Jump to content

Newby Here


phoenixop

Recommended Posts

Welcome Mike. We all start somewhere. We were all in your spot at some point.

It's very important to be patient with this hobby/job, first and foremost, and also keep an eye out for various details. This way you won't rush and mess things up and you'll eventually end up figuring out how to deal with various challenges. :)

Link to comment
Share on other sites

Thanks for the welcome and caution.

My first hump is identifying several watches and a pocket watch that was in my wife's stash for many years. We just started digging through stuff and found them.

Where would be the best place to post to try to identify them as being anything other than "recycle" food.

Any help appreciated.

Mike

Link to comment
Share on other sites

12 hours ago, phoenixop said:

Where would be the best place to post to try to identify them as being anything other than "recycle" food.

Welcome here. We have a "chat about watches" section. It may seem strange but with some Swiss mov't sometime is needed to take a picture with hands and dial removed for identification. But going hands on is IMHO much more fun and rewarding.

Edited by jdm
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So I checked with my friendly local lab supplier and they can supply the following in 2.5 lt bottles: Tetrachloroethylene (B-Dip) - approx £65 Trichloroethylene (one-dip) - approx £43 n-Heptane 99% (Essence of Renata) - approx £35 Hexane - approx £45 I can't import or buy locally the 'real' products, hence the raw chemicals above. What do you think would be my best option? I'm edging towards Trichloroethylene - I know there are greater health risks, but given the very small quantities used for each treatment and 99.99% of the time it will be sealed in a jar, I think any risk is vanishingly small? This is mainly due to its assumed superior cleaning properties, or from the experience of this group, is the extra cleaning noticeable compared to its safer alternatives?
    • Unfortunately after much investigation, apparently the coil has been discontinued! Shall I get my service guy to try the solder or the conductive paint? 🎨 Final recommendation please🙏
    • Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
    • Hi, Is there a spell check function available when you are posting ? Regards CJ
×
×
  • Create New...