Jump to content

Just wanting to know.


Recommended Posts

I am sorry if this upsets some people but I am curious. Does it bother you when you buy a high end watch (Omega, Tag Heuer, etc) just to find out it has a movement you could get in a lower priced watch? What is more important to you, the name, or the quality of the watch? If I get the same movement in an Invicta why but a Tag?

Link to comment
Share on other sites

Ive written about this numerous times. Be careful....the tag and Oris lovers will pounce on you when you compare their $3000 diver watch to an invicta......they dont like being made out to be a fool. They will regurgitate the koolaid in a hearbeat. Stand by. As far as Omega....at least they do some secondary work. Ive seen the void on a 7750 between low to high be as much as 10 grand. Its nuuuuuuuts.  

Sent from my SM-G950U using Tapatalk

  • Like 1
Link to comment
Share on other sites

This is a similar problem I personally have with Movado. There is an overall cheapness (in my opinion) to them. They are basically plain and featureless and use the most basic of quartz movements. The few automatics they offer uses the midland, though reliable ETA movement (2428-2). At least brands like Invicta know they're cheap! lol. When I think Movado, I'm never inspired with quality.

Link to comment
Share on other sites

It's about branding. The same goes for many items such as cars ie a many Skoda's actually have a VW engine. Many watches have Eta movements which are owned by Swatch, Bremont brands its watches itself as British made but I noticed many have the Eta 7750 movement fitted. 

Link to comment
Share on other sites

Hi Clockboy  Its been going on for years, It was known as badge tecnology there are many watches/clocks out there using known makes of movements branded by others. Many movements we made under the eubauches stamp and fitted to a lot of brands. In the computer trade it happened as well, and as you mentioned the car trade, I once had a vauxhaul with an Izuzu engine, and a Ford capri with a german engine although the car was build in Dagenham Uk . Common practise.

Link to comment
Share on other sites

Def not a fan of mavodos either. I read all about this at one point but basically (i think) at some point durring the 70s when the digital watch came on the scene the mechanical manufacturers were taking a beating. When the dust finally settled the only one left was eta who pretty much bought all the other manufacturers.

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • 1947 NOS Ambassador 'C'. Actually, the case came without the movement so the movement isn't NOS, but she sure is pretty.
    • Hi attached is the AS 20XX. Service sheet although there is no 2063 mentioned it may be of some use to you AS_AS 2060,1,2,6,4,6.pdf
    • one of the problems we have is visible versus invisible. For instance millennium disulfide another high pressure lubricant black in color. I was told by somebody worked for the Boeing company that they had a piston like device somewhere that has eight call it around it to grab it so it has to slide and in the collet has to grab. But if somebody puts that type of dry grease on where grease with that in it it embeds itself basically in the metal and they have to throw the whole part away they get use it all. So I suspect on all the dry powdery lubricants that they will go into all the basically microscopic cracks and crannies of the metaland that's where it is visually at least until you scrub it off your visually going to see it which is good because you want your lubrication the stay word is. But I'm sure it doesn't last forever on the metal it's just a really nice lubrication  
    • Thanks for the info. I can't seem to find tech sheets for those either.  I'll muddle my way though 🙂
    • Ohh spooky I have just aquired the same one mike, but mine has a drill bit inside it.
×
×
  • Create New...