Jump to content

Automatic Movement Rotor not Winding Watch

jdrichard

By jdrichard
in Watch Repairs Help & Advice

 Share

Recommended Posts

jdrichard Distinguished Member

jdrichard

Posted
Posted

So I have serviced a watch for a friend and the rotor functions when you turn it worth a toothpick, however, when I wear it for a long period, it is not Winding the watch. Kind of looks like it does not swing freely enough.

Thought? Could it be magnetism. The rotor seems a little light in weight.

Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
Posted

Remove the case back and get a photo of the movement, I'm guessing there will be a cheap 21j movement in there.  Check the oscillating weight central screw to ensure its not come loose, because if it has, there's your problem.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

He just might like to try and repair it, its a challenge so good luck in what ever you do. I would look at the auto wind first going through it in stages that is the best way of fault finding. Movements do come to an end and this just might be one as others have said its not a very good movement.  

  • Like 1
Link to comment
Share on other sites
szbalogh Super WRT Addict

szbalogh

Posted
Posted
Just now, oldhippy said:

He just might like to try and repair it, its a challenge so good luck in what ever you do. I would look at the auto wind first going through it in stages that is the best way of fault finding. Movements do come to an end and this just might be one as others have said its not a very good movement.  

I had several of such movements, non of them had an efficiently working autowinder. :unsure:

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HorologyHead
      Can someone please explain watchmaker service mark interpretation?

      By HorologyHead · Posted

      H Watch Repairers—is there is a ‘standard format’ for the service marks or codes lightly engraved inside cases of pocket watches or wristwatches?   Sometimes I can see there might be a reference to year/ month but other times am confused. I’ve included an image of the rear of a 1951 Hamilton 992B Railroad pocket watch as an example. Thank you for all information you can give, Mike
    • HorologyHead
      Intro

      By HorologyHead · Posted

      Hi to Blackminou29–am a collector/ caretaker—good luck to you following your repair course—with hindsight I wish I’d pursued a career in both watchmaker/ jeweler fields—good luck with whatever career passion you engage.   Thank you Watchweasol for posting the amazing TZIllustratedGlossary! Best wishes, Mike
    • JohnR725
      Seiko 6601 Tech Sheet?

      By JohnR725 · Posted

      yes I noticed the new site and I miss the old site. It's the unfortunate problem of the Internet here today gone tomorrow sometimes some of the stuff gets backed up and sometimes well it does not then the problem with the early Seiko's were there were not necessarily designed for distribution across the planet and as such there is no customer support for them. So trying to find early stuff like technical information or sometimes even parts list for older Seiko is is problematic. But I did find you a you tube video. A quick look he seems to take a heck of a lot of time to actually get to the service single I did not watch all that but it does look like he did disassemble or started to say there's a tiny bit here  
    • HorologyHead
      An intro…

      By HorologyHead · Posted

      RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • Endeavor
      New balance staff not riveting to balance

      By Endeavor · Posted

      The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
×
×
  • Create New...