Jump to content

How to tell a Seiko aftermarket dial


Recommended Posts

These are easily available from the Philippines, together with hands, glasses, etc for Seiko 5 and especially diver's, Maybe it's because Seiko used to have a factory there, and the ability to make some parts remained around. General quality is decent, original SKX013 on the left.

P4132657.JPG

But the writing is not so good, especially for the orange color, and the small lettering on the bottom. Also, the "lume" is too thick.

What really gives it away is that luminosity is practically absent.P4132665.JPG

Virtually any "good looking" midsize diver from the Philippines will have these, from there the low price.

 

  • Like 1
Link to comment
Share on other sites

this is informative. i have always had a problem identifying an aftermarket dial on a seiko. and it seems that it is very important on their divers. they can command a higher price if the dial is original.

i purchased a 6309-7049 a month ago. i had wondered if the dial was original. after opening the watch, i was convinced that the dial was, in fact, original. just in case, i posted the question on another forum. the guys there that are far more experienced than me verified it's origiality.

here are the pictures that i posted. apparently, the crispness of the printing and the bevelled date window clinched it. the hands are original as well. i could tell, when i opened the back, that this watch had never even been opened before. more of a gut feeling combined with extreme difficulty in removing the caseback verified it for me.

 

_MG_1271.JPG

_MG_1273.JPG

_MG_1274.JPG

_MG_1276.JPG

_MG_1278.JPG

Link to comment
Share on other sites

it is a "turtle" diver and is generally more desireable than the slimmer skx00x and 7002-7001, etc. divers.

i like them because of their size and overall looks. it's safe to say they are worth much more with an original dial.

Link to comment
Share on other sites

27 minutes ago, ramrod said:

it is a "turtle" diver and is generally more desireable than the slimmer skx00x and 7002-7001, etc. divers.

i like them because of their size and overall looks. it's safe to say they are worth much more with an original dial.

I think they're beautiful watches and to me that is a huge compliment when someone replicates it;)  Best form of flattery!

Link to comment
Share on other sites

A couple of suburbs away from me there's a large flea market choc-a-block with watch sellers selling the usual two-bob watch stuff but a few of them have fakes "under the table".  Their most popular fakes are Seiko 5s, believe it or not.  They sell these as quartz or cheap auto movements with the day/date complication.  I don't understand why someone would fork out thirty bucks for a fake "5" when you can buy a new one for less than two hundred bucks.

Link to comment
Share on other sites

5 minutes ago, stroppy said:

A couple of suburbs away from me there's a large flea market choc-a-block with watch sellers selling the usual two-bob watch stuff but a few of them have fakes "under the table".  Their most popular fakes are Seiko 5s, believe it or not.  They sell these as quartz or cheap auto movements with the day/date complication.  I don't understand why someone would fork out thirty bucks for a fake "5" when you can buy a new one for less than two hundred bucks.

Take a pic when you can. Completely fake 5s are quite rare, I only have seen a picture of one that must have been from the 80s. Proper price of new 5s is about 70 USD,

  • Like 1
Link to comment
Share on other sites

6 hours ago, oldhippy said:

In my time we had fakes not many but nothing like this. If I needed parts I got the proper thing. 

Many Seiko parts are simply unavailable, or may cost more than an entire used watch.

Link to comment
Share on other sites

Just now, jdm said:

Take a pic when you can. Completely fake 5s are quite rare, I only have seen a picture of one that must have been from the 80s. Proper price of new 5s is about 70 USD,

I'll give it a shot when I'm next there but I have a recuperating dog I'm caring for atm and that takes priority.  Also, I'll need to be discreet because I don't want my head kicked in.

Link to comment
Share on other sites

P.S.  As to how they look...anyone who has seen a real "5" would know they are fakes.  They are feather-light, they have poor lettering on the dial and the cheaper quartz ones are just awfully finished.

 

P.P.S.  The fakes aren't hard to get downunder.  Tons of them at various fleamarkets, especially the paid-entrance markets.  You only have to know how and who to ask.  These clowns also sell the usual expensive-brand fakes.  I had to chortle recently because I spotted a PatekP. with "Quartz" proudly marked under the brand script.  I know Patek haven't made a new quartz for a long time.  

The Patek fake WAS nicely finished...tinted glass lens, sculpted dial plate and nice quick-set day and date.  Also had a blue rhinestone atop the crown.  Selling price? $AU45.

Edited by stroppy
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I use on of these Eclipse demagnetisers. https://www.eclipsemagnetics.com/products/workholding-systems/table-top-demagnetiser/ I got fed up with those Mickey Mouse blue things and went industrial You can pick them up on eBay from between £70 to £100. They will demagnetise anything. I mean, anything, from a hairspring to a hammer head. The table is about 5 x 6 inches. You are not going to find anything close to being this good! It will demagnetise the biggest and chunkiest of cases with the movement inside. You'll never wonder again if your demagnetiser did the job.
    • Hi Dean, The solution with the alum for the broken screw is good and is generally used by watchmakers from many years, but You have to take off ALL steel parts from the plate. In some movements, the post for the minute wheel, for example, is made of steel. Deeping partly the plate works too, but some marks may left on the line where the solution doesn't cover the plate. Heating the solution is needed to accelerate the process. With the years, a rich collection of screws gathers and then finding the needed screw is not a problem. But till then it will be helpfull if You get some assorted screws lot. The other option is making screws. This is usually for the ones with specific form and sizes that doesn't meet often. But the skill of making screws is something that will never be unnecessary
    • Haha yes you do have to reel in your bidding enthusiasm Michael. I use a " not enough time policy " to restrict myself or else known as sniper bidding. Decide what you are most prepared to bid and place it 7 seconds before the end, cross your fingers ,job done . The price paid here i would say was top  figure another day could have been $40
    • The question is did Baum and Mercier use that movement.  I know they used other ebouches. I  can't find any evidence that they didn't but that doesn't mean they didn't. 
    • Well my VARIAC experiment worked sort of. By lowering the input voltage I was able to dramatically lower the magnetic field. However try as I might I was not able to demag either anvil. Even wrapped in bubble wrap to ensure it passed through the opening at equa-distance in the hole, the ends still come out highly magnetized. So time to throw in the towel and move on to purchasing the Chinese Elma-like unit from Amazon (I don’t do Ali express since I can’t return stuff if not satisfied like i can on Amazon).  
×
×
  • Create New...