Jump to content

Frustrated Seiko 7s26A search.

pmlapl

By pmlapl
in Watch Repairs Help & Advice

 Share

Recommended Posts

pmlapl New Member

pmlapl

Posted
Posted

Help please. I have a 7s26A with a loose rotor bearing. The weight is rubbing on the case back. I've spent a couple hours looking everywhere for a replacement with no luck. I did find a rotor for a 7s36 on eBay. Would that one fit? Or if any one has a suggestion for an equivalent rotor with bearing or just a bearing, it would be very helpful. Thanks in advance for any help.

Link to comment
Share on other sites
Chopin Super WRT Addict

Chopin

Posted
Posted

I know how you feel as I was in the same spot as you. In the end I sold the movement for spares and got a cheap seiko 5 with a good movement.

You can only use the 7s26a rotor, no other will fit. I don't know if the 7s26b and c variants fit...

I got my Seiko 5 for 12-14$ and it was functional, beat up on the outside, but functional and in good condition on the inside.

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
On 1/11/2018 at 4:49 PM, Chopin said:

You can only use the 7s26a rotor, no other will fit. I don't know if the 7s26b and c variants fit...

They all fit, including 7S, 4R, 6R and their SII equivalents. For details about 7S26 parts compatibility across versions check my table at: https://docs.google.com/spreadsheets/d/e/2PACX-1vRN2UULQKTfKmhRStZhDdIOIQrqd6sPB-g6x2SKyQQjOvTBjG_7TQXQhAT4f1WqAX5QAPkIimi-3jqd/pubhtml 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted
They all fit, including 7S, 4R, 6R and their NH counterparts. For details about 7S26 parts compatibility across versions check my table at: https://docs.google.com/spreadsheets/d/e/2PACX-1vRN2UULQKTfKmhRStZhDdIOIQrqd6sPB-g6x2SKyQQjOvTBjG_7TQXQhAT4f1WqAX5QAPkIimi-3jqd/pubhtml 

I think I may love you. Do you have comparison charts for any of the older ref’s? I’ve made similar for the 7Axx range, although the file got corrupted and I’ve not tried to resurrect it yet, and I have a partial one for the 6139 series.


Sent from my iPad using Tapatalk
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Second hand watch market.

      By Neverenoughwatches · Posted

      Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
    • Albyon
      AS2031-57E solar panel - mission: impossible

      By Albyon · Posted

      Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
    • Albyon
      Insert the movement inside the case

      By Albyon · Posted

      In fact the secret is to go gently and find the way without forcing, and the movement enters without problems
    • Murks
      2813

      By Murks · Posted

      Yea a have given it a full service this movement is chinese 2813 whats the lift angle for this movement does anyone knows  and how  do a remove the default  of 52 degrees on my timegrapher?   Hi you said my lift angle is default how do a remove this from my timegrapher?
×
×
  • Create New...