Jump to content

Please help me identify these "IPI WATCH - Extra"


Recommended Posts

Hello,

a friend of mine recently had the questionable pleasure to deal with coordinating the inheritance of a family member. There was a lot to go through, including two watches of a brand which neither my friend, I, nor the internet knows a lot about. Both seem to be very similar, however, in one case the movement was removed from the case.

We have close to no experience with mechanical watches, so I hope one of you might can provide some clues on how old they are and if they are interesting pieces?
 

Your help is very much appreciated,

Cheers Norbert

IMG_20170109_084310.jpg

IMG_20170109_084426.jpg

Link to comment
Share on other sites

That helps a lot thank you very much. Forgive the stupid question but is that something interesting or a very run-of-the-mill giveaway piece, despite its sentimental value of course. I'm just asking since the local watchmaker said something like is not worth the effort servicing it, Therefore it is still in question if it should be repaired or keep it in it's non functional state.

Cheers and many thanks,

Bertl

Link to comment
Share on other sites

That is probably true and having a watch that works is definitely more interesting than just owning an overweight bracelet ;-)  Can you give me rough estimate what the restauration of one of these should cost if it just needs fresh oil and a cleanup? The watchmaker said something around 400€ per piece, is that a reasonable price?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • You often see the term used on old watch part boxes.  Staffs for bracelet watches, timing washers for bracelet wstches etc.
    • The Boro has changed quite a lot over the last 20 years, and not for the better. I actually moved out of the town 15 years ago to a small village not far away. Thanks for the pdf! Looks a great read. I'll get it printed today and put it on my work bench!
    • Not having all the fancy equipment, this is a way I came up with. I never said it was the best, the most ideal or the safest way. Working on balances is always a delicate task whereby full concentration & common sense should prevail. I was well aware of the "dangers" / short comings involved, hence my "warnings", as quoted above. The balance wheel of the Omega was nice true, flat and one could clearly see how much gap there was left before the grinding wheel would touch the balance wheel. I stopped when the generously applied diamond paste started to touch the rim of the balance wheel, which turned out to be with a seat thickness left of 0.1mm. Tapping the remainder of the staff out went easy and flawless. My idea of penning this article was to show/share a way which, in my case, perfectly succeeded. If deemed to risky, or if the balance wheel is not true or has a wobble, other methods have to be followed.
    • I loved his explanation of a teardown 😅 Ex military Richard Perrett, pretty knowledgeable guy.
    • I also see a bit of danger for the wheel, at least you have to keep away from it and may get a too thick rest ring. My rest rings are about 0.05 mm. Better way would be a grinding wheel touching the staff with its circumference. Frank
×
×
  • Create New...