Jump to content

How to remove case back on vintage Mido

mmarks9156
 Share

Recommended Posts

anilv Distinguished Member

anilv

Posted
Posted

There are openers which fit the flats on the back..  It unscrews off. Google "mido caseback opener".

If you have a small adjustable wrench that can work but you may need to file the ends flat. 

Anilv

  • Like 1
Link to comment
Share on other sites
Chopin Super WRT Addict

Chopin

Posted
Posted

Try a rubber ball used for case backs or anilv's suggestion but be careful not to scratch the case.

Another solution is gluing something onto the case back such as a screw driver and then rotating the case back out. The glue can be easily cleaned afterwards. Just don't use too much so that it'll drip around.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted (edited)

It is a screw back. This is the type of tool you need. It is universal, unscrews many types and comes with fittings for what you need.

https://www.esslinger.com/universal-watch-back-opener-waterproof-watch-wrench-with-pins-jaxa-style/

There are many cheap made in china ones about that are poor, I would avoid those.  

This is the type I had. Two handed type. I don't think they make this type anymore

 

image.jpeg.638251bd6cc366b8ae7c74bc471183fa.jpeg

Edited by oldhippy
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
2 hours ago, oldhippy said:

There are many cheap made in china ones about that are poor, I would avoid those.
This is the type I had. Two handed type. I don't think they make this type anymore

 

Yes they do https://www.cousinsuk.com/product/double-handed-up-to-060mm?code=C35303

BTW the Chinese single handle one are normally fine. The reason why sometime one can't open a tight caseback with it is because the watch is not hold firmly, and/or not enough vertical pressure from the top.

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
3 hours ago, Chopin said:

Another solution is gluing something onto the case back such as a screw driver and then rotating the case back out.

I recommend against that, which can be expeditious in extreme situations, but it's not a best practice. There are case opener tools for any budget, just invest in one of these.

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
Posted

It's important that Jaxa-type openers have minimal play. I've owned Indian/Chinese ones which were crap. Eventually got a Swiss two handle version which is very good.

For extremely seized case backs, I use either a large nut glued on with superglue, or if it's more extreme, I use a brass bar (to form a handle) which I adhere with two-part epoxy.

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
1 hour ago, rodabod said:

For extremely seized case backs, I use either a large nut glued on with superglue, or if it's more extreme, I use a brass bar (to form a handle) which I adhere with two-part epoxy.

I use instead a classic type bench opener and it hasn't ever failed me. Nothing messy to deal with and nothing to clean after. Changing attachment it can also open Rolex, Breitling and other proprietary case backs. Related thread:

 

Link to comment
Share on other sites
mmarks9156 Member

mmarks9156

Posted
  • Author
Posted
I use instead a classic type bench opener and it hasn't ever failed me. Nothing messy to deal with and nothing to clean after. Changing attachment it can also open Rolex, Breitling and other proprietary case backs. Related thread:
 
Thank you I'll give this a try

Sent from my SM-G955U using Tapatalk

Link to comment
Share on other sites
mmarks9156 Member

mmarks9156

Posted
  • Author
Posted
Yes they do https://www.cousinsuk.com/product/double-handed-up-to-060mm?code=C35303
BTW the Chinese single handle one are normally fine. The reason why sometime one can't open a tight caseback with it is because the watch is not hold firmly, and/or not enough vertical pressure from the top.
I have the single handle one I'll give that a shot

Sent from my SM-G955U using Tapatalk

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
Posted

I also have access to a bench top type, but you can in some instances end up with a case back that is so seized that the key slots start to crack due to the force applied. It's a particular problem with Dennison-made Smiths cases from the late 60's as the keys are shallow, and the steel is not especially strong.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Second hand watch market.

      By Neverenoughwatches · Posted

      Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
    • Albyon
      AS2031-57E solar panel - mission: impossible

      By Albyon · Posted

      Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
    • Albyon
      Insert the movement inside the case

      By Albyon · Posted

      In fact the secret is to go gently and find the way without forcing, and the movement enters without problems
    • Murks
      2813

      By Murks · Posted

      Yea a have given it a full service this movement is chinese 2813 whats the lift angle for this movement does anyone knows  and how  do a remove the default  of 52 degrees on my timegrapher?   Hi you said my lift angle is default how do a remove this from my timegrapher?
×
×
  • Create New...