Jump to content

Hello Fellow Horologists

Charlie

By Charlie
in Introduce Yourself Here

 Share

Recommended Posts

Charlie WRT Addict

Charlie

Posted
Posted

My name is Charles, and I am privileged to be part of this fun clan of watch repair fans. I have been servicing watches as a hobby on and off now since the 1990's. I will be in the near future, making it my full time new career. I look forward to learning and progressing, especially in the company of Mark Lovick, a dedicated professional who is giving his great **BLEEP**nal of knowledge to those of us with the same passion. How else better to learn other than attending a full time school? I have posted a new topic on the watch repair section. Cheers to all.

post-351-0-91491900-1412555284_thumb.jpg

bobm12 Distinguished Member

bobm12

Posted
Posted

Hi Charlie, welcome to THE forum! I saw your other post but lacking the experience on that particular issue I decided to let others advise. In any case, this is a nice place, with nice and very helpful people from all over, you will enjoy!

Charlie WRT Addict

Charlie

Posted
  • Author
Posted

Thank-you. I have been enjoying the chat on many fun topics. It's a great feeling when you find an answer to a question that has kept you wondering. I look forward to interacting and the next of Marks excellent videos.

Vich Distinguished Member

Vich

Posted
Posted

Hello Charles and welcome.

 

The more we get in the greater the knowledgebase and I am sure you will enjoy the cameraderie and sharing of knowledge.  I am a hobbyist tinkerer and have been helped on more than a few occasions by different members. I look forward to seeing your posts.

 

Cheers,

 

Vic

Charlie WRT Addict

Charlie

Posted
  • Author
Posted

Thanks for the warm welcome Bob, Autowind, and Vic. I am feeling at home already! Please take a look at my other post in the watch repair section regarding a new, but distorted mainspring problem. Cheers to you all!

Geo Distinguished Member

Geo

Posted
Posted (edited)

Hi Charlie, and a warm welcome from Scotland. I hope you enjoy being part of this community, as the guys have already said it's a great forum!

Oops, I'm getting senile, I forgot I've already welcomed you.

Edited by Geo
Charlie WRT Addict

Charlie

Posted
  • Author
Posted

It's the best forum I have seen on the net. Heaven knows we are all faced with technical questions at times, and that's really where this forum shines. Now, let's see if I get Mark to chime in about my mainspring question. I am very curious as to what his response will be!

Lawson Super WRT Addict

Lawson

Posted
Posted

A warm welcome to you Charles.  I look forward to seeing your posts, and learning from the vast knowledge you must have gain over the last 14 years in this fascinating trade.

Charlie WRT Addict

Charlie

Posted
  • Author
Posted

Well thank-you Lawson. I don't have too many serviced watches to my credit actually, but I continue to have a passion for watchmaking and repair that is ceaseless. My good friend Cary Farnsworth recently received his 1930's watch from me servicing it and said that "it keeps perfect time" That is music to my ears and so inspiring, especially when it was in sad running shape when he gave it to me.

Don Super WRT Addict

Don

Posted
Posted

Welcome from another Californian Charles! That's a beautiful pocket watch movement. Have you worked on it?

 

Don

Charlie WRT Addict

Charlie

Posted
  • Author
Posted

Thanks a bunch Atimegoneby...I will hopefully be posting photos of my time in watch school late next year, fingers are crossed they have room for me as only twelve students are admitted each year.

bobm12 Distinguished Member

bobm12

Posted
Posted

Hi Charles,

 

It seems you are preparing for the Swatch course. There is one near me in Miami. Can you tell me more of what is required and/or what we are expected to do to get in? I'm planning to take this one too but they only admit 8 students.

bobm12 Distinguished Member

bobm12

Posted
Posted (edited)

By the way, I think we have 2 Charles in this thread and both from California! Just in case, I'm welcoming both of you guys! :D

Edited by bobm12
Charlie WRT Addict

Charlie

Posted
  • Author
Posted

The course is in Seattle and it's two years of full time study. It was a WOSTEP school but it is now SAWTA. There is an entrance exam and 5k for the tools alone not including tuition.

bobm12 Distinguished Member

bobm12

Posted
Posted

Yeah, the one here is a WOSTEP school and they ask for 3K. I believe there is an entrance exam too but I've been reading up and there is a lot of paperwork to present that prove you can survive the 2 years without work! I'm really thinking about starting it thou...

  • 3 weeks later...
Charlie WRT Addict

Charlie

Posted
  • Author
Posted (edited)

Well it's over 20k including the 5k for the tools for the SAWTA curriculum in Seattle. Yes...too many forms!!

Edited by Charlie
Vich Distinguished Member

Vich

Posted
Posted (edited)

Hello Folks,

 

I am so glad I am just dabbling in horology and am not faced with the choices you have to make. 

 

I suppose it is investing in your future, a bit like a college fee but that seems like a lot of cash.  I reckon you would also have to research a potential future business and do an income and outgoings strategy to make sure that you can expect a living income after paying all business costs.  These days there might also be quite a lot of repairs/battery changes on quartz stuff if it was watch repairs.  I also expect that if it takes about 6-9 months to actually make a top of the range watch from scratch inclusive of case and bezel etc. being an actual watchmaker is problematic.

It would also, however, be quite something to have the training and talent to sit back and look at a watch you have actually made from scratch - a feeling I will never know !

Sometimes it is good to be retired.

 

Cheers,  Vic

Edited by Vich

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By VWatchie · Posted

      Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • MikeEll
      Help with repairing a quartz clock

      By MikeEll · Posted

      I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...