Jump to content

Selecting a Tension Ring crystal


Recommended Posts

I need to get a new crystal for a watch I'm working on. It has a tension ring type glass. I've never bought this type before and have a couple of questions that someone may be able to help with.

How do i measure the glass. The case opening is 32.45mm what size would be appropriate.

There seems to be a couple of types on the Cousins site. Standard and Recessed. What does recessed actually mean? the glass the came out does have a recess where the ring sits, is that what it means?

Thanks for any help.

Link to comment
Share on other sites

I'm curious as to what kind of watch it is .  Seiko has case to crystal lists .

Can you measure the old crystal diameter . A tension ring crystal will have a white or gold ring you specify when you order and be very slighter larger then the case opening .

I order from Tip Top Crystals quite a bit , and you can email Steve and ask questions .

Link to comment
Share on other sites

If your watch case have  a recess where the crystal is you should have a recessed crystal. But i think you should have a ACT crystal with chrome or gold tension ring. This is the most common crystal.  32,45 i would go for a 32,6 or maybe a 32,5 but a 32,6 would be just about right i think? 

Link to comment
Share on other sites

The glass that came out is 32.50, but I can push it in by hand, so I think 32.60 would be the one. It's only an Avia, so I assume the standard glass will be right, as stated by Roger.

 

Link to comment
Share on other sites

Since you need to order a crystal w/tension ring that is larger then the case measurement then you need to compress the edge of the crystal to get it to fit . Once the edges are in then you can seat it with a press . I usually use a press with my divers that have a crystal gasket to fit to . 

Maybe others can give their methods and opinions .

Link to comment
Share on other sites

  • 1 month later...

As a matter of information. I bought a 32.5 and it was a perfect fit. I had to use the press to get it fully in. So it seems you don't want to go too big. Also, the crystal lift tool was no use at all, as you can't compress the tension ring. I guess that's the idea really.

Anyway, that was my experience, YMMV.

Link to comment
Share on other sites

 

As a matter of information. I bought a 32.5 and it was a perfect fit. I had to use the press to get it fully in. So it seems you don't want to go too big. Also, the crystal lift tool was no use at all, as you can't compress the tension ring. I guess that's the idea really.

Anyway, that was my experience, YMMV.

Way to go ..  You got it in without damage and it stays in . Can't ask for more then that .

Link to comment
Share on other sites

  • 5 months later...

Rather than starting a new thread, can I ask about this crystal. There are so many to choose from, I'm not sure where to start. It seems the one I have the chrome ring actually holds the dial in place ie, if I put the dial in the case with out the crystal on, there is nothing stopping it falling out the front of the case.

The watch is a Tissot seastar

 

 

 

IMG_20171112_220851.jpg

IMG_20171112_221113.jpg

IMG_20171112_223519.jpg

IMG_20171112_223531.jpg

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I used to be quite active on The Lotus Forum when I owned my Esprit. I was there for so long, Bibs asked me to be a moderator. I'm not sure how long I did that for, but I think I turned into the second longest serving moderator. When I 'handed back my keys', Bibs made me a Full Forum Member. Normally this is a paid membership. My reward I suppose for helping out for many years. Bibs (forum owner) is quite active on there and if I am not wrong, don't quote me in other words, I think he once said that the money from memberships didn't cover the running cost. He adds money himself to keep it going. Does Mark have any sort of subscription scheme on here? I'll admit that I never paid to be a member on TLF. I should have. I never did. I agree that it would be a good idea that there is some sort of contingency plan for this forum. I intend on becoming more active on here. Life has just been getting in the way recently. I enrolled on Mark's watch course and was keenly doing that, but even that has had to take a back seat for a while. I am looking forward to getting back into that and also starting to do work on the clocks that I have been amassing. To do that successfully, I see myself needing to lean on the other members here. If for whatever reason this forum was to close, I think a great many of us would struggle.
    • I think we are about there, if there were still lots out there then the cost of a watch from 5 years ago would be around the same as it is now (allowing for inflation). Given that the price has gone up several times over we can only assume that supply cannot keep up with demand so we must be at or past peak supply, especially if the trend continues. I see even places like Australia, Ukraine and even South America are selling watches on eBay, picking over their stocks, mixed in with fakes and Frankenwatches etc.
    • I understand the demand bit, the generation below me 30ish are too technology engrossed to own a mechanical watch and they just dont like old stuff. I also consider myself at the getting on age of 57 to be a rare find of someone that likes old stuff, i did buy an almost 100 year old book yesterday titled " The New Modern Home " printed 1929.  Cost me a quid. What i was trying to work out is if we have reached a volume peak of watches being discovered hidden in the back of drawers.  Those watches that were hung onto until they entered the hands of the non sentimental generation. 
    • Even for myself who only started getting into watch repair/servicing during COVID I have seen a huge jump in watch prices - we have a 404 channel on this forum. When I started you could relatively easily find a watch on eBay to restore and put onto the channel, however this is now almost impossible and the only feasible solution is to buy a job lot with an average price <4.04. Even watches sold for parts/spares are 3 or four times the price of only a few years ago. Why - Either Demand must have increased in order to push up the price, or supply is reduced. I think it is a little of both, I think that most watches in the UK/US may have been picked over, which agrees with most of what @Neverenoughwatches says so supply of all kinds of vintage watches, including tat is dwindling. As a double whammy I think that more people are wanting watches, either to work on, or as a way to differentiate themselves from the Apple Watch and FitBit crowd. The upshot is that half decent watches that require restoration are now $500 instead of $100 and cheaper watches (Seiko 5 etc) are now $50 instead of $10, and even Mumbai Specials and garbage are now pushing $50 each. When - how long will this last, I think that most of the people who are returning to mechanical watches are those that have previously experienced life without them and want to return to something with a bit of personality that doesn't buzz every 10 seconds on your wrist and tell you how many steps you have done today. i.e. the 30-40+ generation. My son who is 17 has several mechanical watches but only wears one on a special occasion and is obviously only aware of them at all in part due to my hobby. I asked him the other day how many of his friends wear a watch and he told me that some use a smart watch but most just use their phones. So as I see it, demand will start to fall once the sub-thirty crowd start becoming the majority and/or the older amongst us stop buying watches and switch our attention to mobility scooters and trying to remember our bank password. Price - I think this is here to stay, even if demand does start to drop as the older generation becomes to decrepit and stops buying and the younger generation isn't interested in buying, supply will become progressively less as time goes on as more vintage watches become lost or broken beyond repair. I think the prices will plateau at some point as an equilibrium is reached as reduced demand is balanced with reduced supply, i.e. less and less people buying less and less watches. Sorry for the long ramble!
    • Hi. Use a PVA based glue, gorilla glue it dries transparent then do as advised by Old Hippy, smoothe down using very fine  0000 wire wool and either French polish or beeswax for a finish.
×
×
  • Create New...