Jump to content

Recommended Posts

Posted

Not to be confused with "Match of the Day!"

 

So hi, I'm new here and noticed that there is not a watch of the day thread, so I figured that I would start one.

 

I'm sure that many of you wear different watches that have just been worked on, acquired or whatever. I tend to wear a watch on my left wrist for a while, whereas I find myself more frequently wearing a watch on the right too that I am testing or just because it appeals to me that day. How many of you do similar and how about posting pictures of the watch of the day, week or whatever?

 

I will start it off with todays pick which is a very humble and slightly the worse for wear 1970's LCD Texas Instruments Quartz watch with super high quality plastic bezel, OK not so high a quality but still a fun simple watch with Time in hours and mins, push for seconds and date.

 

Best Wishes

 

 

 

 

  • Like 2
Posted

I tried to attach a picture but it didn't attach and now there is no option to attach or upload a picture. Do I have to remotely link one into the post from a website?

Posted

Here we go, the max filesize is stated as being 200mb, however it is actually 2mb so I have resized the original image.

post-1462-0-98664500-1444120832_thumb.jp

  • Like 5
Posted

A remote link to the likes of Photobucket would be one way.

You should be able to select a photo from your computer using the "Choose file" button. Then press the "Attach this file" button and a bar will appear indicating that the file is ready to be inserted. Finally press the "Add to post" button to insert the image into the post.

The image will be dropped where the cursor is in the text, so first ensure you place the cursor where you want the image to show.

post-124-0-55730400-1444121456_thumb.png

Remember to check the preview to make sure it is the way you want it before posting as there is a time limit place on editing.

Posted

I must have been typing the reply when you managed to do it! :)

It's a long time since I owned a liquid crystal watch, is this a type you have a particular interest in?

Posted

Yes I figured it out thanks as the attach option was hidden in the "More Options" section. I'm not used to this particular forum software but will soon get used to it.

 

I'm interested in more or less all kinds of watches, mostly mechanical analog watches but the 1970's LED and LCD watches are kind of fun too which was why I chose to wear that one yesterday. I was never a fan of them at the time but have grown to like them more over the years. You don't see many of them around anymore, especially on someone's wrist! and so it seemed appropriate to wear it.

 

As it is now a new day, a new watch was called for and the pick of te day is a slightly tidier retro Jules Jurgenson Quartz watch.

 

 

post-1462-0-32296100-1444122785_thumb.jp

  • Like 4
Posted

As a side note this topic HERE states there is a 2mb upload limit on attachments, the original I attempted to upload was 2.5mb or so and would have been the reason it didn't attach. When I click to attach it states max file upload size is 200mb which disagrees with what it is actually set at and in fact the screenshot posted above shows a 1gb upload limit which again seems to be at odds with actuality. Maybe someone got kilobytes and megabytes mixed up in the site upload settings options in the admin panel?

 

I was unable to point this out in the linked thread above as the topic is locked. :(

Posted

I wore the Sekonda today. This is one of two watches I ordered from Etsy a few months ago, the other being a Slava that shares the same movement and case, but with a different dial.

 

TSaeiBj.jpg

 

Gryf

  • Like 2
Posted

That's a pretty cool dial and it literally screams 1970's, I'd definitely wear that for a day or so if I owned it. :)

Posted

So today I opted for a salvage job, I've had a 1971 Mohamed Ali Depraz watch kicking around for ages that was missing the dial when I got it so I have just fitted a generic dial and re-cased it. It might now be a Frankenwatch but better than just sat in a plastic storage box awaiting a part that I am probably not going to come across anyway, I think I much prefer the generic dial to the original anyway and at least it is now wearable.

 

post-1462-0-88913300-1444209910.jpg

 

Above is what it would have looked like when it started life in 1971 and further below is what it looks like now.

 

post-1462-0-40216700-1444209922_thumb.jp

 

post-1462-0-65833200-1444209935_thumb.jp

  • Like 1
Posted

Wore the Shturmanskie today - a Poljot chronograph that I've owned since it was new. It's showing some wear now, mainly the missing chrono reset stud and not much chrome left on the crown. If anybody can suggest a source for Poljot parts, I'd be grateful! I think Mark recently posted a teardown of this movement.

 

Gryf

 

0PLgBqW.jpg

  • Like 3
Posted

So a new day is upon us and today is the day for something a little different. Today I chose a Dynasty Jump hour watch, I think these are possibly the manual forerunner to quartz digital watches.

 

 

 

 

post-1462-0-39095800-1444279968_thumb.jp

  • Like 5
Posted

Hi Gryf - it might be worth looking at eBay watch sellers in places like the Ukraine and Bulgaria. Some of these people sell what may or may not be "franken" watches, but it's posible they are more likely to have access to Poljot parts because of that.

 

Worth a look, perhaps.

 

Cheers,

 

Will

Posted

There are some NOS pushers on ebay from Bulgaria for $14.99 + $4.99 shipping to the USA.

 

Search for NOS two 2 Pushers POLJOT 3133 SHTURMANSKIE, Okean Chronograph 1-MWf

 

Hope that helps.

Posted (edited)

mk3 - thanks again for the eBay reference! Thanks to Buy It Now, I should have a couple of pushers winging my way from Bulgaria shortly.

 

Today's pic is my Slava with day/date calendar. This watch, plus the Sekonda pictured above, were ordered from Ukraine via this vendor on Etsy. He has some interesting stuff, if you're into Russian watches, and his prices are pretty reasonable.

 

Gryf

 

DSC_1994_zps08mksqhr.jpg

Edited by Gryf
  • Like 1
Posted

@Gryf - You are welcome, I sent you a PM with the link for a NOS crown for your watch which is $7 + $4.99 shipping from Bulgaria, maybe even from the same seller. Not sure what the protocol is on posting non-permanent links. That should give you what you need to address the issues with your watch that you wanted to take care of. I hope this helps.

Posted

Happy Friday....!

 

Wearing my Ruhla UMF ...or is it UMF Ruhla? or even VEB Uhren und Maschinenfabrik Ruhla..

 

Anyway a nice honest little watch but will probably swap out with something a bit more robust for the weekend.

 

Anilv

 

 

post-211-0-35192200-1444356265_thumb.jpg

post-211-0-30946800-1444356279_thumb.jpg

post-211-0-57187100-1444356289_thumb.jpg

  • Like 1
Posted

Today I went with a what I consider to be a nice 1965 Omega Seamaster Cosmic, I have always particularly liked this watch.

 

 

post-1462-0-16282700-1444387082_thumb.jp

  • Like 6
Posted

Hi Mk3,  I am going back to yesterday! Love your Jump Hour Watch, really nice example. After a recent trip to New York, I have in my head a little watch project for a "New York Watch" for myself, which I might base on a jump hour

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The project is still alive. The parts are roughed out from ground flat bar stock. But before I can move ahead I decided I needed to replace the spindle bearings of my milling machine. There was too much play on the spindle.. But after diasassembly and measuring the bearing spacers, it turned out that the difference in height was 1,89 mm. Way too much to achieve preload on non-paired bairings. So, the spacers need to be ground to get them to the same height so I can use a paired bearing set. To do that I need my surface grinder up and running and that needed a hydraulics overhaul. And that would be easier if I clean out my parts washer/de-greaser first..😀 So... this is getting to be one of those "I need to fix the machine I need to fix this machine to...." type of situation. Happy as a clam though 😃
    • Have a look at this discussion where I show what I use.  
    • Hello fellow watchmakers, I have a question for all of you, especially those who regularly work with the Sellita SW200-1 movement. At my workplace, we mostly handle watches with the SW200-1. As many of you might already know, this movement has a known issue with the ratchet wheel teeth breaking. However, recently, I've observed a noticeable increase in problems like: More frequent ratchet wheel teeth breakage Screws getting loose and falling off Sudden drops in amplitude And other irregular behaviors So here’s my main question: Before doing the final assembly of an SW200-1, what are the mandatory checks I should perform to ensure proper functioning and avoid post-service failures? For example, I already check: Ratchet wheel teeth condition Canon pinion friction Accuracy and amplitude Screw tightness Jewels condition But I’d love to hear from all of you — what other important things do you check during assembly? Any tips, tricks, or personal checklist items would be extremely helpful for me and ot hers working on this movement.  
    • Hello and welcome from Leeds, England. 
    • Hello and welcome from Leeds, England.
×
×
  • Create New...