Jump to content

Are wearing the right watch for covid19 ??

canthus
 Share

Recommended Posts

canthus Super WRT Addict

canthus

Posted
Posted

I have always said the older you get (and more forgetful!!) the more info you need on your watch. 

School years - no watch, time in any form does not matter.

Young age - its just for fashion and maybe the 'time' matters now and again. Or maybe a smart watch for all the other rubbish.

Prime working years - 'time and date' so you keep all those appointments, you know the days from your diary or when the weekend starts.

Later years and retirement -  'time, date and day' as you lose track of what day of the week it is, as well as the date.

Covid 19 - no watch just enjoy each day as it happens, you can't go anywhere and the missus will surely remind you of anything important !!

yankeedog Distinguished Member

yankeedog

Posted
Posted

I don't  know..according  to the media  I need a countdown  to the end of the world watch. So far I have only been  able to find them in quartz.

AndyHull Distinguished Member

AndyHull

Posted
Posted (edited)

Nowhere to go, nothing to do, get yourself a blank dial watch.

Fashion-Wrist-Watches-Men-Blank-Dial-Des

.. or maybe one with GPS, so you can track your toilet rolls if someone steals them.

apple-watch-series-4-hr-toilet-roll-1539

.. or maybe something to help us go back in time and sort out the problem before it started.

clock.png

 

Edited by AndyHull
  • Like 1
  • Haha 1
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Hello from Denmark

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • Birbdad
      Regulating is too touchy

      By Birbdad · Posted

      I agree with hector it's probably the regulator curve, it almost always is on these movements. So i work on these movements a lot and iv'e managed to fairly consistently get them running at like 50 degrees more amplitude than that with deltas in the 3 range and on the wrist deviations of sub 1 second a day. They ALWAYS require work to get there though. The main thing is shaping the regulator curve and this is really finnicky and definitely something you practice on a movement you don't care about when you're new (I'm still new) but if the hairspring is flat and the coils are evenly spaced and the regulator curve is properly shaped and it's pretty wild how accurate these movements can get.  But, it does sound like your regulator curve maybe needs a bit of reshaping. You can easily mess up the watch learning to do this so warning if you don't want to live with your current results but I"m not an expert, it's just speculation but there's a pretty easy way to check.  This is a good video showing how to see if your terminal curve is properly shaped. Just make sure the regulator pins are open when you test this.   He takes off the balance wheel to shape it. I do it with the movement disassembled but the balance on the mainplate. I use a homemade tool from a sharpened dental pic to do the adjustments (Tiny tiny TINY adjustments) and i use the regulator pins themselves to sorta brace the spring against to bend it very tiny amounts and just keep checking it by moving the regulator arm down it till it stops moving the hairspring. Taking off the balance wheel over and over again is a good way to slip and destroy your hairspring and will make the process way slower. I try to avoid removing the balance wheel from the cock it on these movements due to how difficult it is to get the hairspring stud back into the balance cock. It's super easy to slip and twist your spring then you got way worse problems.  Since these are mass manufactured and unadjusted the regulator curve is NEVER perfect but once you learn how to reshape them it's pretty easy to do and you can get REALLY low deltas with really low positional error and pretty remarkable accuracy.  Definitely with it powered down and the balance on the movement with both balance jewels in place look across the spring to see if it's perfectly flat, then check the regulator curve how he does it in the video. I would bet money even if it's not your main issue the regulator curve is not ideal also. 
    • Embezelled
      Where it begins

      By Embezelled · Posted

      Thanks. Damn, first breakage. This picture of the movement is from the sale listing.  
    • AdsettsEdberg
      Hello from Denmark

      By AdsettsEdberg · Posted

      Hello all, New member here, hoping  to gain knowledge about something that has been of interest for years.  Cheers!
    • AndyGSi
      Where it begins

      By AndyGSi · Posted

      So the stem is snapped and will need replacing but luckily there's enough left in the crown to unscrew without a problem. Will need to see photos of the movement to identify it.
×
×
  • Create New...