Jump to content

Silicone Grease (For Gaskets)

rodabod

By rodabod
in Watch Repairs Help & Advice

 Share

Recommended Posts

rodabod Distinguished Member

rodabod

Posted
Posted

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
54 minutes ago, rodabod said:

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

Doesn't say it's silicon grease? 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted

It's like Bergeon KT-22? It says silicon grease but it doesn't smell like silicon? And it's not working very good either? Have used it on gaskets and it makes the gasket stick to the crowntube in no time. Use Seiko silicon grease . That's the best? 

  • Like 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
17 hours ago, rodabod said:

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

That is  a Silicon applicator for gaskets. The foam/sponge is Impregnated with the silicone. I have used these applicators for many years with no issues. The gasket/ring is laid inside & then the lid is closed and twisted a few times to apply the silicone.

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
  • Author
Posted

Thanks. My concern is specifically if the grease is actually silicone or not. I've opened watches with dissolved gaskets before, and it's quite probable that they've been dissolved by hydrocarbon-based greases. This stuff smells hydrocarbon based to me (a bit like shoe polish). 

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
2 hours ago, rodabod said:

Thanks. My concern is specifically if the grease is actually silicone or not. I've opened watches with dissolved gaskets before, and it's quite probable that they've been dissolved by hydrocarbon-based greases. This stuff smells hydrocarbon based to me (a bit like shoe polish). 

I'll be surprised if it is not Silicone. There are different types of silicone for example I have a small tub of "Seiko" silicone which is clear and very tacky. I have also some silicone that I purchased on the cheap from ebay and is it white and does not seem as tacky but it is however silicone. I suspect this is the type of silicone that is used in these pads to allow for easier transfer. 

Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
Posted

Back to your original question I don't really see you can do anything about it anyway if Cousins are insisting it is silicone.

Interesting point you raise though about KT-22. Bergeon don't say their version is silicone, I have some from an American company that doesn't  mention silicone and it certainly doesn't look like silicone. Yet both Cousins and Walshs call it silicone (well, Walshs call it silicon for some reason). Makes me wonder if the word is being used incorrectly to mean gasket grease or something like that?

Stephen

  • Like 2
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
On 11/15/2017 at 5:36 PM, rodabod said:

Is Bergeon KT22 definitely silicone? I've seen it advertised as silicone, but their website does not mention the word "silicone", whereas their other gasket grease does mention that it is silicone. 

Cousisnuk sell it as silicone grease. There is an other Bergeon product called silicon 7 . Interesting i will contact Bergeon and ask. 

Link to comment
Share on other sites
  • 3 weeks later...
ramrod Super WRT Addict

ramrod

Posted
Posted

I guess this begs the question: why is something OTHER than silicone used for case back gaskets if it destroys  them? 

I've had numerous Omega F300 casebacks that I've had to soak in lighter fluid to be able to dig them out of their groove. They were mush and turned into a sticky black mess merely from age.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • swiss2k
      Omega cal. 565 - low amplitude

      By swiss2k · Posted

      No matter what I did, I could not get the amplitude more than 240 deg. At least there is 0.2 beat error and minus 1-2 s/d.  So, probably not the happy end I would have hoped for, but still I think the watch turned out quite nice. You be the judge of that. Thank you everyone for your help!  
    • transporter
      First pendulum clock tinker

      By transporter · Posted

      its used to lengthen or shorten the suspension spring from the front f the clock dial, this in turn will give regulation to the clock. Try inserting a pocket watch key or even better the double ended key for the clock into the small aperture on the dial at the top and turning it, you will see the suspension block either raise or lower. If it raises the clock will run faster if it lowers the clock will run slower
    • dnhb
      First pendulum clock tinker

      By dnhb · Posted

      Grateful for info regarding the nature & function of the horizontal cog and the unit it's on top of in the picture. It meshes with a vertical cog (enclosed in the unit) on the arbour which is supported at its other end by the back plate of the dial unit to which it is not quite perpendicular...
    • Murks
      Digital Watch

      By Murks · Posted

      does anyone knows what type of battery this digital Watch takes?  
    • Neverenoughwatches
      Second hand watch market.

      By Neverenoughwatches · Posted

      Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
×
×
  • Create New...