Jump to content

Is there any reason to service a watch that runs fine?


Recommended Posts

I have a couple antique american watches that I've gotten that I never serviced because they run perfectly fine on the timegrapher and so since there is always a risk or worsening the watch when taking it apart I've done nothing to them. My question would be, isthis deleterious to the movement, is there some reason for service beyond performance? Or is the fact that these watches (one of which is over 100 years old) operate fine evidence that they do not need service.

Edited by mewherman
spelling
Link to comment
Share on other sites

  • 2 weeks later...
On 3/13/2024 at 9:04 AM, mewherman said:

I have a couple antique american watches that I've gotten that I never serviced because they run perfectly fine on the timegrapher and so since there is always a risk or worsening the watch when taking it apart I've done nothing to them. My question would be, isthis deleterious to the movement, is there some reason for service beyond performance? Or is the fact that these watches (one of which is over 100 years old) operate fine evidence that they do not need service.

there is some other things that you didn't say like how often do you run these watches? For instance if you only bring about once or twice a year to wear them and then put them back someplace safe then I really wouldn't worry about it. but if you're running them every single day then I would think about servicing them. The timing machine doesn't show everything that's happening in the watch. Like all of the metal on metal let's rubbing for instance the keyless parts the winding and setting components you won't know you're having a problem until you have a problem and then it may be to late as things disintegrate.

 

 

  • Like 3
Link to comment
Share on other sites

More arguable question  can be asked about unused NOS watches.

I have a few such pieces in my collection, so far been just winding them to run about 10 minutes, sometimes once a year or longer.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • You're thinking metal to jewel in general I guess. Maybe it would be a good idea to peg the pallet jewel hole on the main plate after the epilame treatment. I think that could work as it is my impression that the epilame doesn't sit very hard, but I could be wrong about that so feel free to educate me. I didn't remember that 9501 was thixotropic (thanks for the link). That would mean it's even runnier during impact (lower viscosity) so perhaps it's time I get some fresh grease as mine seems a bit too runny. What I have seen is a whitish surface after washing but it goes away if I scrub the surface with a brush in a degreaser (Horosolv). I don't think it embeds itself in the metal but sticks very hard to the metal. I don't worry too much about the cleaning solution. I just want perfectly clean parts and my solution can be replaced for little money (ELMA RED 1:9). Anyway, I quite often need "to strip back and rebuild" and scrubbing parts by hand isn't exactly the most stimulating part of a service.
    • I’ve had a couple movements where it is clear the previous watchmaker was diligent with lubrication but the old epilam had turned to a fine white powder covering the pallet fork and keyless parts, which can’t be good for parts. I’m spare with epi since I don’t know how long it takes to degrade to that state…
    • I have read some suggestions that it can cause wear , particularly on the fork horns of a fully treated pallet fork. I've had half a kilo of steriac acid powder on a shelf for almost a year now, might have a little play today with a heater and a jar.  I think its because it gets into their cleaning solutions Mike. Theirs or anyone else's that services the watch next time, or if they need to strip back and rebuild. Could preclean but thats all time for a pro. I thought the idea was for the epilame to create a barrier, a wall between the lubrication and anything else, so the lube cant spread.
    • As I'm only cleaning watches in small numbers at home, I pre-clean any significant deposits of old grease and oil before using the cleaning solutions. I scrape off deposits with pegwood and Rodico, and if really dirty, wash parts in naphtha with a brush.  So I'm happy using DX, but can understand why it's avoided by the pros.
    • I think attaching a nut to the lid to pull it off is the least destructive, any damage damage on the outside is going to an easier fix than any created when trying to push it out from the inside. Scratching up the inside of the lid , mainspring or arbor bearing will be risk. Just my opinion.
×
×
  • Create New...