Jump to content

Hello from Sussex

ChrisWheeler
 Share

Recommended Posts

oldhippy Distinguished Member

oldhippy

Posted
Posted

Hello and welcome from me. So how long have you been an apprentice and what stages are you at with watches and how far have you got with clocks. I'm asking this as many years ago that's what I did and eventually ended up restoring the better antique clacks.   

Link to comment
Share on other sites
ChrisWheeler Member

ChrisWheeler

Posted
  • Author
Posted
59 minutes ago, oldhippy said:

Hello and welcome from me. So how long have you been an apprentice and what stages are you at with watches and how far have you got with clocks. I'm asking this as many years ago that's what I did and eventually ended up restoring the better antique clacks.   

I've been an apprentice for almost two years. I'm technically doing a clock pathway course, with my dad teaching me being a clockmaker himself. I'm on striking clocks at the moment. Watches I'm a bit more self taught! Only really working on manual wind watches at the moment, doing an automatic watch course in a few months! I'd definitely like to be working on the high end antiques but I'll work through the rest first ;)

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Striking clocks I expect you started on something like a smiths mantle 8 day strike. Are you up to french strikes and carriage clock strikes. I went from that sort on to chiming clocks, you wait until you get to grandfather clocks. So if your dad is teaching you I expect you are using all of his tools including his lathe. I did a 5 year apprenticeship then 2 years as an improver. 

Link to comment
Share on other sites
ChrisWheeler Member

ChrisWheeler

Posted
  • Author
Posted
On 06/05/2016 at 5:41 PM, oldhippy said:

Striking clocks I expect you started on something like a smiths mantle 8 day strike. Are you up to french strikes and carriage clock strikes. I went from that sort on to chiming clocks, you wait until you get to grandfather clocks. So if your dad is teaching you I expect you are using all of his tools including his lathe. I did a 5 year apprenticeship then 2 years as an improver. 

Spot on! I'm due to start on French striking work within the next month (after my exams next week), carriage clocks there after im assuming. Yeah we have a couple of lathes here, a Cowells 90CW and a Unimat for clock work and I was also fortunate enough to have been left a Lorche 6mm watchmakers lathe buy an old watchmaker we knew well. 5 years is what my Dad did but mine is technically 3 years, although I very much doubt I'll know enough by then!

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

I had a unimat 3 for all my clock work and I found it to be very good, also a Boley for watch work. French movements are fine movements to work on and very good time keepers. Good luck with the exams let us know how you get on.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      I read that same article last night  H.  I think epilame is too much headache for me, sources aren't always accurate, some conflicting. Such is the GRAVITY of this situation, Is it ok if i just STICK  to a thixotropic oil 🤣
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Not sure I follow along. As I stated in one of my previous posts, the epilame will remain intact between rubbing parts as long as the surface is lubricated by oil or grease. Maybe it's just a coincidence, but note how the epilame-treated surface is illustrated in @Waggy's post. It looks like the oil is exposed to a binder (epilame!) so that it can't move sideways.
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      The epilame under the oil will also be removed  Unless the oil makes a barrier between the epilame and the escape teeth 😅 I think i need two strong coffees now 🤣
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      If we use the rub-off epilame method of pallet stones (run dry for a few minutes before applying the epilame) where will the oil go/be transported when it is pushed away from the impulse surface by the escape wheel teeth? Onto the epilame-treated sections of the pallet! Once the oil has been applied/transported to the epilame-treated sections of the pallet where will it then go? Nowhere as the oil will remain on the epilame. So, perhaps the run-dry method defeats its intended purpose leaving the pallet impulse surfaces dry!? If, on the other hand, we do not remove the epilame from the pallet stones where the escape wheel teeth come in contact with them I'd expect more oil to remain where we want it and need it. Yes, I agree, that is the question, and my gut feeling tells me that is exactly the case. Epilame was created to have an adhesive trait and the oleophobic property is just a side effect.  
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Might that be the viscous nature of oil resisting gravity H  ,  we have been comparing water and hydrophobic surfaces which are similar in principle but water is much less viscous than oil. I guess what we trying to discover is if epilame also has an adhesive trait as well as being oleophobic. Plus the oil dropet has very little mass for gravity to work on, like watching tiny water beads that can grip onto vertical glass until they are connected together to increase their mass then run down. Gravity isn't the only factor at play when oil is placed on pallet stones. The oil receives a lot of bashing that may push it out of position ? Thinking about it if the oil stays in position for 10 minutes enough time for the escape wheel to scrape off the epilame , then  a walled in lubrication has been achieved,  the epilame is no longer beneath the oil ( possibly mixed into the oil )
×
×
  • Create New...