Jump to content

Enicar Sherpa Guide

arkobugg
 Share

Recommended Posts

arkobugg WRT Addict

arkobugg

Posted
Posted (edited)

 

Cheers mates!!   Hope everybody is good and that the pandemic is on the retreat, and the world can go back to the Normal.... Yes pls now...  🙂

Haven't I had the watch maker hobby, I will be crazy after just being at home......  he he ..

 

In that case I'm working on Enicar Sherpa Guide GMT, and need both of reversing wheels in the auto work.

The caliber are AR  166 or Enicar 1145

Does anyone know where I can buy those wheel?

As usually Thanks a lot for all help from you nice people...

Thanks

Armand

 

201740060_478245863267593_2722221862752287071_n.jpg

202081165_234276981534678_913775644416110174_n.jpg

201229462_1023526341753312_7373407569035019062_n.jpg

202718739_487421205685443_6759453703367865706_n.jpg

Edited by arkobugg
jdm Distinguished Member

jdm

Posted
Posted
19 minutes ago, arkobugg said:

Does anyone know where I can buy those wheel?

There is no secret place for parts. You can be told the very same, well known material houses plus Ebay, but these may or may not help you.

 

arkobugg WRT Addict

arkobugg

Posted
  • Author
Posted
32 minutes ago, jdm said:

There is no secret place for parts. You can be told the very same, well known material houses plus Ebay, but these may or may not help you.

 

I am fully aware that there are no secret place for parts, I have been searching for those wheel for some time, and havent been able to  find them. UK Cousin dont have them. But if you can point them out for me, it would be great.  Appreciate...thanks..

jdm Distinguished Member

jdm

Posted
Posted
11 minutes ago, arkobugg said:

 But if you can point them out for me, it would be great.  

Surely I would have done that already If I knew where to get them. And same will do our fellow memebers here. Good luck.

arkobugg WRT Addict

arkobugg

Posted
  • Author
Posted
21 minutes ago, jdm said:

Surely I would have done that already If I knew where to get them. And same will do our fellow memebers here. Good luck.

Lets hope somebody else can help me then..thanks 

  • Like 1
Marc Distinguished Member

Marc

Posted
Posted

First of all do you know what calibre it is? I think it might be an AR1146 but I can be sure.

These people may be able to help, also |Cousins do list some parts for the 1146, otherwise you may just have to keep searching eBay until something comes up.

  • Thanks 1
arkobugg WRT Addict

arkobugg

Posted
  • Author
Posted
44 minutes ago, Marc said:

First of all do you know what calibre it is? I think it might be an AR1146 but I can be sure.

These people may be able to help, also |Cousins do list some parts for the 1146, otherwise you may just have to keep searching eBay until something comes up.

The caliber are AR  166 or Enicar 1145

arkobugg WRT Addict

arkobugg

Posted
  • Author
Posted

Does somebody knows if the reversing wheels are the same as this :

1488 Pawl winding wheel, complete

1489 Pawl winding wheel, automatic

For this caliber??

  • 2 months later...
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • MariusJacob
      Oldhippy

      By MariusJacob · Posted

      Good to know that Oldhippy is fine.  I wish you a fast recovery, we, the noobs, miss you a lot.
    • HectorLooi
      Citizen 4520

      By HectorLooi · Posted

      Managed to clear the short, cleaned and oiled the movement. Now testing for 24 hours before I case it up. The movement is so small that it's loose in my smallest movement holder.
    • Mark
      Oldhippy

      By Mark · Posted

      @oldhippy - wishing you all the very best of recoveries
    • Mark
      Message board problem

      By Mark · Posted

      Looks like the kind of message that occurs when there are routing issues between your local network and the remote server the site is living on - there can sometimes be 20 or 30 hops and when there are issues some of those hops become unavailable temporarily for some people but for others where there is a different path being used the issues are not manifest. Another explanation, and this used to happen to me a lot with my ISP, is using the ISP DNS servers on your device or router sometimes is not as robust as changing to a public service such as 1.1.1.1 or similar. I was having a terrible time watching Youtube a while back - changed the DNS on my Apple TV to use 1.1.1.1 and problem solved. However, these issues tend to resolve themselves fairly quickly.
    • watchweasol
      Help with repairing a quartz clock

      By watchweasol · Posted

      As mentioned by the other members, it’s a dismantle job clean and inspect the solder joints. It’s an older generation using the paxolin pcb  not the glass fiber ones.
×
×
  • Create New...