Jump to content

matabog


matabog

Recommended Posts

Hello!

I am matabog and I am a WRT member since April 14, 2014.

I never introduced myself and I believe there are some members here that find this a bit offensive. I don't want to upset anyone so here goes, though it might seem more like a description then an introduction:

I am a watch tinkerer/broker/repairer/botcher/enthusiast. Usually I brake them before struggling to repair them. I am trying to do it by the books and obtain the best results. I also learned, as one of my friend watchmaker says, that "very good" is the enemy of "good" - trying to make it perfect may result in total failure! Usually I break more then I repair and the costs are marginally bearable.

Thank you,

Bogdan

p.s. I am also a tool freak :)

 

Edited by matabog
Link to comment
Share on other sites

Hi Bogdan, Take your friends advice!. You will not fix them all, especially the old ones that have given good service for many years but are now likely very worn or broken and will need replacement parts if available which is often unlikely.  Work with mechanical sympathy and do not force anything. I was lucky as a young man to get some professional in depth training part time many years ago but I class myself as a Watch Jobber !. My strike rate including all types is about 80%. All good wishes to you. Mike.

Link to comment
Share on other sites

@matabog; Perhaps it is not per-sé the case that people are offended. Some might be, but not necessarily all.

Perhaps it's me, since I'm lately started following the forum at bit more, but I started to notice that "new members", without taking the effort of introducing themselves, pop-up in Watch Repair Advice or another chapters, ask one or a few question(s), getting all sorts of advice from helpful (steady) members and thereafter don't even bother to report back, never mind writing a "Thank you very much".

I also noticed that if&when @oldhippy asks them politely to introduce themselves before posting a question, some never do and just disappear.

Perhaps a "compulsory" introduction works a bit like a threshold, shifting the more serious people who really want to become a (long term) member from the "by-passers"?

Personally I would never knock on somebodies door, they open up and I start to ask questions. For me there is noting wrong by giving a brief introduction of yourself; at least all forum members get an idea whom they dealing with, what kind of experience the new member has etc.

I gain from the forum and try to give something back. But if forum-members are happy with energy flowing "one-direction" to by-pass "members" ...... in the end of the day, it's up to each individual forum member to decide whether to help the "stranger" or not, and how often doing so before running out of steam because there is no coal in return?

Edited by Endeavor
  • Like 2
Link to comment
Share on other sites

On 10/1/2018 at 1:39 PM, Endeavor said:

@matabog; Perhaps it is not per-sé the case that people are offended. Some might be, but not necessarily all.

Perhaps it's me, since I'm lately started following the forum at bit more, but I started to notice that "new members", without taking the effort of introducing themselves, pop-up in Watch Repair Advice or another chapters, ask one or a few question(s), getting all sorts of advice from helpful (steady) members and thereafter don't even bother to report back, never mind writing a "Thank you very much".

I also noticed that if&when @oldhippy asks them politely to introduce themselves before posting a question, some never do and just disappear.

Perhaps a "compulsory" introduction works a bit like a threshold, shifting the more serious people who really want to become a (long term) member from the "by-passers"?

Personally I would never knock on somebodies door, they open up and I start to ask questions. For me there is noting wrong by giving a brief introduction of yourself; at least all forum members get an idea whom they dealing with, what kind of experience the new member has etc.

I gain from the forum and try to give something back. But if forum-members are happy with energy flowing "one-direction" to by-pass "members" ...... in the end of the day, it's up to each individual forum member to decide whether to help the "stranger" or not, and how often doing so before running out of steam because there is no coal in return?

hi m8, welcome..again...;)

unfortunately the heritage of the new internet youngsters...looking for quick answers, don't bother to take the time to do some reading and introduce themselves...you see it on all fora...

Never mind, let's focus on those who do introduce themselves and are willing to share...

Edited by Watchtime
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I did try that last time Rich , i traced the image from the Bestfit book which is the actual size. But its more difficut to cut the shape from paper than it is to grind the steel to shape. This way is pretty easy and the final shaping is done when fitting the part. There are a couple of things i will do differently next time, clamping the 2 pieces together with a drill press will help to hold while scribing the shape in. This was a bit tricky having only one hole, if using the pins and cork the drill size needs to match the pin diameter so there is no movement at all from the template. This movement hasn't finished frying me yet, damaged thread in the plate crown wheel hole and two rubbed in cracked jewels, thats gonna be much more fun.
    • 👍 Whats not to follow OH ?  You're every inch a pro and a true gent, i always enjoy reading your answers even some of the clock stuff that i dont have a clue about. 
    • Could you print the image either enlarged or reduced to the same size as the actual part and then glue it to the steel. 
    • Next is to drill the screwhole this then provides an anchor point so the bridge doesnt slip around while scribing the shape. A cork lid, a pin and a piece of gaffer tape ( 😅 ) keeps it all in place. The hole is measured from the broken part using a hand measuring gauge. Mark the hole, punch it and drill it off to size. The awkward bit is working out where the jumper should be and the detent positions.  I remember watching a youtuber a while back do this with dividers, so i dug out my old school compasses and improvised a little. This bridge only has one hole and to find the detent positions you need two points of reference, so i just worked the second point from one of the corners, hopefully its near enough. Then scribe in the jumper using the two detent positions ( wind and time set ) that were marked and a big picture of the complete spring to look at that helps to give you a feel of where the jumper should be.   
    • Right now I'm making do with a similar micrometer (the one below is $45 shipped but you can find better deals) and a $20 stand. You do have to be excruciatingly careful measuring jewels, since there's no table, but if you don't have the $500 to throw around, it's a nice option.
×
×
  • Create New...