Jump to content

Bench Light

Geo
 Share

Recommended Posts

Geo Distinguished Member

Geo

Posted
Posted

Here's some information on the output of the Cousins LED light as measured by a lux app on my IPhone.

This light is fitted with two rows of LEDs that can be both individually selected and dimmed. The readings were taken with my phone 10" below the light as this is the height I have it when working on watches. I also measured the light colour temperature at the different settings.

One row low setting 1,240 Lux ......... 6600K colour.

Two rows low setting 3,960 Lux ......... 6000K colour.

One row high setting 5,450 Lux ......... 6300k colour

Two rows high setting 20,800 Lux ....... 5600K colour

To give an idea of how it compares with the Cousins small portable fluorescent desktop lamp that I have currently been using.

At the same distance of 10" it gave 3,170 Lux .......5600K colour

At a distance of 5" it gave 30,600 Lux ....... 5600K colour although there was a bright hot spot with rapid fall off at the side. This was the the distance I have been using, and it was a nuisance as it often got in my way.

This has been the best improvement I have made regarding equipment this year. Please remember that these tests are for guidance only as I have not used specialised equipment. I hope you find the information useful.

post-124-0-04677400-1424984076_thumb.jpg

Here's some information on recommended lighting.

post-124-0-02862700-1424984329_thumb.jpg

  • Like 3
  • Replies 212
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Waggy
Waggy

Think it's this one: https://www.aliexpress.com/item/1005001670367765.html?spm=a2g0o.productlist.main.3.2dc850b67RQSnK&algo_pvid=2f946012-60ff-49c9-b4a7-76e0eb3d45a7&algo_exp_id=2f946012-

oldhippy
oldhippy

This is the type of thing I had. No reflection,shadow or heat. I worked on a green background on top of glass.   

Razz
Razz

Very informative thread! After reading through, I ordered a lamp from Amazon. Under $49 US (£39) tax shipping and delivered in 6 hours, yep! This one has 5 intensity levels and 5 color settings from 3

Posted Images

Mark Distinguished Member

Mark

Posted
Posted

It is a truly excellent lamp - I was going to keep it packed away until next week, but I could not resist giving it a test :)

  • Like 3
Geo Distinguished Member

Geo

Posted
  • Author
Posted (edited)

I'm glad you like it Mark, it was well worth the extra few quid over the fluorescent one. :)

Edited by Geo
mwilkes WRT Addict

mwilkes

Posted
Posted

Just ordered one... Can't wait. I've been using two gooseneck single-LED lamps from IKEA...effectively watchmaking in the dark.

 

Suspect Cousins will be wondering why there's a sudden rush on their LED lamps...

Don Super WRT Addict

Don

Posted
Posted

Are there any brand markings or model numbers anywhere on the light? I'd love to find one at a better price for US residents.

Mark Distinguished Member

Mark

Posted
Posted

Well cousins conveniently removed the branding from the box. (Just a thought: Did someone find it cheaper online and call them out?)

2a9534bc6893bb1f9900de1123d141ae.jpg

But here is a pic of the tag on the lamp itself.

2608a5a03cce4d7ac9b9639d4351dd8b.jpg

Hope this helps

Sent from my iPhone using Tapatalk

  • Like 2
Denis Member

Denis

Posted
Posted

Thanks, Mark. Based on the model number,  I found them for sale in Russia and Poland. Strangely not in China. Prices (ex-delivery) approx. £56.2 in Russia and £53.8 in Poland. If anybody interested, I can try to find cost of postage.

Isn't Internet wonderful thing?

Don Super WRT Addict

Don

Posted
Posted

I was also surprised to not see China come up in my search last night. Still not really closer to finding one here. But thank you Mark!

Geo Distinguished Member

Geo

Posted
  • Author
Posted

Mine arrived from Cousins yesterday. It's just amazing. For fun I turned it off and went back to my original lighting. Impossible.

I'm glad you like it! :)

ro63rto Distinguished Member

ro63rto

Posted
Posted

Are there any brand markings or model numbers anywhere on the light? I'd love to find one at a better price for US residents.

Only found this for USA.

fixfindtest.iisonline.com/Home/ProductInquiry.aspx?Ref=Search&Keyword=8015LED-U

clockwatcher WRT Addict

clockwatcher

Posted
Posted

Following Rob's link to the model I note that the manufacturer offers samples - see on right under model name. If any of you has a legit company then this might be a way to collar a few lights at a competitive price. You could sign a few of us up maybe? :-)

cdjswiss WRT Addict

cdjswiss

Posted
Posted

It is a broad strip-light giving fore and aft shadows. I see them in your photo George, admittedly fairly faint. Is it not better to have a circular light source? Mine is a neon tube but surely it must exist now with LEDs? But if not, then this one is the nbt..

Geo Distinguished Member

Geo

Posted
  • Author
Posted

Hi Colin, without having a circular light to compare it with I can't really make comment. All I can say that working on movements has been a lot easier since I installed it. I'm sure others will pitch in when they start using them.

Geo Distinguished Member

Geo

Posted
  • Author
Posted

Would you not have to look through the centre of the light as a camera would with a ring flash fitted, to get the result you are after?

I really don't think you would be disappointed with the linear light fitting Colin.

cdjswiss WRT Addict

cdjswiss

Posted
Posted

Would you not have to look through the centre of the light as a camera would with a ring flash fitted, to get the result you are after?

I really don't think you would be disappointed with the linear light fitting Colin.

This light is 50 cm diameter and would be placed slightly above head height so as to be able to work underneath. Then there is the problem of shadows from the hands, but on account of the distributed light source these would be less obtrusive than from any other more localised source.

 

Yes, George, I am sure that the Cousins light is the best at present on the market for fitting to the bench and I shall buy one for my lathe workshop bench that now has a miserable expensive LED spotlight sold for professional machine use, but very heavy on shadows.

 

Maybe I shall give the circular one a go for my watch tinkering table, although for this, during the daytime, I have hard-to-beat overhead daylight from a roof Velux - except after snow, and we have had plenty this Winter!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • jhoho202
      About repair watch's jewel.

      By jhoho202 · Posted

      First of all, thank you for the pdf file of the book on how to replace a gem. So, if there is a problem with the ruby in the movement, should I buy a new or used movement and replace it? When I watch videos on YouTube of people fixing used watches, I feel like there should be a way to buy a gem. Is there no way to buy it?
    • praezis
      Parts sourcing for FHF 180 movement

      By praezis · Posted

      I suppose @donutdan is not forced to earn his living by repairing watches.  I suppose he does it as a hobby and wants to gain experience, to get better in watchmaking and time is not the issue. Then @donutdan should rather try to repair the damage instead of swap parts from a maybe intact other movement. Swapping parts is not watchmaking. And often swapped parts are not the expected solution of all problems. All mentioned damages are repairable. Frank  
    • Malocchio
      Chinese tools debate

      By Malocchio · Posted

      Yeah I figured that one out when I googled and realized that my spindle is actually from Horia. It's smooth with no screwable cap.
    • JohnR725
      Parts sourcing for FHF 180 movement

      By JohnR725 · Posted

      I am puzzled by something a snipped out something from your image and what exactly disassemble tell us? my confusion is the symbol for FHF looks like image I have below year symbol as a star and righted this instant are not finding what that means? I suppose we could use the fingerprint system to verify it really is what it claimed to be. Size itself is really interesting there's almost no watches in that particular size. Then were missing details in the photograph above like diameter of movements to verify it really is the size and are missing the setting components.   went to the bestfit book looking at the symbols didn't see it. Look at the link below I did find it back to the bestfit book and yes it really is there https://reference.grail-watch.com/documents/history-of-ebauches-sa/ then bestfit book says lists the size as 10 1/2. one of the problems with vintage watches is finding parts yes a donor watch would be good.
    • Simeon
      Oiling Dubois Depraz chrono module pivots (Omega Speedmaster Reduced)

      By Simeon · Posted

      Actually, this could be the issue. Drag from the module could be overcoming the cannon pinion. It was definitely not at the point that the driving wheel was loose on the cannon pinion, it took a little bit of effort to rotate it when applying the grease. Maybe I need to look again at applying oil to the pivots.    Yeah, it's very annoying. I don't want to give up on it, so back on with it over again until I catch a break. 
×
×
  • Create New...