Jump to content

Hello everyone!

Andrew1

By Andrew1
in Introduce Yourself Here

 Share

Recommended Posts

Andrew1 New Member

Andrew1

Posted
Posted

Hello everyone, my name is Andrei (it’s easier to just call me Andrew) from Transylvania, Romania. I joined the forums as I intend to try out watchmaking as a hobby. I’ve been collecting vintage pieces for a while now but this whole thing with watchmaking started after I “kind of” repaired my mother’s old watch to celebrate a recent family event.

So the long story short is that my mum bought herself a watch sometimes in the 1970s communist Romania. This was the only watch she ever bought herself and was quite an important expenditure. Being single at a time when the pronatalist policy of Nicolae Ceaușescu was in full effect in the country, she did not benefit of many of the social policies implemented by the communist regime (for example, she had to pay for her flat) and had to also take care of some of her family members. Everything was ok until she broke it by running it over with a baby stroller when I was 1 or 2 years old. Transition period in Romania hit many working class families hard and wrist watches were the least of their concerns. Even today they consider it a dubious way to spend your hard earned money as one may never know when the economy will take a turn for the worse.

As I was collecting time pieces, I offered her to pick whichever she linked but she insisted that she liked best the one that broke several decades ago, and could unfortunately not be repaired (according to one watchmaker at the time). So after a trip to my grandparents’ house, there it was, all broken and messed up, a quartz Orex (Romanian producer) from the 1970s. Now, I know that this might sound awful to some of you, the case and crystal could be restored, but I could not find a replacement movement anywhere. Being pressed for time, I just retrofitted a modern movement in there, meaning I had to also replace the watch hands with some that fit and I had laying around. Good news is that I can undo „the butchering” when I find the right movement. Even better, my mum really did not seem to care about these small matters (for her), what mattered was the gesture and that she enjoys the watch greatly.

So, back to collecting. I guess I collect both watches and, when possible, the stories that accompany them. So no outstanding pieces from a horological point of view but simple, affordable pieces worn by  “run of the mill” working class people from Eastern Europe. Since these watches have no particularly complicated movements, I figured I should be able to eventually service them myself, if it turns out I will have enough patience and skill. For that I plan to start the watch repair course. In the meantime, I will mostly have questions regarding the tools I need to start with in this hobby. Thanks to whoever read this wall of text and I’m looking forward to meet you all. Ps. apologies for any grammatical errors as I am not a native speaker.

  • Like 2
Link to comment
Share on other sites
Gra Watch Enthusiast

Gra

Posted
Posted

Salut Andrei și bine ai venit pe forum.  Povestea mamei tale este foarte emoționantă și sunt sigură că va fi foarte fericită doar dacă va avea ceasul să funcționeze din nou.  După ce m-am uitat pe web, văd că Orel a folosit o mișcare cuarț Miyota în primele zile, multe dintre acestea sunt încă disponibile dacă, după cum spuneți, doriți să o readuceți la specificațiile originale.  În Marea Britanie, o companie numită Cousins stoc Miyota cuarț mișcări de la 3-11 GBP plus livrare, totuși este posibil să vă puteți înlocui de undeva mult mai aproape de casă.  Uită-te la vechea mișcare a numărului de model și ar trebui să poți găsi ceea ce ai nevoie.  Noroc și amabilități Graham

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • AlanB
      Gilding after silver soldering

      By AlanB · Posted

      When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • Neverenoughwatches
      Can anyone identify what this is? Part Two

      By Neverenoughwatches · Posted

      The first one is an Unruh max stake for pushing out staffs
    • JonC
      Can anyone identify what this is? Part Two

      By JonC · Posted

      Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • Zedster
      Roamer Searock Crystal problem

      By Zedster · Posted

      According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
    • JonC
      Dial feet removal

      By JonC · Posted

      When building a new Watch I have tended to use a file to remove the remnants of dial feet that are not needed as many dials come with four feet to accomodate different movements, but this can be a bit messy so now I use this with a great deal more precision as you can use an appropriate bit for the job and keep it very localised.      
×
×
  • Create New...