Jump to content

Recommended Posts

Hello All,

I am new to this forum but I did look around it a bit when I was looking into watch tools and getting started. I have acquired a few Seiko 7009 movements to get some practice working with Seiko before I tackle a Seiko Sea Lion M44 that I bought. 

However, since I have several movements, I thought it would be nice to piece together two watches with the two cases I have.

I am having some issue sourcing/identifying the case components. In the attached image you can see two cases. The numbers on them are 7009-875J (left) and 7009-8599 (right). For the 875J, I believe the crystal and the O-ring need to both be replaced but I cannot find a suitable replacement on CousinsUK. The closest I have found was for a 7009-8750 case, which has a chrome ring that I did not find when I took the crystal off this case.

For the 8599 case, I found the XAC311.652 Sternkreuz, Seiko 310T49ANS0 on CousinsUK which seems like a fitting replacement.

Additionally, I have several movements, but I do not have the movement holder rings used to settle the movement into the case. I saw in a post by  @Waggy (

) that he has created CAD files for the movement rings, but I was wondering if those rings are universal for all 7009 movement and case combinations. Even if those work, I do not have a 3D printer, so I was wondering if there is anywhere else I could source them.

IMG_0954.jpg

IMG_0955.jpg

Link to comment
Share on other sites

2 hours ago, A333 said:

I am having some issue sourcing/identifying the case components. In the attached image you can see two cases. The numbers on them are 7009-875J (left) and 7009-8599 (right). For the 875J, I believe the crystal and the O-ring need to both be replaced but I cannot find a suitable replacement on CousinsUK. The closest I have found was for a 7009-8750 case, which has a chrome ring that I did not find when I took the crystal off this case.

maybe you need a Seiko casing guide which I would normally attach with the file sizes really big fortunately if you do a search you might find a link like this

finding casing parts for older watches can be a challenge because the watch companies do not necessarily keep the parts for all the watches they ever made because the volume of parts to be so huge they probably don't a warehouse anywhere on the planet they keep all of them.

then there's another problem that affects acquiring parts are often times watches were destined for specific markets. This means they won't stock those case parts in other countries is that country is never going to get that case for instance. We also end up with a lot of Japanese Seiko watches that were never meant to leave Japan and getting anything on those is impossible even trying to find a tech sheet for some of the vintage stuff is basically impossible

 

 

Link to comment
Share on other sites

Hey all,

Very much appreciate the welcomes and suggestions.

1 hour ago, Waggy said:

Hi there, there are a few types, but I put them all on thingiverse, just check under my profile.

I will most definitely be checking these out. I was thinking about doing this before I turned to the forum, but even then, I do not have a 3D printer. This could be a good excuse to get one and it seems there are a fair amount of tools and components that could be pretty easily 3D printed.

1 hour ago, JohnR725 said:

maybe you need a Seiko casing guide which I would normally attach with the file sizes really big fortunately if you do a search you might find a link like this

finding casing parts for older watches can be a challenge because the watch companies do not necessarily keep the parts for all the watches they ever made because the volume of parts to be so huge they probably don't a warehouse anywhere on the planet they keep all of them.

then there's another problem that affects acquiring parts are often times watches were destined for specific markets. This means they won't stock those case parts in other countries is that country is never going to get that case for instance. We also end up with a lot of Japanese Seiko watches that were never meant to leave Japan and getting anything on those is impossible even trying to find a tech sheet for some of the vintage stuff is basically impossible

 

 

I really appreciate the linking to this post. Upon some quick review I couldn't find any information pertaining to the 7009 cases I was looking for. I see case information for 7009-500 though 811 but nothing passed that. I am hoping there is some amount of compatibility between cases of the same movement so if I can find a similar style case with crystals in stock, maybe I can squeeze a fit.

Link to comment
Share on other sites

31 minutes ago, Nucejoe said:

I need three for my Grand Seiko

I was asking my material house once for something Seiko related and give it to any of the upper end lines basically know she cannot get them and don't even think about asking about the grand Seiko. I believe grand Seiko has a website and even the normal Seiko site in this country where there do the repairs you get pricing for all your watches if you look at the pricing it says anything grand Seiko goes to Japan. So my guess is if you need case parts or anything else for grand Seiko you're going to have to go to the grand Seiko website and ask nicely because that's going to be the only way.

  • Thanks 1
Link to comment
Share on other sites

3 hours ago, Nucejoe said:

the watch has to go to Japan whereas all I need is links to its bracelet

I don't think it has to go to Japan at least I wouldn't send that there. You should be able to give them the case number and whatever numbers you have off the band and perhaps a picture of it and explain that you just need some links and see if they'll help you out.

Link to comment
Share on other sites

4 minutes ago, JohnR725 said:

I don't think it has to go to Japan at least I wouldn't send that there. You should be able to give them the case number and whatever numbers you have off the band and perhaps a picture of it and explain that you just need some links and see if they'll help you out.

Its registered with Grand Seiko, they have all info about it. 

Bought it at Seiko Dubi. Send it in they keep replying.

 

Link to comment
Share on other sites

10 minutes ago, Nucejoe said:

Send it in they keep replying.

interesting? Quite a while ago I was inquiring with my local material house about a gasket for particulars Seiko data watch and the answer we got back from Seiko was send it to us. Which of course I was not going to do and basically the reason why was because they didn't have a gasket and they would fit it. I wonder if maybe grand Seiko is going to fit a new band or something?

It is kind of unacceptable customer service isn't it for something that nice inexpensive

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • £4.04 originally worked out to $5, or thereabouts accounting for currency fluctuations. Inflation calculator from 2020 (when the thread was started, though not when Andy coined the term) says we're looking at $6 currently. What currency is the 6.99 inflation adjusted figure cited in the poll? $6 may still seem restrictive, but don't forget that's part of the point. It's a challenge. Thrill of the hunt and all. Diamonds in the rough. Also, and my personal angle on the game, a fun and inexpensive way to learn watchmaking skills.
    • Dear all My first experience servicing a quartz watch after servicing as an hobby my mechanic watches for many years. This is an old Certina that was given to me by a friend, with  a ETA/ESA 9362 movement. Before service I put a new battery and the watch was working. After servicing the movement stopped working. i understand that there might be a lot of reasons for this (including the fact that I used technics and oils from mechanic movements on this one  ), but at this stage I would only need to check if the electronic module is good. Don't have a quartz tester but only a multimeter. You will see on the photos that the battery contact is broken and needs soldering. With the battery in the movement I can confirm that the electronic module had power (1.57v). Question: what basic tests can I do with a multimeter to confirm that the electronic module is good? how to check if the coil is good and if there is pulse in the electronic module? what contacts should I use to test it? (I saw some videos on you tube but was not able to find the specific test procedures for the ETA 9362). Any information to help me check if the reason for the movement to stop is on the electronic or mechanic part of the watch is much appreciated. Many thanks
    • Dear all My first experience servicing a quartz watch after servicing as an hobby my mechanic watches for many years. This is an old Certina that was given to me by a friend, with  a ETA/ESA 9362 movement. Before service I put a new battery and the watch was working. After servicing the movement stopped working. i understand that there might be a lot of reasons for this (including the fact that I used technics and oils from mechanic movements on this one 😞 ), but at this stage I would only need to check if the electronic module is good. Don't have a quartz tester but only a multimeter. You will see on the photos that the battery contact is broken and needs soldering. With the battery in the movement I can confirm that the electronic module had power (1.57v). Question: what basic tests can I do with a multimeter to confirm that the electronic module is good? how to check if the coil is good and if there is pulse in the electronic module? what contacts should I use to test it? (I saw some videos on you tube but was not able to find the specific test procedures for the ETA 9362). Any information to help me check if the reason for the movement to stop is on the electronic or mechanic part of the watch is much appreciated. Many thanks    
    • I have bought without seeing inside before and have generally been luck Michael. If its a screwback case i seem to allow some leniency on the removal of it, i dont know why because I've never struggled to remove a back with very basic equipment.   If everything is inside them, then once restored and keeping time the oris could be worth 20 -30 each, I've paid a lot more Oris date pointers in the past.
    • I use a nylon bristle from a brush to run around the coils or a thin piece of copper wire, you need .1 - .15mm.
×
×
  • Create New...