Jump to content

Movement parts

BigT

By BigT
in Introduce Yourself Here

 Share

Recommended Posts

BigT New Member

BigT

Posted
Posted

Hello I’m a newbie at watch repair 

I have fascinated by watches since I was a kid . I’m having difficulty remembering how to put a movement back together after taking apart for  a cleaning or replacing parts does anyone have any tricks to remember the order to reassemble a wrist watch movement 

any help would be greatly appreciated 

Tony13 Member

Tony13

Posted
Posted

When I started I used a tray with multiple compartments.

I grouped the parts in functions of the watch.

So train with bridge and screws in one, Barrel with bridge and screws in an other, date bits in the next and so on.

Take a good picture when it is all in bits of the tray for putting them back in the same compartments after cleaning.

Now I just know where the bits go and do not have to do that anymore but the system worked fine for me.

Nucejoe Distinguished Member

Nucejoe

Posted
Posted

Welcome to WRT forum.

Try online searching for documents on the caliber your working on, data sheet, schematic diagrams etc.

Taking piictures at every stage of disassembly is useful.

 

  • Like 1
jdm Distinguished Member

jdm

Posted
Posted
10 hours ago, BigT said:

does anyone have any tricks to remember the order to reassemble a wrist watch movement 

Beside the mentioned labelled tray, and of course taking pictures at all steps, I think the most important is that one fully understands the ins and out of the function of each single part and screw, as in why each is shaped and sized as it is, and how interacts with the next part.

That is the only way that will allow you to put it back if parts gets mixed, pictures erased, and exploded diagrams are set away for you to test yourself. Otherwise you will be more similar to a trained assembly worker than a watchmaker.

Michael1962 Distinguished Member

Michael1962

Posted
Posted

Welcome to the forum.. 🙂

Go online na hunt for the tech data sheet for the calibre of movement that you are working on.

Lots of guys on here will be able to assist as well.

HectorLooi Distinguished Member

HectorLooi

Posted
Posted

Also, check if YouTube has any videos for the calibre that you are working on. 

I'm also thinking of just leaving a video camera on to record the entire disassembly of an unfamiliar calibre.

But after awhile, you'll get the hang of things and be able to identify every part even if you jumble everything into the cleaning basket.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By VWatchie · Posted

      Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • MikeEll
      Help with repairing a quartz clock

      By MikeEll · Posted

      I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...