Jump to content

Hello from Brussels, Belgium

Gilles

By Gilles
in Introduce Yourself Here

 Share

Recommended Posts

Gilles New Member

Gilles

Posted
Posted

Hi Everyone,

I'm happy to join the community as a new hobbyist watchmaker.

This forum has already help me a lot but this time I didn't find the answer to my question so here I am.

I am servicing a Sellita SW200-1. I ordered a new barrel complete. Here is my question to you guys : does it need any kind of lubrication ? I believe that the mainspring is lubricated from factory but should I apply breaking on the barrel ?

Thank you,

Gilles.

 

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted (edited)

Thank you for your introduction and welcome to this friendly forum.
We all look forward to your contributions and continued involvement.  
 

If it is a complete unit you don't need to open it. It will have the correct lubrication all done at the factory.

Edited by oldhippy
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • diveboy
      404 Club

      By diveboy · Posted

      $12.50 + $6.00 shipping I do enjoy collecting ladies watches.
    • VWatchie
      Chinese clone demagnetizers

      By VWatchie · Posted

      What voltage are you feeding it?
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Maybe you had a bad one H, the cheap blue one i use has been fine for nearly 3 years now. It demags enough to stop the tiniest of screws sticking to the carbon steel tweezers i use. If it were to fail at some point in the future i very  probably would go up a level of device just because. 
    • tomh207
      Chinese clone demagnetizers

      By tomh207 · Posted

      Lot of “industrial “ de magnifiers on Aliexpress  https://www.aliexpress.com/item/1005004699640024.html?src=google&src=google&albch=shopping&acnt=708-803-3821&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&albcp=17858129175&albag=&trgt=&crea=en1005004699640024&netw=x&device=c&albpg=&albpd=en1005004699640024&gad_source=1&gclid=CjwKCAjwo6GyBhBwEiwAzQTmcxIEVpMt1vFIKQyfjVwT95zrBsOi5dt-GgFOmLamBcMcu4tO7CfaaxoChnEQAvD_BwE&gclsrc=aw.ds&aff_fcid=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&terminal_id=6b7c60e41b044cb39d1431f62cda0958&afSmartRedirect=y   a hard drive wiper/degauser would also be worth looking at.   Tom
    • VWatchie
      Chinese clone demagnetizers

      By VWatchie · Posted

      Unfortunately yes! Magnetism can wreak havoc on a mechanical watch movement if the balance hairspring becomes magnetised. The cheap blue Chinese demagnetise-rs are useless if you feed them the wrong voltage (> 110 V), and even so, they don't work very well. The one I got when I was new worked so poorly that it drove me nuts. Eventually, I was lucky to get a Greiner Magnomatic for a little money. It's an amazing tool that can be trusted to do its job perfectly in seconds. A new one comes with a price tag of  £885 excluding tax and shipping, and if you think that's a bit steep (I believe most of us would) and can't find a used one I'd go with @Jon's recommendation.
×
×
  • Create New...