Jump to content

Hi everyone!


Recommended Posts

Hi everyone! After spending a decent amount of lockdown getting absorbed in watch making and repairing videos online I’ve got an order of tools and oils arriving today. My fascination started after being gifted several vintage family watches, including a beautiful Waltham pictured below.

I’ve found a pocket watch with a working Unitas 6431/6445 that will be my starting point, and will hopefully be able to move on from there.

Cheers, Elliot

EA20BFB3-4125-4BCB-9EB9-E5DB84DF53CE.jpeg

Edited by Hutch
Updates movement No.
Link to comment
Share on other sites

That's a beautiful watch Elliot! Welcome to the forum! Quite a few folks here probably fell into this via YT videos during lockdown. We have our share of experts too, so crack open that Unitas 6431 and let us know how you're making out (and don't spill any of that oil, it's too expensive).

Link to comment
Share on other sites

Hi Elliot,   Welcome to WRT forum and good luck with your forey into horology.

6 hours ago, Hutch said:

I’ve found a pocket watch with a working Unitas 6431/6445 that will be my starting point.

 Your best option for a start is a scrap 6431 unitas, it'l also be a material house in your drawer for spare parts you may come to need when your pocket watch gets on bench for service. 

Good luck pal. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I'm very new to both watch repairing in general and this channel in particular, so I'm also still in the mode of buying/finding enough tools to enable me to strip and rebuild a mechanical watch. ( And I'm still gasping at some of the prices of these tools... ) However, it seems that some form of magnifier is a MUST and the 3x over-glasses that I already have just don't cut the mustard. I've scanned through this forum and I've read through several of the topics and I can't see this exact question aired anywhere else. And I wear corrective lens glasses - have done for forty years now.. So, a question for the hive mind, please... Should I plump for some sort of digital microscope (Andonstar or equivalent), or should I settle on some sort of optical microscope (A Brunel BM1 for example)? They both seem to be about the same price... Thanks Ian
    • What am I doing wrong.  I cannot find Elgin numbers this low in the Bestfit nor Marshall handbooks. @JohnR725I know you have the answer.
    • I have this book and it does have an extensive amount of hairspring material.  I wonder how different it is from the one you list. I was looking at the breguet section several weeks ago but did not review it in prep for this exercise. I wish I had a set of those bending tweezers.  I have been looking for them but so far, no luck.
    • I don't. If this is for a watch you own, I'd suggest sending it to Omega for service/repair. Omega is a part of the Swatch Group and (as far as I know) the Swatch Group has discontinued making their component parts available to individuals for purchase. This includes individual watchmakers. Optionally you could search online (possibly eBay) for an identical watch/movement that isn't running which is available for a reasonable cost and purchase the watch as a "donor" and remove the pieces yourself and replace them in your watch. You may also find a skilled watchmaker who can make the part from scratch however the cost may be more than you'd expect (or be willing) to pay. Good luck!
    • the slow aspect is really really important.  hairspring work is not something you rush you really want to concentrate on what you're doing yes the videos that's a classic problem with the videos. For one thing in the videos most people of videos want to make a decent video they want to make you happy they want to show a good outcome and how many videos are really realistic on this is really hard and I may not succeed? another thing helps his books this is the one I find is really good  Bench Practices for Watch And clockmakers –  Henry B. Fried (Author) 1954 1974 the book is interesting in that it came in different versions in some versions don't have all the section so some versions are missing the hairspring section. They hairspring section is really really good as it covers how to fix things with hairsprings lots of things. Although Henry tends to make everything look really really simple somewhere out there I think on YouTube is a video of him straightening hairsprings. But the book works really really nicely then Amazon can be quite amusing and somebody didn't tell the people at the last link that their book is very rare in the prices very bad just way too low in place notice Amazon prices are not desirable at all which is what sometimes happens with Amazon I have to wonder how they come up with those prices https://www.amazon.com/Bench-practices-watch-clockmakers-Henry/dp/B0006CEZ08 https://www.amazon.com/Bench-Practices-Watch-Clockmakers-Henry/dp/096562191X https://www.clockworks.com/product/bench-practices-for-watch-and-clockmakers-by-henry-b-fried                
×
×
  • Create New...