Jump to content

Hello from Colorado


JackW

Recommended Posts

Hi,

I was recently told about this forum, from a person I bought a watch and is apparently active here... I started working on watches while I was trying to get a PhD in Geology. Ended with my masters, a good job in my chosen field and a hobby that is both fascinating, zen-like and frustrating...  I think is equal parts. Regardless, I've been building up a skill set for about 6 years now. I got into it because as a grad student I could no longer afford to have a watch maker do repairs... So I bought tools and sought out bargain watches.

I mostly seem to work on Swiss movements and am good with Gruen's movements from the Aegler Rebberg ca. 1920 to the cal 405/420 series of the 1940s. But work on Tavannes/Cyma, Omega, Longines, and a raft of others. I've a collection of about 30 or so watches and have sold or traded away about twice that at this point. Recently I've been into trench style watches and have 4 sitting on my bench. A Fulton Watch Company (with an A. Schild 13''' cal 137, a sterling cased Waltham and a pair of war-time Elgins) but also an early Gruen Curvex. 

Images attached are of a vintage Elgin I tackled earlier this year. Some American movements are a dream to work on.... others not so.

 

Cheers!

elgin_444_parts.jpg

elgin_444_train.jpg

elgin_444_assmb.jpg

elgin_444_bal_test.jpg

elgin_444_dial.jpg

Link to comment
Share on other sites

Welcome Jack. I speak from experience it is not just "American movements are a dream to work on.... others not so". But for me & many others this is the fun, fascination with horology. Also there is the never ending learning curve that just hooks you in. Enjoy the forum.

Link to comment
Share on other sites

6 hours ago, JackW said:

a hobby that is both fascinating, zen-like and frustrating...  

Welcome JackW, you hit the nail on the head with that statement. Looks like you made it over a few hurdles to get where you're at, meaning: you have made the investment in tools and researched your projects well, this is the place for friendly, honest advice. Good job on the Elgin!

Link to comment
Share on other sites

  • 2 weeks later...

Jack;   very nice pix.,   i have the same watch mvt..  cad101 dated the watch imediatly !  that shows the real value of a forum.  on the subject " American made"  here is my experience:  the first pocket  watch i "opened" was a cylindar escapement and pin set. it was pre 1900 acording to a watchmaker ?.  fortunatly,  i opened an elgin and continued collecting.    vinn

Link to comment
Share on other sites

14 hours ago, JackW said:

Hey there!

Thank you for the warm welcome.

dadistic... what part of Chicago? I lived in Logan Square for 6 years before moving to CO. Uptown before that....

Currently in Berwyn, but lived in Logan Square in my youth. We have family in Edwards Colorado, lucky for us they are right close to skiing :-)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
    • Moved in. Now working out the best place to have things so moving around the room makes sense. The wooden movement testing rig may end up being suspended from the roof with some pulleys and ropes that I salvaged from some alfresco blinds that we replaced. I always seem to salvage things from things we scrap thinking, "I have an idea what I can use these for." I hope I'm not the only one that does that. My wife hates me for it. "What are you going to do with all this crap?" Anyway, here you go. If anyone has suggestions for workflow around a room, speak up. All Ideas are appreciated. The bench on wheels will carry either a laptop or my Samsung table for using with the little camera that is on the tripod for photos while dismantling etc. The small bar fridge in the corners going to have water etc in it and I might move the coffee maker from the kitchen out there as I am the only one that uses it. I want to get an ultrasonic cleaner so I may set up some sort of cleaning rig in front of the glass of the sliding door. Where the grandmother clock is currently standing. I'm hoping that I will be able to transition my working area, which is the table that the stool is sitting in front of, fairly easily between clocks and watches. I'll be doing my best to make sure that tools for each are separatedwhen stored. Logistics. I'll have a bit of wall space for being able to hang clocks if I find some that I wish to keep or hopefully at some time to be able to hang customer clocks for monitoring after servicing/repairs. The clock on the left in the blue pillow slip and the grandmother clock are earmarked for  Jarryd and his wife, Sara. He helped me move the benches in today. And then went on to tell me that ticking clocks drive him nuts. Who doesn't like the rhythmic ticking of a clock? I have a green pad for adding to the bench for a working surface. It is not a cutting mat or one of the Bergeon mats. It is actually a green desk writing mat. Was really cheap and will do exactly what I want, I think. I also have to get the sparkies back that put our new stove in to put some power points on the walls behind the benches. Hopefully this is all going to go well. I'm excited about it. It'll beat having to live out in the garage doing it. The other thing I have to do is cut a circle or square of plastic to go over the bouncing watch or clock part black hole in the middle of the floor. I would pretty much guarantee that anything that sproings off the bench would end up going straight down that drain. 😄      I think I have been on this forum about 4 years and still yet to really strike a blow. That's a bit sad isn't it. Signed up to Mark's watch course and have yet to buy the movement for working on. Have most of the tools I think I will need so now all just a matter of will.   I have to make a crank handle for my Joe Collins spring winder as well and some spring retaining tubes as I can't find where I can buy them. I will be salvaging (here I go again) the aluminium tubing from my old hang glider which I have to scrap as I can't fly anymore and it is too old to sell. All the aluminium tubing is aircraft grade so I am hoping it will be suitable for the winder. I have also been making a bushing tool and I have just worked out that it will work well with my Dremel stand. So another thing that I can turn into a working tool. Don't know if you guys have ever seen the ad about the guy that buys himself a new 4WD and the son says "We're going to need a bigger boat." So Liz is looking at all the stuff we have to get rid of and says "We're going to need a bigger bin." Really difficult to work out how big a Dempster bin we need. Sigh.
    • So leave off the seconds. Stand the movement on its edge, its the dial edge that rests on the pad ( either rubber or cork , something that wont slip ). Use a finger of your left hand to hold the movement upright,  right hand presses the release and flicks out the stem. I do it this way so i can see what I'm under a microscope. But you could hold the movement between two fingers of your left hand, its the right that has to manipulate the stem out by pushing the release and flicking out the stem with  right ring finger nail. Sounds more complicated than it actually is. I guess you could fix a push pin to something solid, then all you need to do is push the release against the pin, leaving your right hand completely free to pull the stem out.
    • Try putting everything back together and closing the back cover. I think one of the two springs has to contact the metal casing to ground the casing. So when you press the button, it will touch the contact on circuit board and close the circuit.
×
×
  • Create New...