Jump to content

New guy from NC

NTK

By NTK
in Introduce Yourself Here

 Share

Recommended Posts

NTK Member

NTK

Posted
Posted

Hi,

so love to be here. I recently got into watch repair. To be honest been few months of watching videos and I been interested in watches but never tried before. Now I decided to take the leap. Bought some basic tools and made my own watch. first time putting one together. Since then I been disassemble and assemble some older watches and love it. Love every process of it. For some reason love the challenge on making one work or cleaning it. It’s wow. I don’t know how to explain other than time flys by and I don’t notice. I can spend hours with these little guys. I drop one of the hands by mistake and kinda bend the seconds hand a bit. I just reorder the replacement lmfao. But I should get it this week. I didn’t even bother to order one before because well I got busy and watch works perfectly. 😅. But as soon as the new gold hands set arrives I will change it because I like gold color and will go better with my dragon logoIMG_5334.thumb.jpeg.3ae1cf0323ca6a3fc47187432c86cffe.jpeg

IMG_5337.jpeg

Link to comment
Share on other sites
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • DirkP121
      Hermle 340-020 slowing down as days go by

      By DirkP121 · Posted

      Update, I discovered that I could change the mainspring by removing the arbor and sliding it out from between the front and back plates. So I put a new mainspring in. This it what I  get over a 7 day period After winding                                          amplitude is 1 1/2 turns plus a few degrees.                                                                        ie just over 1 1/2 turns. 1 day after winding     gained 1 sec      no amplitude check. 2 days after winding   gained 1 sec      amplitude 1 1/2 turns                                                                                                              i.e. it lost the few extra degrees 3 days afer winding    gained 3 sec     no amplitude check 4 days after winding   gained 5 sec     amplitude 1 1/2 turns                                                                                                               i.e. unchanged 5 days after winding   gained 7 sec     no amplitude check 6 days after winding   gained 16sec    amplitude just over 1 1/4 turns 7 days after winding   gained 24sec   amplitude 1 1/4 turns. From  Based on video inspection, I am getting full pallet lock. So, my data seems to be at odds with the statement "swing of a balance wheel has nothing to do with the rate". However, I have noticed the banking posts are not controlling the lever position on the right side.  I may have some work to do here.
    • RichardHarris123
      Crown Snapped Off - Armani Renato Watch

      By RichardHarris123 · Posted

      I can't tell whether or not some stem is stuck in the crown, I  think so though.  If the crown is stainless steel you could try alum to disolve the stem of try drilling it out. If all else fails, buy a new crown. 
    • Neverenoughwatches
      Very useful Video

      By Neverenoughwatches · Posted

      Does anyone use the x5 eyepieces,  when i use them on my different amscope , the magnification changes to x5 but the field of view remains exactly the same as the x10, so nothing gained. The optical lenses can't be swapped out or at least they are not available as far as i know. 
    • mikepilk
      Very useful Video

      By mikepilk · Posted

      I think maybe we're all a bit dim @ManSkirtBrew 🤣 99% of the time I'm working with the 0.5X Barlow, so mags from 3.5X to 22.5X. When I need a close up of a pivot or jewel, I take the Barlow out, and even put in the 2X Barlow, but it's a nuisance. So like you, I had that D'oh moment, why don't I just use 20X eyepieces (WF20X/10). They take seconds to change, and you keep the working distance. The only downsides are lower field of view, and less brightness.  
    • ManSkirtBrew
      Very useful Video

      By ManSkirtBrew · Posted

      At the lowest magnification, I can just get all of a normal wristwatch size movement in field. For some things it's too much magnification, but the nice thing about the eyepieces is they only take seconds to swap in and out. I'm genuinely surprised I've never read about anyone else doing it, to be honest.
×
×
  • Create New...