Jump to content

Need Help for Identifying Movement


Recommended Posts

Hi guys, I'm new to this watch community, I need to repair my Tag Heuer Formula 1 Quartz Chronograph but I have no clue with which ETA quartz movement should I buy for replacement. Hope some kind person would help me out by giving a small breif of the ETA Quartz movement. Thanks any help would be much appreciated

WhatsApp Image 2020-04-11 at 15.57.26.jpeg

Link to comment
Share on other sites

Hello  and welcome to the forum.  With out a picture of the movement (caseback Off) its not possible to identify as there many classes Of ETA movements. With the back off have a look around the plates there should be a logo (makersmark) and a number this is the calibre which identifies the movement.

Link to comment
Share on other sites

If you pop the back off the watch you will be able to see what the movement is as it will be stamped very clearly for you to see mate. Be aware that you might have snags buying an eta movement at the moment what with all the shenanigans going on with the swatch group ok

Link to comment
Share on other sites

42 minutes ago, watchweasol said:

Hello  and welcome to the forum.  With out a picture of the movement (caseback Off) its not possible to identify as there many classes Of ETA movements. With the back off have a look around the plates there should be a logo (makersmark) and a number this is the calibre which identifies the movement.

Thanks for advicing

Link to comment
Share on other sites

No worries, you would probably find a Ronda movement of the exact same specs for a lot less, but then it wouldn’t be Gen all the way through. The choice is yours mate.

Also what is the problem with the movement that is in the watch now???

Edited by transporter
Added
  • Like 1
Link to comment
Share on other sites

2 hours ago, transporter said:

No worries, you would probably find a Ronda movement of the exact same specs for a lot less, but then it wouldn’t be Gen all the way through. The choice is yours mate.

Also what is the problem with the movement that is in the watch now???

Ronda movement works the same as gen one? If so I don't bother changing it? 

Link to comment
Share on other sites

Hang on, so you have a problem with your movement and want to replace it with another ETA, but Ronda might do another movement etc but if they do then you won’t bother to change it.
So what you are saying is that you will leave the watch in a non working state??

 

Link to comment
Share on other sites

1 minute ago, transporter said:

Hang on, so you have a problem with your movement and want to replace it with another ETA, but Ronda might do another movement etc but if they do then you won’t bother to change it.
So what you are saying is that you will leave the watch in a non working state??

 

No bro Hahaha, I'm saying as long as the watch work I don't mind the watch is Franken with other not gen part

Link to comment
Share on other sites

Just now, transporter said:

Ahhhh now that makes sense, have you found out what’s wrong with the movement yet or more to the point what Cal. It is??

Dont have the tool to crank the case open, I plan to buy the correct movement and take it to local watchsmith. But can't figure out which is the correct movement 

Link to comment
Share on other sites

Is it a screw back case? I think it is on a Tag, you can pop the strap apart and then roll up some sticky tape into a ball and use that.
With the watch in one palm, place the sticky tape ball onto the back of the watch and with your other hand press down and twist in an anti clockwise direction.
Ive used this on countless screw down cases including the odd Rolex, I use it in conjunction with a sticky ball and also the correct case opening tools.

 

Link to comment
Share on other sites

2 minutes ago, transporter said:

Is it a screw back case? I think it is on a Tag, you can pop the strap apart and then roll up some sticky tape into a ball and use that.
With the watch in one palm, place the sticky tape ball onto the back of the watch and with your other hand press down and twist in an anti clockwise direction.
Ive used this on countless screw down cases including the odd Rolex, I use it in conjunction with a sticky ball and also the correct case opening tools.

 

I try that, thanks for advising 

Link to comment
Share on other sites

6 hours ago, 0YellowFish0 said:

Hi guys, I'm new to this watch community, I need to repair my Tag Heuer Formula 1 Quartz Chronograph but I have no clue with which ETA quartz movement should I buy for replacement. Hope some kind person would help me out by giving a small breif of the ETA Quartz movement. Thanks any help would be much appreciated

WhatsApp Image 2020-04-11 at 15.57.26.jpeg

As this is a quartz watch, as you haven't had the back off, how do you know that the problem isn't just the need to replace the battery? As an aside, every single picture on the internet that I can find of this watch shows that the date window on the dial lines up exactly with the  4 o'clock index on the dial, where as yours doesn't? I have a strong suspicion that this a 'replica' and not a genuine Tag.....

THIS one for instance, with a Miyota movement has the same date window alignment.....

Edited by JohnD
  • Like 2
Link to comment
Share on other sites

I just wish that people could stop using euphemisms like replica or the even more accomodating 'rep'. Call them what they are, fake, or counterfeit, or just "watch".
And certainly not "Tag Heuer Formula 1 Quartz Chronograph".

Edited by jdm
Link to comment
Share on other sites

8 minutes ago, jdm said:

I just wish that people could stop using euphemisms like replica or the even more accomodating 'rep'. Call them what they are, fake, or counterfeit, or just "watch".
And certainly not "Tag Heuer Formula 1 Quartz Chronograph".

I didn't know it was fake, the watch is given to me as a present, sorry bout tat if I offended you by accident. I don't do much research about the watch. I just wear it as normal until last week it broke. I'm looking forward to invest in watch as a hobby. How can you spot that if you dont mind giving a newbie some tips. I genuinely tot it was a gen the whole time...

 

Link to comment
Share on other sites

42 minutes ago, transporter said:

Well spotted that man, to the OP don’t worry people don’t freak out about reps on this forum, so crack on and whip that back off and send photos. No shame in reps I’ve a few myself, that’s how I got into watches in the first place.

Cool man friendly and nice, I guess me too, rep got me into investing in watches as a hobby

Link to comment
Share on other sites

1 hour ago, JohnD said:

As this is a quartz watch, as you haven't had the back off, how do you know that the problem isn't just the need to replace the battery? As an aside, every single picture on the internet that I can find of this watch shows that the date window on the dial lines up exactly with the  4 o'clock index on the dial, where as yours doesn't? I have a strong suspicion that this a 'replica' and not a genuine Tag.....

THIS one for instance, with a Miyota movement has the same date window alignment.....

Ohh I see, i literally didn't knew it was fake. This was given to me as a present and I don't do much research on the watches. Thanks for letting me know. Becoz my friend suggested me that battery of a quartz can last for years, so it must have becoz of the movement. I did also suspect that becoz it doesn't come with the box but I didn't care at first.

  • Haha 1
Link to comment
Share on other sites

30 minutes ago, jdm said:

I just wish that people could stop using euphemisms like replica or the even more accomodating 'rep'. Call them what they are, fake, or counterfeit, or just "watch".
And certainly not "Tag Heuer Formula 1 Quartz Chronograph”

OOOOOOOOHHHHH, Touched a nerve i see.
Only kidding mate I know some people just can’t abide fakes, reps, replicas, copies, what ever you to call them, but each to their own.

  • Like 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Did the balance run good with the old cock?  if not, 1-Check if the roller table rubs on fork horns, in case you can,t verify anything visually, remove the fork . 2. Check end shake on balance. 3. See if H/S rubs on balance spokes or on underside of the cock or the coil fouls itself. Once you had the balance detached from the cock, you had a chance to check pivots for shortness  or bent or chipped pivots? You ought to check these now. Are you sure jewels in the setting are clean & fault free? Good luck
    • Wasn’t sure where to put this but Because of the problem I have with my hands ( gout in both )I have trouble holding things especially torsion clock hands to remove them, I have tried the usual tools but not impressed with them but to be fair one was for watch hands anyway I see an antique one on eBay so put a bid on it needless to say I was out bid but decided I could make something similar and I must say it works a treat, I decided to thread my one but it looks like the one on eBay was a push operation see last picture. Dell
    • Wearing a big lump of a watch today. Feels like i have a kettlebell on my wrist. Aw no and i promised no more bare leg shots 🤷‍♂️ , good god our lass needs her legs shaving and before anyone asks no she didn't lay the watch on top of my head and take a picture 😅
    • I have a Bergeon set, a Chinese set, and and anonymous set (in aluminium), and all of the handles and winders are interchangeable. There are slight variations in the fit but essentially they all fit and work.
    • I made my own because most people’s hands are different so making your own means you get the most comfortable fit , just hardwood dowling brass tube and a length of HSS. Dell
×
×
  • Create New...