Jump to content

New Member

PeWe

By PeWe
in Introduce Yourself Here

 Share

Recommended Posts

PeWe New Member

PeWe

Posted
Posted

Hello all, I'm from Germany and I love it to work on watches and bring them back to live. As I'm always chasing for more watch repair related information, I found this forum by accident. I'm really suprised and happy about the wide range of information here. It's very inspiring!

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

Welcome to the forum PeWe, you should enjoy yourself here. Many thanks for the kind words about the forum, it is the great mix of friendly and knowledgeable members that make so good.

I would also like to extend a warm welcome to Klode.

Link to comment
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchfellow
      Stem broken - can it be rescued?

      By watchfellow · Posted

      I think that a 814/825 stem would work, there are a lot of compatible parts between these.
    • watchfellow
      Venus 178 hour counter creep

      By watchfellow · Posted

      Hi everyone, I put together a Venus 178 recently, but found that the hour counter "creeps" ie. runs when the chrono is disengaged. This is the similar type of setup as the Omega 861, where the hour counter is driven off the mainspring barrel, but stopped when the chrono is disengaged by a friction spring.  Am I correct in assuming that the friction spring for the hour counter driving pinion should be dry? I am guessing that the issue will be either the spring or the driving pinion, but while the driving pinion has some wear the spring looks decent.  I've attached a couple of photos in case anyone has any tips. Thanks in advance!
    • watchfellow
      Setting power reserve on LeCoultre Futurematic

      By watchfellow · Posted

      Thanks everyone for the replies. It seems setting the hand is a bit of a guessing game, and I thought there would be a very specific way to do it. Since the reserve indicator hand moves clockwise as the spring is wound, I tried setting it right at the start of the black side. But setting it there doesn't really make sense, because by the time the spring is halfway wound, the hand is only at the end of the red side... In my head halfway wound shouldn't mean the hand is still "in the red."
    • Chief
      Intro

      By Chief · Posted

      Lovely part of the country! I spend most of my days driving along the A64 for work in and around York. I'll be sure to drop plenty of questions soon! I've actually got a couple of watches on the way that I'm pretty sure I'll need some help with! They look pretty beat up from the pics but I love a challenge and an excuse to buy more tools 🤣
    • oldhippy
      Help - London Elliott Mantle Clock Night Silence

      By oldhippy · Posted

      I have two of these in my home. You need to remove the movement from the case, take off the hands and remove the dial and take a few good photos of the front plate so I can see what the problem is. The round nut unscrews and the hands pull off pull them off from the center and not the tips as you could break them. 
×
×
  • Create New...