Jump to content

Ebay flooded with Carriage clocks from China


oldhippy

Recommended Posts

4 hours ago, tictok said:

But does this mean that a clock like this will not function correctly, or for long? The sub-min I have has kept perfect time for the six months I've owned it. It has a weighty, solid feel, and doesn't (at least outwardly) look cheap or inferior.

It may function perfectly well for many years, in much the same way as a fake Rolex may function perfectly well for many years, but if you have bought one or been sold one as genuine then a deception has taken place a fake or homage that is sold as such is just that and costs much less than the real thing.

Anyone who is paying antique French carriage clock money for a modern Chinese one is being deceived and anyone who is passing off such a clock as the real article is committing a fraud.

The Chinese are churning out these things by the thousand, fine but lets never forget that they are a £50.00 product at best and if they didn't sell they would not make them but never can they be considered as good as a genuine article.

 

  • Like 1
Link to comment
Share on other sites

Sure! That's quite clear. I just wondered if they were complete rubbish. The recent "elliott" looked shoddy the more I viewed the pics.. dial and hands. If I'd paid 900 lsd for this sub-min I'd be unhappy... but I paid a tenth of that, and the seller didn't pass it of as anything but a mini brass clock. That it is. 

Link to comment
Share on other sites

https://www.ebay.co.uk/itm/French-Gilt-Brass-Oval-Carriage-Clock/184311854780?hash=item2ae9d7b6bc:g:AO4AAOSwOWNdXEgm

Not Chinese but modern. Nice clock if you like this sort of thing. Some idiot has scratched letters and numbers on the back plate. What gives it away? The screws are modern; the wells for holding the oil are different to the original French Carriage Clocks. You have to look hard but the click and click spring is not blued and looks flimsy. You can see how with modern teeth cutters have cut the teeth cut. The platform you can tell its modern but a nice one.  There is more I could say about the movement which tells me its modern but I won’t. I have just picked out the basic for you budding Carriage Clock collectors.

Link to comment
Share on other sites

 

On 5/30/2020 at 5:56 PM, oldhippy said:
On 5/30/2020 at 6:03 PM, wls1971 said:

Sounds like his missus thinks its a bigger piece of junk than he does, will be interesting to see what this fetches, I think some fool will pay over a £100.00 for it.

Someone has paid £131.00 for this piece of junk.

Link to comment
Share on other sites

1 hour ago, Chemy said:

A CONTEMPORARY BRONZE REPEATING CARRIAGE CLOCK. 24 cm high inc handle.
A CONTEMPORARY BRONZE REPEATING CARRIAGE CLOCK. 24 cm high inc handle.
https://www.the-saleroom.com/en-gb/auction-catalogues/hannams-auctioneers/catalogue-id-srhan10086/lot-fece9d84-d53b-4d4c-aa3c-abd600e6d31f

Отправлено с моего HLK-AL00 через Tapatalk
 

That is a horrid piece of junk. 

Link to comment
Share on other sites

  • 3 months later...

I think for me this is one of the worse cases of Chinese clocks that I have ever seen. Starting bid £600. I can tell you would be throwing your money away its worthless.

https://www.ebay.co.uk/itm/Large-Gilt-Bronze-Repeating-Carriage-Clock-with-Painted-Porcelain-Panels-Cherubs/264889606994?hash=item3daca6a352:g:0fIAAOSw0kpffLqI

Link to comment
Share on other sites

"Hi, sorry I don’t have an exact age however I don’t believe it is antique. I had it from a clock shop where apparently the owner had it cleaned. The cleanliness could be deceiving me though."

This is the answer I received. Possibly accurate, it's less than 100 years old.

Bod.

Link to comment
Share on other sites

10 hours ago, oldhippy said:

I think for me this is one of the worse cases of Chinese clocks that I have ever seen. Starting bid £600. I can tell you would be throwing your money away its worthless.

https://www.ebay.co.uk/itm/Large-Gilt-Bronze-Repeating-Carriage-Clock-with-Painted-Porcelain-Panels-Cherubs/264889606994?hash=item3daca6a352:g:0fIAAOSw0kpffLqI

The clock in the link provided by oldhippy is based upon an original produced by Drocourt in the 1870's the case is a Rococo style the following link shows an original retailed by Tiffany and Co :

https://www.morphyauctions.com/jamesdjulia/item/3113-400/

Link to comment
Share on other sites

  • 2 weeks later...
15 hours ago, oldhippy said:

Not a carriage clock. This is still Chinese crap in the form of a French Large Vintage Cloisonné clock. Do not bid on this pile of junk. 

https://www.ebay.co.uk/itm/Large-Vintage-Cloisonne-Seven-Day-Brass-And-Enamel-Chiming-Clock/114477727209?hash=item1aa7677de9:g:cnkAAOSwn7pfkaQc

That is awful, it looks like it was made last week, I would not give £1.50 let alone £150 for that, looks so thinly made and cheap.. 

Link to comment
Share on other sites

Not a carriage clock but another example of a Chinese fake clock, these have been turning up for the last 10 years or so and have been fetching good money they are a copy of a French swinging clock by Huguenin the first link is a copy being sold on ebay and the second link is a genuine clock:

Fake,

https://www.ebay.co.uk/itm/Antique-MYSTERY-Clock/174498295554?hash=item28a0e8af02:g:wc0AAOSwKepfmvNj

Genuine,

http://www.my-time-machines.net/Huguenin.htm

You just have to look at the quality of the wheel work with these clocks to determine that the fakes are a very poor copy.

Link to comment
Share on other sites

Ebay is full of idiots trying to rip people off. I sent this message to the seller. I'll let you know of the reply if he bothers. 

Why have you described this clock as a very rare clock saying it is buy HUGUENIN A PARIS. When it is a Chinese fake. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • Back home...printing now.  Will report results
    • Oh well, if Master @nickelsilver says it's the way to go, then it is the way to go! I stand corrected! 🫡 Are there any other places where you're supposed to remove the epilame from the contact point of rubbing? I don't think so! Thanks for the effort @Neverenoughwatches, much appreciated! 🙂👍
×
×
  • Create New...