Jump to content

Clocks are just Childs Play

canthus
 Share

Recommended Posts

Tmuir Distinguished Member

Tmuir

Posted
Posted

I have seen working Lego clocks and Meccano clocks before, the Meccano clocks are particularly interesting, but I agree with you on this one Old Hippy that the maker does not understand how an escapement works. It has no locking and does not use what should be the pendulum to release the escape wheel, it is just providing interesting movement that looks similar to the movement an escapement makes.

This video is a bit long winded, but at the end it shows a working Verge escapement Meccano clock which is pretty cool.

https://www.youtube.com/watch?v=wKw2XDBhVpo

Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

To be honest I still have 2 Meccano fire engines sitting next to my computer, one is a set 5 Fire engine and the other is a set 9 Firetruck about 90% built.

I built them years ago, but took the wheels off and stopped building the set 9 truck as my oldest son who would of been about 5 at the time could help but play with it and kept breaking it. Being he is now 14 I could probably finish building it now.

I never had Meccano as a kid, so as an adult I used to buy old secondhand Meccano and refurbish it and use it.

I also built a set 7 Octopus fairground ride that I would power with my Stuart steam engine which was good fun, never built a clock though.

I also have an original copy of the 1976 Meccano Orrery super model plan that I would like to build one day, but it would involve some significant investment in hard to get Meccano parts.

Link to comment
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Might that be the viscous nature of oil resisting gravity H  ,  we have been comparing water and hydrophobic surfaces which are similar in principle but water is much less viscous than oil. I guess what we trying to discover is if epilame also has an adhesive trait as well as being oleophobic. 
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      But it also makes it seem less susceptible to gravity. If you place a droplet of oil on an epilame-treated surface the droplet of oil will still stay in place even if you then flip the surface from a horizontal to a vertical position. That is, the oil droplet remains anchored, and that's the purpose of epilame. If it was just a matter of creating an oleophobic surface we could probably use other, less expensive, methods!? I don't know @Waggy but my gut feeling tells me you're spot on (pun intended!). I believe the oleophobic property is a side effect of epilame which is designed to keep the oil anchored.
    • Michael1962
      I'm going to be setting up a decent little workshop here at home.

      By Michael1962 · Posted

      Saturday morning 27/4 Sunday evening 28/4 Monday evening 29/4 Floor has a drain in the middle so I am hoping that there is very little fall on it, if any. Room is about 2.5 x 2.5 metres square. Can only use about 1/2 of one wall on the right of the pictures which has a sliding glass door in it. And only about 3/4 of the wall to the left of the pictures as it has the door to the house in it. Progress. 🙂 
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      This makes much more sense now, the oil is withdrawing itself to make as little contact with the epilame as possible. Same principle as wax on a car creates a hyrophobic surface that makes the cohesive properties of water molecules pull together.  The water beads run off only when under the influence of gravity but still remain cohesively beaded up. And as mentioned earlier a pivot would keep the oil in place on a cap jewel.  Epilame on an escapement would be a different scenario, there is nothing to hold the oil in position if gravity tugs at the bead to move, plus the escape teeth pull the oil about Maybe this is why its suggested to run the watch for a short while to remove the epilame to make two oleophobic surfaces either side of the oil, creating a ring of fire 🔥 around it 😅 The oil is repelled by every surface of the epilame even that which it sits upon. So the oil pulls together to make as little contact with it as possible, but the oil cant float above that area, it can only sit there on top of it. Under gravity the oil could potentially run away as an oil bead, unless the epilame has an adhesive property which i dont think it does ? So something else keeps it in position ie a pivot under a cap jewel . But that isn't the case in a pallet jewel situation. 
    • mikepilk
      Balance wheelwheel crooked

      By mikepilk · Posted

      As with every skill it watchmaking, it takes practice. Notice at the top of the document it says, "Practical work - 40 hours".  I can get the balance wheels 'close enough' to flat, but never seem to get them perfect. Same with gear wheels. Guess I need more practice.
×
×
  • Create New...