Jump to content

Atomic clock vs my computer


Recommended Posts

Since I just got a circa an early 1990s Longines VHP I've started tracking it to the image of a clock on the NIST Atomic clock site.  I was shocked to see my watch had lost and gained few seconds over 5 days. So today I compared it again and it was -2.74 s. Then I looked more closely at the NIST numerical clock and  image of the clock below it.  They were different, and the clock image was -2.74 and stated "your device's clock is off by 2.74 s". I never imagined the clock image was representing my varying computer clock. Bottom line it it was a relief to learn my watch is right on time and my computer clock varies. Thought I would post this in case others are looking at NIST clock like I did.

\

Henryr

Link to comment
Share on other sites

I often wonder just how precise time needs to be,I have around 80 watches, and thirty clocks and can say that the old adage is very true if you own a clock you know the time if you own more than one you are never quite sure :fpc:

  • Like 2
Link to comment
Share on other sites

Inaccurate time on PC is due to poor OS implementation which uses a single time server, often also inexact like time.windows.com. Below an article on how to change this setting to a better one, like e.g. uk.pool.ntp.org if you're in the UK, or replace uk with your country code. Doing that I have about 0.3 sec difference with the NIST web page, and that is very normal because of the delay between said USA server and a PC in e.g. Europe.

https://answers.microsoft.com/en-us/windows/forum/windows_10-other_settings/how-to-force-windows-10-time-to-synch-with-a-time/20f3b546-af38-42fb-a2d0-d4df13cc8f43

Edited by jdm
Link to comment
Share on other sites

This is very evident when trying to purchase from eBay. You're down to the last few seconds and you place a bid at the last 2 seconds and 5 others bid and you miss out. Turns out there were a couple extra seconds because your computer time and the time on the eBay servers was different. Annoying!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The Boro has changed quite a lot over the last 20 years, and not for the better. I actually moved out of the town 15 years ago to a small village not far away. Thanks for the pdf! Looks a great read. I'll get it printed today and put it on my work bench!
    • Not having all the fancy equipment, this is a way I came up with. I never said it was the best, the most ideal or the safest way. Working on balances is always a delicate task whereby full concentration & common sense should prevail. I was well aware of the "dangers" / short comings involved, hence my "warnings", as quoted above. The balance wheel of the Omega was nice true, flat and one could clearly see how much gap there was left before the grinding wheel would touch the balance wheel. I stopped when the generously applied diamond paste started to touch the rim of the balance wheel, which turned out to be with a seat thickness left of 0.1mm. Tapping the remainder of the staff out went easy and flawless. My idea of penning this article was to show/share a way which, in my case, perfectly succeeded. If deemed to risky, or if the balance wheel is not true or has a wobble, other methods have to be followed.
    • I loved his explanation of a teardown 😅 Ex military Richard Perrett, pretty knowledgeable guy.
    • I also see a bit of danger for the wheel, at least you have to keep away from it and may get a too thick rest ring. My rest rings are about 0.05 mm. Better way would be a grinding wheel touching the staff with its circumference. Frank
    • Not easy to find this one everywhere,  so it depends where you are located. Joining it back together might be possible, i have silver soldered mild steel before even with traditional plumbers lead and its a pretty strong joint, but bere in mind this is only 1mm diameter.  The join would need to be very accurate,  it not something i have heard of anyone trying before. The part no 401 is the swiss code number and relates to watch winding stems in general
×
×
  • Create New...