a rewarding hobby once you've cracked it

Keep safe.

Sent from my moto g(6) play using Tapatalk

Link to comment
Share on other sites
Tom32 Member

Tom32

Posted
  • Author
Posted
45 minutes ago, oldhippy said:

Thank you for your introduction and welcome to this friendly forum.

Stay safe Tom.

Thank you, I look forward to increasing my knowledge and pushing my skillset.

Link to comment
Share on other sites
Tom32 Member

Tom32

Posted
  • Author
Posted
Just now, nad said:

As you're finding out, Mark's experience makes it look straight forward. Don't give up though, it's a rewarding hobby once you've cracked it

Exactly that, I also blame the music for assuming I'd be in some kind of zen state when working away.

Thank you for the post.

Link to comment
Share on other sites
Tom32 Member

Tom32

Posted
  • Author
Posted
44 minutes ago, AndyHull said:

If you do attempt to strip it down, be aware that there are a couple of springs that like to become airborne, when you remove the three screws in that top plate. Don't say i didn't warn you. :P

 

Thank you for the video, that will prove invaluable. Maybe I could do all my work in a well lit one man tent to increase the chances of finding springs that like to sprung!

The current plan is to finish the automatic watch for everyday wearing, and the quartz watch I want to use at work. As soon as that's done, I "look forward" to stripping down the mishandled movement.

It also just occurred to me that I read your introduction thread before signing up. The 404 club is an inspiring collection, being able to service and refurbish watches half as well as some of yours would be a huge achievement.

  • Thanks 1
Link to comment
Share on other sites
eccentric59 WRT Addict

eccentric59

Posted
Posted

The yoke of the keyless works is very easy to break. I should know, I did it to my first movement ... TWICE! The nice thing about using readily-available movements is that parts are easy to find and relatively affordable. Take your broken movement apart, taking LOTS of pictures in the process so you can get it back together. Inspect everything closely and see if you can find where issues might be. Even if you don't get it running you will develop some good part handling and examination skills.

 

Oh, and welcome to the forum. 

Link to comment
Share on other sites
Tom32 Member

Tom32

Posted
  • Author
Posted
31 minutes ago, eccentric59 said:

The yoke of the keyless works is very easy to break. I should know, I did it to my first movement ... TWICE! The nice thing about using readily-available movements is that parts are easy to find and relatively affordable. Take your broken movement apart, taking LOTS of pictures in the process so you can get it back together. Inspect everything closely and see if you can find where issues might be. Even if you don't get it running you will develop some good part handling and examination skills.

 

Oh, and welcome to the forum. 

That's reassuring to read, thank you. Pictures will no doubt be key, not only for me to put it back together, but also for when I come here to ask why my square peg won't fit a round hole.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      Without Our Forum

      By JohnR725 · Posted

      yes by all means let's gather up our weapons tar feathers find the nearest tree in case Mark is not agreeable to our terms on our demands and storm his Castle. I don't quite understand what you're trying to do here? In other words you want Mark to somehow guarantee that the group will live on forever no matter what? You want Mark to somehow change his business model of what is trying to do or should we just take the group away from him? oh and is quite possible that Mark never realized that his discussion group would take on a life of its own. That the members of the group would like to continue on forever.  
    • RichardHarris123
      Second hand watch market.

      By RichardHarris123 · Posted

      I'm not sentimental, I see it this way.  I inherit something I  don't like, I could sell it, buy something I do like and remember the person with the new item.  For example, I  inherit a watch ( I haven't), I don't like it, I  buy a watch I do like, every time I look at the watch, I think of the person. 
    • Neverenoughwatches
      Second hand watch market.

      By Neverenoughwatches · Posted

      A lot of it has to do with a generations attitude.  Have we reached a generation of folk yet that have no sentimental values ie. Just an object to sell . I expect my kids will sell my collection , maybe keep one valued piece. Not being in the game very long, i have no idea when the sale of old watches boomed or if it has even reached its peak yet. If we go back 20 years what were ebay sales like then, expense wise and volume ?
    • JohnR725
      Omega cal. 565 - low amplitude

      By JohnR725 · Posted

      can I ask why you're not happy? did you notice that the acceptable low 24 hour amplitude of this watch is 160°? is there any possibility that a watch company could manufacture a watch that could actually run at a low amplitude and keep time? so if they can run at 160° at 24 hours and keep time then they probably would keep time at 240° which yours seems to be doing? then if you're really unhappy with this I would recommend purchasing an original Omega mainspring. Just because the aftermarket have numbers like an Omega mainspring it doesn't mean it's the same thing. Then I would also recommend replacing the escape wheel and the pallet fork. This is what they do in the Swatch group service center if they are unhappy with anything on the other hand they have an infinite supply of spare parts.    
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      That was reason for asking for mark's input, i wasn't sure if going ahead with dealing with the contact information would be particularly well received. @oldhippy thoughts ?
×
×
  • Create New...