Jump to content

Rockford Electric

Wesley881

By Wesley881
in Your Watch Collection

 Share

Recommended Posts

Wesley881 Watch Enthusiast

Wesley881

Posted
Posted

Just in from the 'Bay on a second chance offer! I had missed by a dollar before and fate has brought this little gem my way. This is an economy Standard Time Corp. movement and is cousins with the Hamilton 500 or 505(?). I think maybe it shares a balance assy. Loving the clear caseback as well and the offset crown is very comfy. Keeping good time so far but perhaps in need of a cleaning as the balance adjustment is pegged. Also sorting a huge part and tool lot I got in trade for some service work, will post some photos soon.

 

C

 

d1acba6aa9117901e9acded5e8237491.jpga0a825fb9c8ee899215afced5465e1e7.jpg

 

Sent from my SM-G920V using Tapatalk

 

 

  • Like 8
Wesley881 Watch Enthusiast

Wesley881

Posted
  • Author
Posted
I'm loving it so much. Period should be 1960s or maybe 1970s right ? Rarely see a watch from that period with a display case back.
Thanks Chopin, I also jumped on it because I thought the clear back might have been an exhibition or sales special. 60's I beleive.

Sent from my SM-G920V using Tapatalk

  • 3 weeks later...
ricardopalamino Distinguished Member

ricardopalamino

Posted
Posted

Nice watch Wesley . It is similar to the Hamilton 505 . The Hamilton 500 has 2 fingers that provide power to the coil on the balance .

You can go to Electric Watches UK and see the Hamilton electric movements and also the different models .

I didn't see Rockford listed as a maker/manufacturer on the list provided .

  • Like 1
Wesley881 Watch Enthusiast

Wesley881

Posted
  • Author
Posted
Nice watch Wesley . It is similar to the Hamilton 505 . The Hamilton 500 has 2 fingers that provide power to the coil on the balance .
You can go to Electric Watches UK and see the Hamilton electric movements and also the different models .
I didn't see Rockford listed as a maker/manufacturer on the list provided .
I'll have to get on there and take a look. It would be great to find a service manual for the 505.

Sent from my SM-G920V using Tapatalk

ricardopalamino Distinguished Member

ricardopalamino

Posted
Posted

There are free service manuals readily available for the Hamilton 500 and 505 . I would send you the manuals or info on where to get them but I am moving and my primary computer with all that info is in another state . I will look around and see if I can find them , and if I do I will post it .

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • GPrideaux
      Removing the hairspring from a ETA 2846 balance

      By GPrideaux · Posted

      I can't answer your question, sorry, but you probably don't what to transfer the spring to a new wheel. Springs and wheels are paired ("vibrated" together) to get the right timing and transferring the spring to a new wheel is quite likely to see you minutes per day out with no way to correct it. Some may tell you to replace the balance staff, but if you're a beginner you're probably better off sourcing a replacement "balance complete" if you can: staff, roller, wheel and spring already assembled as a unit.
    • GPrideaux
      Bulova Rubaiyat 1920/21

      By GPrideaux · Posted

      I'm sure it's the ancien. My measurements: A = 342. The slight bend in the pivot would make much less than a thousandth of a mm difference to this so I don't think 348 is plausible unless there has been significant wear on the pivots. B is hard to measure without first removing the balance wheel. I measured to the other side of the balance wheel as best I could (263) then subtracted the thickness of the wheel (69) to get 194. This could easily be three or four hundredths out, so 195 looks right. (196 could also be right.) J couldn't be measured. I did my best to measure where the balance wheel has been riveted on and got about 95, so 85 before riveting is plausible. (60 is not.) G again couldn't be measured without first removing the roller. I get 37 where the staff emerges from the roller so 41 at the other end of the taper seems plausible. (43 is also plausible to me.) K = 60. (Definitely larger than 55.)   I've never replaced a balance staff; it'll be a new adventure for me. I'll have to read up on how to maximise my chance of removing the old one without damaging the balance wheel without having access to a lathe. I also need to explore how to remove the roller without damaging it. I won't actually place an order until I've gone through the rest of the movement. With the number of issues I've already found, I'll be amazed if I don't have more surprises in store. There are some watch part suppliers in Australia but nothing like Cousins or Otto Frei or Jules Borel. AllTimeCo is fine for basic parts for modern watches: batteries, bands, some crowns, stems, seals, movements, some tools, etc., but not really anything for vintage watches. Australian Jewellers Supplies is similar. Cousins charges about £9 for shipping to Australia which is about AU$19 and not too bad (considering Australian parcel post is $11) but I still want to minimise the number of times I'm paying it. I need to explore other options closer to home. There may be something in Singapore or China that would have what I want and ship it faster/more economically.  
    • steve1811uk
      Rolex 3135 rate variation with temperature

      By steve1811uk · Posted

      Hi, I just finished the service of a Rolex 3135. Amplitude is great, 295 degrees horizontal after 2 hours and 280 after 12 hours. Vertical positions are 25 degrees down on those. I am however seeing a rate variation with temperature. I have 0 SPD on wrist, say 38 degrees and +7 SPD at 18 degrees room temperature. That equates to +0.35 SPD which is within spec I believe (+-0.5 SPD/ Deg C max). It just seems more than I would expect from such a high quality movement. To put that in context, I see similar rate variation with temperature for a Seiko 7S26. Just wondering what you guys see. Thanks, Steve.
    • Endeavor
      Beginner advice - cleaning in an apartment

      By Endeavor · Posted

      For years I've done it the el-cheapo way (read: cleaning by hand). Bought a 2nd Elma S15(H) ultra-sonic, including proper cleaning-fluids (Elma WF Pro (cleaning) & Elma Suprol Pro (rinse)) and entered a complete different cleaning world. These cleaning fluids are none-water based and not that easy to obtain. Initially I bought these fluids in Germany "SKSONIC" (www.sksonic.de) but last year they stopped shipping international. Perhaps they resumed international shipping? You can always ask them. You could also ask @VWatchie, he lives "next-door". As for the fumes; I use the ultra-sonic in my garage, partly for the fumes, but more for our dog ...... he goes "bananas" when I switch on the ultra-sonic. Oh, next on your list (if you consider watch-repair as a long-time hobby), a Microscope (up to 50x is enough).  Pegwood leaves, observed under the microscope that is, whole tree-trunks behind 🫣 Ultra-sonic, in combination with proper cleaning fluids, takes care of the cleaning.
    • evenflow
      Greetings

      By evenflow · Posted

      Thank you 
×
×
  • Create New...