Jump to content

Screw case back not coming off.....


Recommended Posts

Could that be one of these snap on backs that are made to look like screw on?  I ask the question because I would have expected your press to have easily dealt with it.  Have a very close look at it with a loupe to see if there is a prise slot anywhere.

  • Like 1
Link to comment
Share on other sites

7 minutes ago, Geo said:

Could that be one of these snap on backs that are made to look like screw on?  I ask the question because I would have expected your press to have easily dealt with it.  Have a very close look at it with a loupe to see if there is a prise slot anywhere.

+1 to that. I have one watch with such a caseback :)

Link to comment
Share on other sites

It looks as if someone has had a go with a hammer and chisel. I'm wondering if the back has become cross threaded, or as others have said it is not a screw on back. Looking on Google Invicta watch backs are usually screw on and as its been pointed out the tool you have should open it. I'm still going with this is a snap on back.

Link to comment
Share on other sites

Usually when it's not a screw back, the back usually moves a little. Then I know by the way it moves it's a pop off. Does that make any sense?

I have looked for a slot, but their isn't one. I've taken a razor to it but it broke, and I'm afraid to take a dull blade to it because I might scratch it more! But I might do just that and try the dull blade opener just to see.

I even thought it was like the crown wheel screw and twisted clock-wise, But to no avail!

After all this I think I'm going to say, " send it to manufacture!"

Would you?

Diamondslayer

Link to comment
Share on other sites

Very surprising you'd struggle with a case back with equipment like that, I'm wondering if like clockboy said that maybe someone got clever with the superglue (I've seen it before first hand) 

My only suggestions are to check the condition of the nibs that slot into the caseback, so that they're not rounded or chipped or anything and also that it's sometimes helpful to put some chamois or similar between the watch and case vice, really helps keep the watch still and steady. 

Edited by Ishima
Link to comment
Share on other sites

Having spent a hour checking the net all the 1102 model watch details I can find suggest it is a counter clockwise screw back so its either glued or cross threaded as suggested before.

Link to comment
Share on other sites

If its cross threaded have you tried turning it clockwise a bit to break the bond between the male and female parts. I've had to do this on a couple of vintage screw backs in the past.

Link to comment
Share on other sites

If its cross threaded have you tried turning it clockwise a bit to break the bond between the male and female parts. I've had to do this on a couple of vintage screw backs in the past.

Wow, thanks Cad for your time! I will try to jiggle it a bit to see if it is cross threaded! If it is, should I glue it because the threads are ruined?

That's what cross threaded means right?

Link to comment
Share on other sites

If its cross threaded have you tried turning it clockwise a bit to break the bond between the male and female parts. I've had to do this on a couple of vintage screw backs in the past.

It won't move either way I turn it! I think someone put the back on off kilter and it is ruined! I am starting to give up and want to suggest sending it to Invicta!

Link to comment
Share on other sites

This may be a case for a little penarating oil the only time a little WD40 may be a good idea. I've also used boiling by sitting the case back in it to expand the case a bit then put ice on the back plate to cool it quickly to shrink it a bit and try to twist it of or you could as you say send it back to invicta but that will probably cost you.

Mick

Link to comment
Share on other sites

  • 2 weeks later...

I once met a guy who replaced watch batteries and did some repairs in his little shop, but to my shock he use to super glue all the watches that left, just so no one in the city would know how to open it and they would have to come back to his store.... I argued with him on the matter and how that was straight out cheating the customer and the profession. he shrugged it off and said it was competition with his neighbors!!!!

But i hope you get it open, try putting some torque on the press while opening and going very deliberately slow while turning.

another trick i have learened with stubborn watches is put super glue on the case back and put tweezers on there for a second and then tuen, you will have a very solid grip that won't slip, also put it in a vise while you do that. Although the watches were clear stainless steel backs so clean up was easy with acetone, you have a black case back so don't know how that would work?

 

Good luck , i wish you all the best

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • No that has never been the intention John, why give up something that ticks all the boxes ? all its about is having a backup plan.
    • There is no real alternative to this wonderful site, John is 100% correct in his summation.   Tom
    • The problem is there are no good Solutions. What we really need is a backup for Mark. In other words somebody willing to step up and take his job if for some unknown reason he is unable to continue. Not really an inactive site because if you have an inactive site then why don't we just have an active site instead of run by Mark run by a group? Yes this is the problem with this discussion do we want to take this away from Mark and start our own group? As I said there are no good Solutions and unfortunately with the Internet is everything goes away sooner or later including discussion groups they never last forever. The problem would be even if you collected everyone's email address what would you do if the group was gone? As far as websites go they're insanely cheap to make and set up and have especially if all its only purpose is a place to go in an emergency where it would have a emergency email address to reach out or updates could be posted in case of an emergency. Kind of like a civil emergency you're supposed to go someplace this would be our civil emergency website just in case the unthinkable happens. Otherwise somebody sets up an email address for emergencies you can contact us here. Oh I have a question at least for the people in the UK that are so incredibly concerned about reaching out and contacting each other why don't you just form a physical group that gets together from time to time?    
    • Looks great Michael,  just the combination of a damp cloth and iron perplexed me 😅.  Steam will swell the veneer and soften any adhesive underneath. Its amazing what you can do with a little glue, filler and refinishing, good job matey 👍
    • Hello and welcome to the forum attached a bit of reading for you TZIllustratedGlossary.pdf
×
×
  • Create New...