Jump to content

Hello from Sussex

ChrisWheeler
 Share

Recommended Posts

Cad101 Super WRT Addict

Cad101

Posted
Posted

They do indeed :DWelcome Chris. Wish I'd been a watchmakers apprentice I might have known what I'm doing then :wacko:

Mick

oldhippy Distinguished Member

oldhippy

Posted
Posted

Hello and welcome from me. So how long have you been an apprentice and what stages are you at with watches and how far have you got with clocks. I'm asking this as many years ago that's what I did and eventually ended up restoring the better antique clacks.   

ChrisWheeler Member

ChrisWheeler

Posted
  • Author
Posted
59 minutes ago, oldhippy said:

Hello and welcome from me. So how long have you been an apprentice and what stages are you at with watches and how far have you got with clocks. I'm asking this as many years ago that's what I did and eventually ended up restoring the better antique clacks.   

I've been an apprentice for almost two years. I'm technically doing a clock pathway course, with my dad teaching me being a clockmaker himself. I'm on striking clocks at the moment. Watches I'm a bit more self taught! Only really working on manual wind watches at the moment, doing an automatic watch course in a few months! I'd definitely like to be working on the high end antiques but I'll work through the rest first ;)

oldhippy Distinguished Member

oldhippy

Posted
Posted

Striking clocks I expect you started on something like a smiths mantle 8 day strike. Are you up to french strikes and carriage clock strikes. I went from that sort on to chiming clocks, you wait until you get to grandfather clocks. So if your dad is teaching you I expect you are using all of his tools including his lathe. I did a 5 year apprenticeship then 2 years as an improver. 

ChrisWheeler Member

ChrisWheeler

Posted
  • Author
Posted
On 06/05/2016 at 5:41 PM, oldhippy said:

Striking clocks I expect you started on something like a smiths mantle 8 day strike. Are you up to french strikes and carriage clock strikes. I went from that sort on to chiming clocks, you wait until you get to grandfather clocks. So if your dad is teaching you I expect you are using all of his tools including his lathe. I did a 5 year apprenticeship then 2 years as an improver. 

Spot on! I'm due to start on French striking work within the next month (after my exams next week), carriage clocks there after im assuming. Yeah we have a couple of lathes here, a Cowells 90CW and a Unimat for clock work and I was also fortunate enough to have been left a Lorche 6mm watchmakers lathe buy an old watchmaker we knew well. 5 years is what my Dad did but mine is technically 3 years, although I very much doubt I'll know enough by then!

  • Like 1
WillFly Distinguished Member

WillFly

Posted
Posted

Welcome from me, Chris - whereabouts in Sussex are you? Any relation to Wheelers of Worthing - a shop I've had great service from in the past?

Cheers,

Will

oldhippy Distinguished Member

oldhippy

Posted
Posted

I had a unimat 3 for all my clock work and I found it to be very good, also a Boley for watch work. French movements are fine movements to work on and very good time keepers. Good luck with the exams let us know how you get on.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • jhoho202
      About repair watch's jewel.

      By jhoho202 · Posted

      First of all, thank you for the pdf file of the book on how to replace a gem. So, if there is a problem with the ruby in the movement, should I buy a new or used movement and replace it? When I watch videos on YouTube of people fixing used watches, I feel like there should be a way to buy a gem. Is there no way to buy it?
    • praezis
      Parts sourcing for FHF 180 movement

      By praezis · Posted

      I suppose @donutdan is not forced to earn his living by repairing watches.  I suppose he does it as a hobby and wants to gain experience, to get better in watchmaking and time is not the issue. Then @donutdan should rather try to repair the damage instead of swap parts from a maybe intact other movement. Swapping parts is not watchmaking. And often swapped parts are not the expected solution of all problems. All mentioned damages are repairable. Frank  
    • Malocchio
      Chinese tools debate

      By Malocchio · Posted

      Yeah I figured that one out when I googled and realized that my spindle is actually from Horia. It's smooth with no screwable cap.
    • JohnR725
      Parts sourcing for FHF 180 movement

      By JohnR725 · Posted

      I am puzzled by something a snipped out something from your image and what exactly disassemble tell us? my confusion is the symbol for FHF looks like image I have below year symbol as a star and righted this instant are not finding what that means? I suppose we could use the fingerprint system to verify it really is what it claimed to be. Size itself is really interesting there's almost no watches in that particular size. Then were missing details in the photograph above like diameter of movements to verify it really is the size and are missing the setting components.   went to the bestfit book looking at the symbols didn't see it. Look at the link below I did find it back to the bestfit book and yes it really is there https://reference.grail-watch.com/documents/history-of-ebauches-sa/ then bestfit book says lists the size as 10 1/2. one of the problems with vintage watches is finding parts yes a donor watch would be good.
    • Simeon
      Oiling Dubois Depraz chrono module pivots (Omega Speedmaster Reduced)

      By Simeon · Posted

      Actually, this could be the issue. Drag from the module could be overcoming the cannon pinion. It was definitely not at the point that the driving wheel was loose on the cannon pinion, it took a little bit of effort to rotate it when applying the grease. Maybe I need to look again at applying oil to the pivots.    Yeah, it's very annoying. I don't want to give up on it, so back on with it over again until I catch a break. 
×
×
  • Create New...