Jump to content

Ridiculous Packaging


Recommended Posts

A certain well known on line sales company that shares its name with a place that has a well known rain forest are always getting mentioned for their packaging, mostly mine has been ok but then - I was puzzled when I saw the delivery man carrying a large box as I had not ordered anything that big. I ordered a couple of batteries from Amazon, packaged they are each approx 9 cm x 12.5 cm x 5 cm and they arrived today in a box 59 cm x 46 cm x 16 cm !

Amazing waste of resources in so many ways but they were delivered quickly.  I will of course recycle it.

Cheers,

 

Vic

Pack2.jpgPack 1.jpg

Link to comment
Share on other sites

As you said Vich, the key word is: Rain Forest. This is a special packaging in case the carrier -- who picks your item up from the warehouse 2 blocks from your house -- has to make a detour -- it is only a few thousand miles -- through the ubiquitous Rain Forest to deliver it, safely. 

Quote: "It is because of the perennial rain occurring in that place -- therefore the name -- your valuable order may get...well "rained". The vacuum created between the actual merchandise and the exterior of the box will repel all of the insidious rain. The extra filling: read packaging material, mainly paper, will wick away all of the detestable moisture that usually accompanies the err, rain(?) ensuring your valuable order to be preserved in a pristine, un-wetted condition. Our research lab in the North Pole has found out that this is accurate. We are working hard with the postal service on a new mailbox design directed to enlarge the official mailbox specifications, and lobbying with the proper government authorities, to make its adoption mandatory. This huge and modified mailbox will be mandatory and used by the different communities/individuals around the world to ensure that our packages can fit. This action will guarantee us to meet our goal: total customer satisfaction. Sincerely,

P.O. THE Amazon In Chief :smiley-face-laughing:"

How about that for an explanation!!!

Cheers,

Bob

  • Like 2
Link to comment
Share on other sites

The reason why they use expansive packaging (yep..."expansive", not "expensive") with rechargeable batteries is because if they explode there is less compression around them to create a bigger blast.  A mostly empty box will absorb some of the hit from a blast, you see.  That's what I was told when I queried the delivery guy as to why my pack of AA Eneloops was packaged in a 30 x 30cm box from the "rainforest".

  • Like 1
Link to comment
Share on other sites

So, stroppy I believe you just hit the nail on the head! Based on Jeff's items experience I will assume, as a general rule, "the smaller the product the bigger the bang therefore the box is chosen proportionally...bigger!" :)

PS. Just having fun here!

 

Link to comment
Share on other sites

i can identify with this. i work for a company that delivers it's own items. the guys that package the items use absolutely no discretion when it comes to packing a box. i've delivered boxes that i can hardly lift, while on the same order, there will be a box packed exactly like the OP's box above. ridiculous.

Link to comment
Share on other sites

Just as an addendum,

When I folded all the packing paper inside the box up to go in the recycling, I weighed  it.   The weight was 1.5 times the weight of one of the batteries and if the large box was then included then the packaging weighed far more than the product.

The batteries were both packes in their small tough thick cardboard boxes and inside the small box the battery was protected in the usual shock proof blown plastic insert - immovable and safe as you could want.

Cheers,

Vic

Link to comment
Share on other sites

image.jpegHere's my experience of ridiculous packaging this week.  It was left by Hermes last week in this state, open at the end and no content.  I don't lay all the blame with the carrier, if the company I purchased the goods from had even run a bit of tape length wise it would never have burst.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Learned a new thing today! 🤓 Looked this up and found this informative document: Watkins-MainspringGauges.pdf
    • Correct one dip is expensive when the chemical is purchased as " one dip " which is why it is mostly reserved for these two small parts as far as information tells us it is mostly tetrachloroethylene. I use it bought as perchloroethyl used in dry cleaning processes, i cant say I'm overimpressed with it though it appears to me to be shellac safe. What may be a better solution for hairsprings is a high lab grade of pure benzine.  IPA is mostly used as a rinse and water displacer and yes it does have the potential to dissolve shellac, personally i would not buy anything that has significant water dilution so 99.9% IPA is the way to go. And lastly the part you are cleaning dictates your choice of cleaning brush, delicate parts like a hairspring requires the finest artist's brush you can find. Plates and bridges can take a little more scrubbing, but always check to make sure the surface is being unharmed. And dont forget a stick of tip benzine soaked correctly shaped pegwood is your mate set up for cleaning dirty jewels and removing stubborn dried up lubrication. 
    • Hello and welcome from Leeds, England. 
    • Den / Dennison is a unit measurement of size this is actually a mainspring gauge . I haven't heard of a pivot been measured in Dennison before.  Though the small thickness gauge is  usually supplied with a Jacot tool and is more accurately known as a pivot destroyer.
    • Could it be an abbreviation for Denier? "Denier (/ˈdɛniər/) or den (abbreviated D), a unit of measure for the linear mass density of fibers, is the mass in grams per 9,000 metres of the fiber. The denier is based on a natural reference: a single strand of silk is approximately one denier; a 9,000-metre strand of silk weighs about one gram." The pivot gauge looks interesting, however I wouldn't trust myself to drive a pivot into a wedge incase it jams and gets damaged/snaps trying to get it free. More a comment on my ability and incompetence than the quality or design of the tool 🤣
×
×
  • Create New...