Jump to content

What type stone is this?

jdrichard

By jdrichard
in Tools & Equipment

 Share

Recommended Posts

Marc Distinguished Member

Marc

Posted
Posted

Looks like a hard Arkansas to me. Hard Arkansas stone is a form of Novaculite which is a microcrystaline quartz.

It is an excellent natural whet stone and is used for the final touching up on your gravers (assuming HSS, not sure how it would perform on tungsten).

  • Like 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted

I used it to reduce the staff pivot size and it did a great job polishing the pivot. Of course i will not know until i finish the other half and install the balance, hairspring and roller. I may jacot the final staff and use my burnishing tool.


Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Looks like a hard Arkansas to me. Hard Arkansas stone is a form of Novaculite which is a microcrystaline quartz.
It is an excellent natural whet stone and is used for the final touching up on your gravers (assuming HSS, not sure how it would perform on tungsten).

Replied above


Sent from my iPhone using Tapatalk Pro
  • Like 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Thats an Arkansas stone. I had a block for tidying screw driver blades and gravers, one like yours for pivot work and a long triangle shape also for pivot work. Just add a spot of oil for best resaults. They will work on tungsten.

Hey, thanks. It does a great job reducing the pivot size.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
  • 3 months later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      What is this tool !

      By mikepilk · Posted

      I was pleased to pick up a selection of some tools on ebay (v cheap 🤣), and they've just arrived,  I've been looking for a crystal press for a while, and this one is ideal But in the selection is this thing - what is it for?  (it's about 3" long) Something to do with stem tubes?  
    • Neverenoughwatches
      AS2063 - hand setting

      By Neverenoughwatches · Posted

      You'll have to strip it back anyway.
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      I think I've heard that more than from just Alex. That doesn't make it right though, but I'm convinced i saw some literature diagram explaining why to do that. There must be good info here in the archives, I'll have to have a dig around. 
    • Bonefixer
      AS2063 - hand setting

      By Bonefixer · Posted

      That will mean dismantling the gear train, which with 5 pivots to align was a pain. Probably going to have to though. I'm convinced it's something to do with the great wheel. 
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      As far as I know, the only time an epilame treatment has potential drawbacks is when something is rubbing on the treated part w/o lubrication in between creating abrasive dust. That is, I don't believe in the method of "running the watch to make a groove through it first in the pallet stones where the lubrication is then placed". So, I think the rule would be; do not epilame treat parts where rubbing is going on without lubrication. Other than that I don't think we have anything to worry about. That said, I'm not an expert, and I'm always happy to learn more. Has any other repairer than Alex suggested or explained the "making-a-groove" method? My impression is that it's just something he constructed in his mind. I have not perceived it as a generally practiced method. Again, I could be wrong!
×
×
  • Create New...