Jump to content

What shall I look for in buying a watchmaker's bench?

swordfish

By swordfish
in Tools & Equipment

 Share

Recommended Posts

swordfish Watch Enthusiast

swordfish

Posted
Posted

Gentlemen (and ladies, if any are here), I seek your advice. I'm ready to take the plunge, and buy a proper watchmaker's bench. I am a hobbyist who has outgrown my desktop mini-bench.

I know that I want a work bench with many drawers. One of my motivations in getting a bench is the fact that my work-related clutter has spread laterally because I have virtually no usable drawer space now.

What else should I look for in a bench? I like the idea of a roller top which I can pull down over work in progress to (1) keep my wife's cats from poking around, and (2) reduce the eye-noise of the work site. Is there a downside to that? What other features should I look for?

If there is a question I've not posed here, but should have, please weigh in with guidance. Thanks to all of you!

—Eric

Youngstown, Ohio

USA

Sent from my iPad using Tapatalk

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

There are purpose build benches that sort of curve around your body. However most don,t use these (such as myself) 

I just adapted a workbench getting it the correct height for me. I use draws & stacking shelves attached to the walls. 

Your space I expect will be different.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

As clock boy stated the height is most important. After about 30 years sitting at the wrong workbench height for me I developed Spondylitis and it put an end to my watch/ clockmaking, I don't want anyone to end up like me. Make sure it is going to be big enough for what you want, you can never have a work bench that is to big because you will begin to use up the space. I would think hard and take a look on this forum some have taken photos of their place of work and posted them. If I were in your shoes I would have a bench made for me, if you are a handy man you could make your own. Light is also very important, what type of lighting are you thinking of. As you said draw space is another, what do you intend to keep in them and will they be big enough for all you want to fit in them. Shelves are good to have I had them all around, what didn't go in draws went on the shelves. If you have a lathe and cleaning machine where are they going to go you need separate space for both. Make sure when you sit you have plenty of leg space, you don't want to be sitting with your knees rubbing the work bench.  

  • Like 3
Link to comment
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      I'm guessing, but this commercial demag machine maybe produces random magnetic fields to re-randomise  the iron particles.
    • Jon
      Chinese clone demagnetizers

      By Jon · Posted

      I've never had a hairspring distort on me by passing the movement or just the balance in a plastic pot over this demagnetiser. Have you seen how fast a cleaning machine spins to spin-off fluid and that does no harm to a hairspring. I was a little concerned when I first used it, thinking it might be too strong, but I was wrong. It is strong, but it does no damage. I pass the part over the demagnetiser and keep going for about an arms length, so about a metre, to properly demag the part.
    • HectorLooi
      Seiko kinetic generator coil

      By HectorLooi · Posted

      I don't think you would be able to find spare parts. Your best bet would be to get a new movement from eBay. https://www.ebay.com/itm/256508500506?itmmeta=01HY3M863PSA61GK7B859QCWTE&hash=item3bb9191a1a:g:ubgAAOSwrJJgPP-s&itmprp=enc%3AAQAJAAAA4DxWhpiQiz2ZjKpm3PS%2FHPh4IafsSzMWEobc2q4qQWgPGMZ8kCR8y2PRsm7GE31FjeSDYSWcEyGlrpZEdQyyzOSgsgsaPjbP7dYmK8r49Nh%2BEtSqDDIZ8Tbp3vvX035fFXgcjc1GEH8l%2FOWJ9aTeWNGzeBgUwqyhJ3ZSXji50TQr6rd38Sqwaqsj2oc51UVKqqIKySKTfxVB7X09EXcJsmeYc5GCdVODNkb02q2RsxfSIzpgl9dFCmW1Ih%2BPg2j2NziSELg5AfaHl%2FPU2Zn9fNnoVN1Z1NUAREyh2BCubcWC|tkp%3ABk9SR_bhoPTwYw
    • Michael1962
      Vertex Dirty Dozen crystal

      By Michael1962 · Posted

      Here's a thought. Try unscrewing the bezel and the crystal. If you have one of those sticky balls for undoing casebacks, I would give that a try.
    • ManSkirtBrew
      Citizen Eco-Drive E870 movement issues

      By ManSkirtBrew · Posted

      Last week I noticed my Eco-drive's second hand was stopped at 12 o'clock. I left it in the sun for a few days and no change, so I figured it was time to replace the rechargeable battery. I've had this guy for at least 15 years. Replaced the battery and the seconds hand moved to about 5 o'clock and stopped there. I let it sit for a day in the sun, no change. I took the battery out and tested it, and it's at 1.4v. The old one was at 1.0v. I'd like to test if it's charging. I've been looking around for diagnostic info, but only been able to find the owner's manual. Anyone have a reference for it?
×
×
  • Create New...